Applications in Italy

  • Premium

    International testing for biofuels

    Sustainable use of biofuels requires reliable and precise analytical methods throughout – from the choice of raw materials through to process optimization and on to the compliant final product. As a leading manufacturer of instruments for chemical analysis, we are quite aware of these challenges.

    By Metrohm AG Distributor in Origgio, ITALY.

  • Premium

    Monitoring solutions for the flue gas desulphurisation

    Most large coal fired plants have a flue gas desulphurisation (FGD) plant to lower SO2 levels to below emission limit levels. The CODEL GCEM 40 series is used to monitor SO2 levels after the FGD to ensure they are below required levels and to ensure that the process is not too efficient and using too much sorbent. In addition, many plants monitor pre and post the FGD to ascertain the efficiency of the plant.

    By Codel International Ltd Distributor in Oleggio, ITALY.

  • Premium

    Compressed air, gas and vacuum solutions for biogas/biomethane

    Customers benefit from the extensive know-how that AERZEN has gained from decades of experience in the chemical and petrochemical industry. The use of biogas as an energy source will considerably help achieve the environmental objectives set nationally and internationally; be that reducing reliance on nuclear energy or the reduction of CO2 emissions.

    By Aerzener Maschinenfabrik GmbH Office in Milano, ITALY.

  • Premium

    pH value and conductivity measurement for power plants

    Growing populations – about 80 million every year – and industrializing countries create huge needs for electrical energy. According to the International Energy Agency (IEA) the global energy demand will increase by about 65% by 2035. A major fraction of the required energy will continue to be provided by thermal – mainly fossil fuel-fired and nuclear – power plants. "Renewable" energy sources such as photovoltaics (PV) will be another backbone of our energy supply. Putting renewable energy on the grid requires powerful energy storage and conversion devices, such as supercapacitors, batteries, or fuel cells.

    By Metrohm AG Distributor in Origgio, ITALY.

  • Premium

    Portable and fixed gas analysers for agricultural waste AD (large scale)

    Large agricultural processors install AD plant to generate revenue and dispose of biodegradable waste, which is usually a single type.

    By Geotechnical Instruments (UK) Ltd Distributor in Milano, ITALY.

  • Premium

    Monitoring solutions for the flow combustion efficiency areas

    Combustion efficiency is of major importance on small boiler plants and the best way to monitor this is by monitoring CO2 emissions. CODEL offer the Model 1010 Cross-Duct CO monitor. Using Infra-red Gas Filter Correlation technology to filter out interferences such as dust and other gases. The Model 1010 has low maintenance requirements and meets the needs of most boiler applications. In addition to small boilers the Model 1010 is also used on Animal carcass incinerators and Crematoriums.

    By Codel International Ltd Distributor in Oleggio, ITALY.

  • Premium

    Electrochemical solutions and water technologies for renewable energy storage

    Energy storage in batteries or chemical fuels such as hydrogen or synthetic natural gas (produced through water electrolysis) will be crucial to the worldwide large scale deployment of fluctuating renewable energies.

  • Premium

    Flame ignition for flares

    By AEREON Office in Vecchiano (PI), ITALY.

  • Premium

    Evaporation technology for biogas and biofuels industries

    Combining industrial performance and sustainable development while remaining competitive requires that the biofuels and biogas industry ensure industrial process safety, reduce operational costs, implement solutions providing significant savings and comply with environmental regulations, which ultimately lead to the public’s acceptance of a site.

    By EVALED-Evaporator based in Zoppola (PN), ITALY.

  • Premium

    Recycling Solutions for dissolving pulp production

    Demands for environmentally friendly fiber sources have dramatically increased the interest in utilizing dissolving pulp, particularly in textile processes. ANDRITZ has a cost-effective approach to dissolving pulp production that includes a new continuous auto-hydrolysis cooking process coupled with efficient washers and other proven downstream pulp processing equipment.

    By ANDRITZ MeWa GmbH Office in Schio (VI), ITALY.

  • Premium

    Application package FLUXANA Ash

    This application package is a 'ready to go' calibration kit for xrf instruments. Fusion technology is ideal for analysing oxidic materials like ashes. It performs with the highest precision possible in xrf sample preparation. Primarily power stations and their control laboratories have to check the ash from the burning process of black and brown coal. Two standard DIN and ASTM methods describe the testing in detail. FLUXANA is able to deliver both methods ready from the bench. It can for example contain all parts to perform a complete ash analysis: - Calibration set ash prepared from CRM and primary oxides as glass beads - Calibration work performed by FLUXANA expert 3 days on site - 3x drift monitors for xrf instrument - 7x control samples for validation - Flux FLUXANA application packages include always the sample preparation method. If you combine our application packages with our sample preparation machines we guarantee the analytical performance of the package like a contract.

    By Fluxana GmbH Co. KG Distributor in Osnago, ITALY.

  • Premium

    Machine condition monitoring for power generation

    Power plants are expected to operate 24 hours per day, 7 days per week. Downtime and equipment derating (when a generator fails to deliver power at its rated capacity) can cost a power plant thousands of dollars per hour. The cost of replacing failed equipment is also extremely high. Vibration analysis by itself is not enough to anticipate catastrophic failures. Oil analysis is often able to detect problems at a much earlier stage than vibration analysis. This is why more and more power plants are bringing oil analysis capabilities in house.

    By Spectro Scientific Distributor in Firenze, ITALY.

  • Premium

    Heat transfer products solutions for the power generation industry

    Combining highly-experienced industry experts and a state-of-the-art research center, EVAPCO is constantly developing next generation technology for wet cooling tower systems, dry air-cooled steam condensing, and hybrid systems.

    By Evapco Inc. Office in Passirana di Rho, ITALY.

  • Premium

    Evaporation technology for photovoltaic & microelectronics industries

    The manufacturing process of the cells that make up the photovoltaic systems and the printed circuits require water in quantity and high quality. This water has to be managed wisely so as not to affect the productivity and the expenses of the plant.

    By EVALED-Evaporator based in Zoppola (PN), ITALY.

  • Premium

    Sensor for Biogas

    Anaerobic Digestion plants produce various gas components from a source material (or feedstock) that can be composed either solely or as a mixture of slurries, purpose-grown crops, food and organic waste material. The composition of the gas produced varies depending upon the feedstock and the Anaerobic digestion process itself. As a consequence, it is normal to measure various components of the resultant gas produced to evaluate the efficiency of the Anaerobic Digestion process. Furthermore, due to the flammable nature of Methane (CH4), and the risk of asphyxiation, most plants feature ambient air monitoring to protect personnel from any unplanned accumulation of leaked gas. CH4 is the gas component fuel, which is the intended end product of the anaerobic digestion process. In biogas plants, the concentration of CH4 in a working plant varies between 50%-75%, which is well above the Upper Explosive Limit (UEL).

    By Edinburgh Instruments Ltd Distributor in Brescia, ITALY.

  • Premium

    Gas Sensing for Gasification

    Syngas (short for synthetic gas) can be burnt and used as a fuel source, the main constituents of syngas are Carbon Monoxide (CO) and Hydrogen (H), which amount for around 85% of Syngas, and it is produced by a process called Gasification. Gasification starts with a base material which can originate from a wide variety of materials for example wood chips and pellets, plastics, municipal solid waste, sewage, waste crops, and fossil fuels such as coal. During Gasification the base material is reacted at high temperature without combustion with controlled amounts of oxygen (O) or steam. The composition of the base material combined with the amount of oxygen and heat used in the process affects the composition of the resultant SynGas, in which the CO can vary between around 20 and 60%. In addition, large amounts of H and CO are also formed. The measurement of CO is therefore an important feature in the production of SynGas.

    By Edinburgh Instruments Ltd Distributor in Brescia, ITALY.

  • Premium

    Multiparameter Monitoring for the Renewable Energy Industry

    Site surveys for tidal, wave and wind based renewable energy projects will require instruments to measure standard physical parameters before, during and post installation.

    Fine tuning of the generating method is also reliant on data from sensor packages to maximise the source energy required for profitable installations.

    By Valeport Ltd Distributor in Zola Predosa, ITALY.

  • Premium

    Measuring the Biofuel Blend Ratio in Gasoline and Diesel Fuels

    As more mandates for a minimum of ethanol in gasoline and biodiesel in diesel come into effect, major oil companies are blending higher percentages of biofuels at their terminals. A quick analytical measurement method to assess the blend ratio can be a valuable asset for fuel distributors, engine manufacturers, fleet operators, and regulatory agencies. The InfraCal Biodiesel and Ethanol Blend Analyzers offer a quick way to verify that fuel blends are on spec. They are ideal for use for non-technical personnel and measurement results take less than one minute.

    By Spectro Scientific Distributor in Firenze, ITALY.

  • Premium

    Precision moisture analysis instruments for measuring moisture and ash in biomass

    If you produce or consume biomass fuels, you know that quality is critical to your success, and you know that moisture and ash content control are critical to biomass fuel quality. Too much moisture and you get poor efficience and high emissions. Too much ash and you get fouling and slagging. And if either of those is uncontrolled, purchase contracts can fall through. Computrac can help.

    By Arizona Instrument LLC Distributor in Cernusco S/N Milano, ITALY.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you