gas burner Articles

  • Burner Efficiency

    The Customer The Company is a world leader in combustion technology. They design and manufacture burners for residential, commercial and industrial applications. The Process After the burners have been manufactured they must be tested to meet the standards of BTS-2000. This standard specifies the methods procedures for determining the performance and ...

  • Are GAS-FIRED Burner Technologies Really The Best Choice for ISTR Cleanups?

    Its an exciting time. In-Situ Thermal Remediation (ISTR) shows great promise and has proven to be an extremely effective method for cleaning a wide range of Contaminants of Concern (COC’s) at contaminated sites. Most recently, gas-fired soil heating technologies are entering the market with promises of much cheaper natural gas heating, faster setup and heating times, less heaters required ...


    By Soil-Therm Equipment, Inc.

  • Low-Nox Burner retrofit Experiences in Cracking Furnaces at Dow, Terneuzen

    Abstract: Dow Benelux B.V. (Dow) operates three ethylene plants from the Netherlands, all based within its Terneuzen facility. In 2009, Technip Stone & Webster Process Technology (Technip) studied options to reduce the NOx emissions from the cracking furnaces of cracker 1. The results of this study, combined with the experience elsewhere within the Dow Chemical Company, have been used to ...

  • Gas Fired Oven

      INDUSTRIAL GAS FIRED OVEN   CONSTRUCTION An industrial Gas Fired Oven is typically of steel construction, comprised of inner and outer shells of sheet steel panels, separated by 4” thick, 6 lb/ft3 density mineral wool insulation.  The panels are constructed as to minimize metal-to-metal contact between inner and outer shells and reduce heat flow from ...


    By Epcon Industrial Systems, LP

  • High temperature combustion of landfill gas

    Type     Compact plant HOFGAS® - Efficiency 250 Commissioning     December 2001 Site     Storkohmo landfill, Kokkola (FIN) Situation Storkohmo landfill is located 400km north of Helsinki on Finland's west coast near the city of Kokkola. Based on local legislation requirements ( reduction of green house gas emissions ) the ...


    By Hofstetter BV

  • European Oil and Gas from Exploration to End User

    Made up of a team of senior specialists dedicated to innovation and dependability in the field of combustion technology; CS Combustion Solutions' (CS) staff use their 25 years of expertise in engineering, supplying and commissioning of vertical and horizontal combustors for a wide range of applications to find the best results for each individual requirement. "We are a company that specialises in ...

  • Optimizing The Operation And Material Selection For Fluorinated Waste Gas Incineration

    A thermal oxidizer system is used by Honeywell Specialty Chemicals to reduce organic and acid gas emissions from their fluoro-products plant. The thermal oxidizer system consists of a multi-gas fired vortex burner mounted on a vertical residence chamber. ...

  • Very large waste gas volumes with low contaminant concentration - Case Study

    Example: Electronics industry Similar tasks: Paint shops, spectacle coating, coating on the inside of cans The electronic industry produces semiconductors that generate very large waste gas streams that are only slightly contaminated. These waste gas streams are purified in rotary adsorbers. The continuous regeneration of the adsorbers generates highly contaminated ...

  • Tips for turning a coal fired boiler to gas fired boilers

    Smog has been a heated topic among the word. Therefore , gas fired boiler substitute for coal fired boiler become a trend to protect the environment.Since the boiler is a large thermal equipment ,it is requires attention to security incidents in the transformation .Here are some tip from ZG about turning a coal fired boiler to gas fired boiler. First , when turning a coal fired boiler to gas ...

  • Rectify dry cycling of gas boilers and reduce energy costs by 25%

    Building engineers, energy and facilities managers tend to overlook that many gas boilers waste energy through dry cycling when they are not actively contributing to the building heating and hot water demand. It is often thought that existing building management systems (BMS) and building energy management systems (BEMS) are optimising the boilers to remove dry cycling. However, the BMS is ...


    By Vital Efficienci Ltd.

  • Several waste gas streams: Short, high concentration peaks and a constant medium concentration - Case Study

    Example: Production of synthetic resin Similar tasks: Chemical industry, batch processes in the pharmaceutical and plastics industry The production of high quality synthetic resin for marine paints and varnishes, coatings and repair materials, involves different waste gas streams. In addition to waste gas with a medium level of contamination, there is also a highly ...

  • Maxsys Fuel System generates 6% savings on Gas Fired Steam Raising Boilers at Mondi Packaging

    Mondi is one of the world’s leading international paper and packaging groups with a substantial global presence, employing 34,000 people at 112 sites across 34 different countries. The company is continually striving for a consistent high level of improvement in environmental performance in all its operations, making efficient use of raw materials and energy, while focusing on innovation ...


    By Maxsys Fuel Systems Ltd

  • A cost–effective backward Lagrangian method for simulation of pollutant formation in gas turbine combustors by post–processing of complex 3D calculations

    A backward Lagrangian Monte Carlo modelling is proposed to calculate by post–processing the PDF of the thermo–chemical parameters of complex turbulent reactive flows simulated with a simple turbulent combustion model. PDF's of minor species such as pollutant species (NOx, soot, unburnt hydrocarbons...) can be easily obtained as long as these species have no significant influence on the main ...


    By Inderscience Publishers

  • Gas boiler load optimisation controls can rectify dry cycling and reduce energy costs by 25%

    Dry cycling of gas boilers can waste a great deal of energy, even when BMS optimisation is in use. Installing gas boiler load optimisation controls can reduce this waste and help boilers run more efficientlyBuilding engineers, energy and facilities managers tend to overlook that many gas boilers waste energy through dry cycling when they are not actively contributing to the building heating and ...


    By Vital Efficienci Ltd.

  • Development of an energy efficient curtain flame ignition system for sintering of iron ore fines

    Research and Development Centre for Iron and Steel (RDCIS) of Steel Authority of India Limited (SAIL) has developed a 'curtain flame' ignition system for sinter mix ignition. Conventionally, either horizontal fired burners or top fired or a combination of both are used for ignition of sinter mix. These burners big in size but few in number are mounted on a rectangular box type furnace. This is ...


    By Inderscience Publishers

  • Redundant combustion plant for Novartis

    Type     HOFGAS®- IFM4c/2200/1500/60/180 Commissioning     2004 Site     Novartis (Basel, CH) Situation In order to prevent production failure due to missing redundancy in the flue gas clean up, Novartis required an additional system. During different production processes exhaust air load with organic components is formed. ...


    By Hofstetter BV

  • 1:60 Control Range with Flare

    Type     HOFGAS®- LPM 3000/2500  Performance     2,500 Nm³/h, 12,500 kW Location     Central England (GB) Initial Situation The landfill site is situated in the middle of the Sheffield region. Over time, the city limits and the landfill site have grown together. Therefore, the operator is particularly ...


    By Hofstetter BV

  • Saving waste in the boiler house

    Burner technology has improved greatly in recent years. Older Burners had a series of cams and levers that were calibrated to provide specific amounts of air for a particular rate of firing. Being mechanical items, these wore and sometimes required calibration. They, therefore, had to be regularly serviced and calibrated. Generally, new burners use frequency controlled motors and cams to open air ...


    By EBE Engineering Ltd.

  • Biomass gassing as an effective source of energy

    Type     HOFGAS®- IFM4c 4000/2100 Performance     2100 Nm3/h / 3500 kW          Location     Limoges (FR) Situation A prestigious gassing plant for biomass is being built in the heart of France. The owner is promising himself a significantly higher level of efficiency through ...


    By Hofstetter BV

  • 5000Nm3/h HT Flares in Sao João, Brazil

    Type      HOFGAS®-Efficiency 5000 Performance     3x 5,000 Nm3/h, 75,000 KW Location     Sao João (BR) Technical requirements Surplus combustion of 15,000 Nm3/h landfill gasCompliance with the UNFCCC regulationsHigh temperature combustion at 1,000-1,200°CHolding time ≥ ...


    By Hofstetter BV

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you