Applications in Germany

  • Premium

    Humid, corrosive and malodorous waste gases

    CTP's expertise with different coating systems, and an energy-saving pre-heater, protect the installation from corrosion even when waste gases are humid.

  • Premium

    Recycling Solutions for dissolving pulp production

    Demands for environmentally friendly fiber sources have dramatically increased the interest in utilizing dissolving pulp, particularly in textile processes. ANDRITZ has a cost-effective approach to dissolving pulp production that includes a new continuous auto-hydrolysis cooking process coupled with efficient washers and other proven downstream pulp processing equipment.

    By ANDRITZ MeWa GmbH based in Gechingen, GERMANY.

  • Premium

    Water monitoring technology for hydropower

    Monitoring the impact of Hydropower plant activities on water bodies can be important for regulatory compliance and modeling purposes.

    By The OTT Hydromet Group based in Kempten, GERMANY.

  • Premium

    Measuring the Biofuel Blend Ratio in Gasoline and Diesel Fuels

    As more mandates for a minimum of ethanol in gasoline and biodiesel in diesel come into effect, major oil companies are blending higher percentages of biofuels at their terminals. A quick analytical measurement method to assess the blend ratio can be a valuable asset for fuel distributors, engine manufacturers, fleet operators, and regulatory agencies. The InfraCal Biodiesel and Ethanol Blend Analyzers offer a quick way to verify that fuel blends are on spec. They are ideal for use for non-technical personnel and measurement results take less than one minute.

    By Spectro Scientific Distributor in Iphofen, GERMANY.

  • Premium

    Measurement of oil content of oil bearing algae used for biofuel production

    We assist the rapidly growing global biofuels industry through our MQC analysers, speeding up analyses by up to 250 times, and dispensing with the need for hazardous solvents and skilled operators required for traditional methods such as soxhlet extraction and chromatography. Benchtop, non-destructive single seed analysers enable seed breeders to select the highest oil bearing single seeds, accelerating the breeding of high oil bearing seeds for biofuel purposes by up to five years. Typical seeds are Jatropha and Camelina; our breadth of applications capability allows almost all seeds to be characterised. Benchtop seed analysers allow seed co-operatives and biofuel crushers/processors rapidly and accurately to measure the oil and moisture content of biofuel seeds. This enables farmers to be paid according to oil content, and crushing/oil processing to be optimised for the oil and moisture content to achieve the highest quality biofuel output.

    By Oxford Instruments plc Distributor in Wiesbaden, GERMANY.

  • Low-temperature belt dryer for sawdust, pellets, wood chips and other biomass products

    Low-temperature belt dryer for sawdust, pellets, wood chips and other biomass products

    By STELA Laxhuber GmbH based in Massing, GERMANY.

  • Waste shredding for the biomass industry

    Companies engaged in biomass processing are increasingly adopting stationary pre-shredder technology to increase the delivery of consistent, specific carbon-neutral biomass energy products. This selected fuel is attractive to operators of incineration facilities who are keen to reduce their overall carbon emissions.

    By Metso Recycling Equipment based in Duesseldorf, GERMANY.

  • Environmental technology for oleochemistry industry

    The development and the application of these systems in this area were based on the idea of environment-friendly and reliable vacuum systems. Körting vacuum systems are suitable for diverse process steps such as drying, destillation, fractionating as well as transesterification during production of biodiesel, fatty acids, soaps and glycerine.

    By Körting Hannover AG based in Hannover, GERMANY.

  • Wind Farm Noise Assessment by XL2

    One of the largest acoustic consulting firms in Australia was engaged by the New South Wales Department of Planning & Industry to conduct wind farm noise assessments. The goal was to perform a specialist, independent acoustic compliance audit of three major wind farms located near Canberra, Australia’s capital city. The objective of the study was to conduct a detailed noise assessment at residential dwellings near to the wind farms. Three wind farms near Canberra, Australia, were investigated. XL2 Sound Level Meters were operated on a continuous basis, typically over a six week period at each wind farm. The XL2 was battery powered to enable continuous noise logging for two weeks at a time at each residential site. The recorded data was then processed in accordance with the relevant standards specified in the conditions of consent for wind farms.

    By NTi Audio AG Office in Essen, GERMANY.

  • Ammonit Wind Resource Assessment in Cold Climates

    For wind resource assessment campaigns in regions with long and cold winters, special measurement systems have to be designed. The challenges of cold climate regions should never be underestimated. Particularly icing is a problem. The met mast construction and the installed sensors have to be chosen carefully. The instruments have to be properly heated by a reliable power system. With our long-term experience in wind measurement and our local installation partners we can offer complete measurement systems robust enough for harsh and cold climates. Ammonit offers standard heating systems as well as individual heating solutions, which combine several power sources suitable for the site.

    By Ammonit Measurement GmbH based in Berlin, GERMANY.

  • Our technology options at a glance

    Click here to find out more about our technology and discover our interactive animation: http://www.envitec-biogas.com/microsite_envitec/#en

    By EnviTec Biogas AG based in Lohne, GERMANY.

  • Energy Storage

    The K&S Engineering company as a technology 'know-how' supplier has prepared algorithms for optimizing energy storage systems and developed a new simulation tool for it. Using this special simulation software, not only the major yield forecasts for the investors are done in detail, but it is also possible for the applied control algorithms to perform optimizations. With this, K&S offers a consultancy service combining photovoltaic-energy-storage-system design and the perfectly match of the upcoming control algorithms to be applied. As a supplementary service for investors and banks, K&S performs a technology and supplier evaluation in an technical risk assessment regarding the project. A first project with >30 MWp installed capacity in Japan with special requirements of the energy supplier and a nearly 20 MW battery power has already successfully been modeled by the K&S experts. For mor details please visit www.krugundschram.com

    By K&S Ingenieurpartnerschaft Krug & Schram based in Munich, GERMANY.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you