Only show results in Virginia? Ok

coal power plant Applications

  • Power plant

    coal/oil/gas fired, combined cycle, biomass, wind, solar(PV&CSP), geothermal, waste to energy, etc.

    By Runh Power Co.,Ltd based in Qingdao, CHINA.

  • Premium

    Industrial power solutions for the coal-fired sector

    Without controls, the combustion of solid fuel (coal) to generate power results in the emission of carbon dioxide (CO2), sulfur dioxides (SO2), nitrogen oxides (NOx), particulate matter, mercury, lead, cadmium, carbon monoxide, volatile organic compounds (VOCs), and arsenic. This is why it is critically important for solid fuel power plants to comply with stringent environmental standards by utilizing the optimal technologies for emissions management, environmental air pollution control, and fluid handling and...

    By CECO Environmental based in Dallas, TEXAS (USA).

  • Power Plant & Power Station Emissions Monitoring

    For more than 25 years, coal and biomass fired plants have formed the largest installed user base for Procal CEM systems. Throughout this period, there has been increasing environmental scrutiny and process upgrades, including the near-ubiquitous use of after-treatment systems such as sophisticated FGD and SCR.

    By Procal - Parker Hannifin Corp based in Peterborough, UNITED KINGDOM.

  • Environmental monitoring solution for power plant

    The construction of coal and natural gas power stations is continuing at a steady rate along with older power stations being retrofitted with more effective flue gas cleaning systems. Both the community and environmental protection authorities are paying closer attention to both emission and ambient concentrations around power stations.

    By Ecotech Pty Ltd based in Knoxfield, AUSTRALIA.

  • Solar Energy for Power Plants

    Regardless of whether a power plant runs on coal or natural gas, it has a very large environmental impact. Producing and transporting fuel also requires consuming resources and generating emissions. Stricter environmental requirements and increased energy costs are challenges for the industry. Solar energy can be used to preheat the water, the make-up water and the actual steam process. Solar collectors that concentrate the sunlight provide a lot of advantages for the purchaser. Read more about our products and...

    By Absolicon Solar Collector AB based in Härnösand, SWEDEN.

  • Low emissions auxiliary boilers to coal or otherwise fired power plants

    Whether providing high-efficiency, low emissions auxiliary boilers to coal or otherwise fired power plants across the United States, or heat recovery steam generators to natural gas fired turbine plants you will find Superior Boilers serving the needs of power generation customers for years to come.

    By Superior Boiler Works, Inc. based in Hutchinson, KANSAS (USA).

  • Vertical mixing for coal power plants

    By REDOR sp. z o.o. based in Bielsko-Biała, POLAND.

  • Primary air control for coal-fired power plants

    Power Generation Combustion Air Measurements: The need for accurate, repeatable & reliable combustion air measurements in power generation plants is critical to efficient operation and safety throughout the entire facility and processes. Coal-fired power plant applications pose a number of challenges to obtaining these critical flow measurements includ¬ing large ducts, limited metering runs, poor velocity and temperature profiles, high vibration, temperatures up to 750° F and dirty `Fly Ash` laden air.

    By Kurz Instruments, Inc. based in Monterey, CALIFORNIA (USA).

  • Premium

    pH value and conductivity measurement for power plants

    Growing populations – about 80 million every year – and industrializing countries create huge needs for electrical energy. According to the International Energy Agency (IEA) the global energy demand will increase by about 65% by 2035. A major fraction of the required energy will continue to be provided by thermal – mainly fossil fuel-fired and nuclear – power plants. "Renewable" energy sources such as photovoltaics (PV) will be another backbone of our energy supply. Putting renewable...

    By Metrohm AG based in Herisau, SWITZERLAND.

  • Alternative Fuel Production for Energy / Substitute Fuel Production for Energy

    Being driven by new legislation, the production of substitute fuel/alternative fuel will be gain momentum in the next few years, as well as the expected increase of recycling rate in municipalities. This means a lot of waste streams can be turned into alternative fuel for the coal fired power plant, cement and lime industry, biomass power plant, or other industrial boiler systems that still burning fossil fuels.

    By eFACTOR3 LLC based in Pineville, NORTH CAROLINA (USA).

  • Premium

    Flow & Energy Management Solutions for power & thermal plant

    Spire Metering is a great fit for Power Plant, Thermal Energy Production Plants.

    By Spire Metering Technology, LLC. based in Marlborough, MASSACHUSETTS (USA).

  • Premium

    Solutions for power generation infrastructure sector

    As the owner-operator of power generation facilities, your plants and supporting infrastructure are critical to your success. Our solutions span the entire asset lifecycle from design through construction and into operations. Coordinate capital projects and revamps, whether managed directly or through contractors, with solutions for multi-discipline design and analysis and project collaboration. You will bring new plants into production more quickly and manage revamps with confidence.

    By Bentley Systems Incorporated based in Exton, PENNSYLVANIA (USA).

  • Magnets for the power station industry

    Large Magnets (Usually Electromagnets as shown) are often supplied to remove ferrous contamination from raw feed stock in Power Stations, such as Biomass or Coal.

    By Master Magnets Ltd based in Redditch, UNITED KINGDOM.

  • Premium

    Control corrosion for power plants

    By InduMar Products, Inc. based in Houston, TEXAS (USA).

  • Premium

    Analytical and measuring instruments of energy and chemicals industry

    Energy comprises many types of modes by using complex processes to explore, extract, refine, produce and transport these products. The energy industry comprises: Fossil fuels: coal, petroleum and natural gas (conventional as well as hydraulic fracturing), including liquid propane gas and liquid natural gas. Non fossil fuels such as: hydroelectric, battery technology, hydrogen fuel cells, nuclear power. Renewable fuels such as: biofuels, hydrogen fuel cells, geothermal, solar (photovoltaic). Nuclear power.

    By Shimadzu Scientific Instruments Inc based in Columbia, MARYLAND (USA).

  • Premium

    Dosimetry Management Solutions for Dosimetry in the Nuclear Industry

    Dosimetry management aims to supervise the radiation dose received by workers in controlled areas in nuclear power plants and also in all types of industries exposed to radioactivity.

    By Bertin Instruments SAS based in Montigny-le-Bretonneux, FRANCE.

  • Fly Ash Drying

    In tune with industry trends, public scrutiny, government regulation, water constraints, etc., coal power plants here and abroad are striving to eliminate their ash ponds and replace them with dry solutions. If you are considering a transition from wet to dry ash handling, Vulcan® Systems can help. Vulcan® Fly Ash Drying Systems are custom-designed and manufactured to suit the customer's individual project needs.

    By Vulcan Drying Systems based in Moberly, MISSOURI (USA).

  • Process design & engineering services for power sector

    Each Power Plant is unique in its own way based on feed material, capacity and power output. Proxion Process provides services that are carefully tailored to meet a plant specification and requirement. From expert consultant services to technology to comprehensive project management, field service and technical support, Proxion Process offer comprehensive safe, reliable and cost-effective solution. Our aim is to improve plant availability, productivity and competitiveness.

    By Proxion Process based in Manchester, UNITED KINGDOM.

  • Premium

    Gas monitoring for power generation applications

    Thermal power generation involves the combustion of a fuel to raise steam and drive a turbine to produce electricity. AMETEK Land provides the high-performance temperature measurements, emissions monitoring and safety systems demanded by this industry. High-accuracy measurements of temperature and flue gas composition are essential in optimising the combustion process, regardless of fuel used. Our instruments also help control pollution, and provide essential safety monitoring. With more than 60 years’...

    By AMETEK Land based in Dronfield, UNITED KINGDOM.

  • Ammonit Solar Resource Assessment Systems

    In order to assure well-founded decisions in designing profitable solar power plants, the solar irradiance should be measured in the assessment phase. Irradiation is a crucial parameter for site selection and plant design and economics of plant. There are many different ways and technologies to measure the irradiance phenomena that influences the power generation of a future solar power plant. Ammonit’s solutions are designed to meet the latest standards with regard to accuracy and affordability of the measurement.

    By Ammonit Measurement GmbH based in Berlin, GERMANY.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you