30 products found
Shand & Jurs (L&J Technologies & L&J Engineering) Products
-
L&J Engineering - Model MCG 1600SFI - Smart Flash Infrared Radar Gauge Conar Antenna
Dual Microprocessors: At the heart of the MCG 1600SFI is a high integration core microprocessor which can be customized to specific applications. A separate DSP microprocessor provides high speed measurement and algorithm processing for high accuracy, obstruction avoidance, self-calibration, and echo cancellation. All programmed and processed information can be displayed on the gauge’s 32-character LCD as well as an optional ground level ...
-
Biogas Digester Gas Stream Equipment
-
Shand & Jurs - Model 97125 - Biogas Condensate Accumulator
The Shand & Jurs Biogas 97125 Condensate Accumulator is designed to permit the removal and storage of liquid condensation from biogas while maintaining system pressure integrity. Condensate is a typical byproduct that forms in the pipeline when the hot, saturated biogas cools as it moves through the piping system. The removal of condensate from the biogas is necessary to keep the gas train running by protecting the downstream equipment and piping from ...
-
Shand & Jurs Biogas - Model 97180 - Foam Separator
The Shand & Jurs Biogas Model 97180 Foam Separator is designed for use in piping systems to remove foam caused by agitation from the digester discharge gas. The foam must be dispersed and collected in order to protect downstream equipment from corrosion or clogging. The Foam Separator is typically installed in the digester gas ...
-
T Series Touch Screen Control Panel
-
Shand & Jurs Biogas - Model 97300T - Waste Gas Burner with Touch Screen Control Panel
Designed for complete automatic operation of the entire Flare System, the Shand & Jurs Biogas 97300T Waste Gas Burner and Touch Screen Control Panel is specifically designed to operate efficiently with low BTU anaerobic digester waste gases. The 97300T efficiently incinerates waste gases thus minimizing odors and VOC's. The stoichiometric pilot ensures that a proper air to fuel mixture is maintained throughout the wide range of pressure and BTU ...
-
Shand & Jurs Biogas - Model 97301T - Waste Gas Burner with Touch Screen Control Panel
Designed for complete automatic operation of the entire Flare System, The Shand & Jurs Biogas 97301T Waste Gas Burner and Touch Screen Control Box are designed to combust biogases generated in fermentation processes. It efficiently incinerates low BTU gases from anaerobic digesters, lagoons, and municipal landfills, minimizing odors and VOC's. The stoichiometric pilot ensures that a proper air to fuel mixture is maintained throughout the wide range of ...
-
Shand & Jurs Biogas - Model 97310T - Enclosed Burner with Touch Screen Control Panel
Designed for complete automatic operation of the entire Burner System, the Shand & Jurs Biogas 97310T Enclosed Flare and Touch Screen Control Panel is specifically designed to operate efficiently with low BTU anaerobic digester waste gases. The Shand & Jurs Biogas 97310T Enclosed Burner removes harmful emissions from waste gas streams. Typical applications include fermentation off gas piping systems such as anaerobic digesters. This unit is ...
-
Shand & Jurs Biogas - Model 97311T - Enclosed Burner with Touch Screen Control Panel
Designed for complete automatic operation of the entire Burner System, the Shand & Jurs Biogas 97311T Enclosed Flare and Touch Screen Control Panel is specifically designed to operate efficiently with low BTU anaerobic digester waste gases. The Shand & Jurs Biogas 97311T Enclosed Flare incinerates harmful emissions from waste gas streams. Typical applications include fermentation off gas piping systems such as anaerobic digesters. This unit has no ...
-
Waste Gas Burners and Flares
-
Shand & Jurs Biogas - Model 97300M - Waste Gas Burner
The Shand & Jurs Biogas 97300M is a low cost, basic, Waste Gas Burner designed to combust biogases generated in fermentation processes. It efficiently incinerates low BTU gases from anaerobic digesters, lagoons, and municipal landfills, minimizing odors and VOC's. The stoichiometric pilot ensures that a proper air to fuel mixture is maintained throughout the wide range of pressure and BTU fluctuations. A continuous burning pilot in the flame area ...
-
Shand & Jurs Biogas - Model 97300 - Waste Gas Burner
The Shand & Jurs Biogas 97300 Waste Gas Burner is designed to combust biogases generated in fermentation processes. It efficiently incinerates low BTU gases from anaerobic digesters, lagoons, and municipal landfills, minimizing odors and VOC's. The stoichiometric pilot ensures that a proper air to fuel mixture is maintained throughout the wide range of pressure and BTU fluctuations. A continuous burning pilot in the flame area provides stable, ...
-
Shand & Jurs Biogas - Model 97301 - Waste Gas Flare
Designed for complete automatic operation of the entire Flare System, The Shand & Jurs Biogas 97301 Waste Gas Burner and Touch Screen Control Box are designed to combust biogases generated in fermentation processes. It efficiently incinerates low BTU gases from anaerobic digesters, lagoons, and municipal landfills, minimizing odors and VOC's. The stoichiometric pilot ensures that a proper air to fuel mixture is maintained throughout the wide range of ...
-
Shand & Jurs Biogas - Model 97310 - Enclosed Burner
The Shand & Jurs Biogas 97310 Enclosed Burner removes harmful emissions from waste gas streams. Typical applications include fermentation off gas piping systems such as anaerobic digesters. This unit is specifically designed to bring emissions levels to within allowable limits as dictated by customer requirements or governmental bodies such as the ...
-
Shand & Jurs Biogas - Model 97311 - Enclosed Burner
The Shand & Jurs Biogas Enclosed burner incinerates harmful emissions from waste gas streams. Typical applications include fermentation off gas piping systems such as anaerobic digesters or landfill gas. This unit has no visible flame which makes it ideal for residential ...
-
Shand & Jurs Biogas - Model 97200 - Flame Checks
The Shand & Jurs Biogas 97200 Flame Check provides an in-line barrier against flame flashback in small gas lines. They are typically installed in pilot lines supplying fuel burning devices used in flares and waste gas burners. They are also used in vent piping servicing manometer pressure taps and diaphragm ...
-
Strip Guiding
-
GPE - Model 31551 - Heavy Duty Edge Guide Sensor
The Model 31551 Heavy Duty Edge Guide Sensor is specifically designed for heavy duty strip guiding applications, where maximum versatility is required. The sensor consists of two sturdy cast steel housings which are mounted separately, providing greater installation flexibility. One housing contains the photocell and is available in two options, either photoresistive (cadmium sulfide) or photovoltaic (silicon solar cell). The other housing contains the ...
-
GPE - Model 31850 - LED Edge Guide Sensor
The Model 31850 LED Edge Guide Sensors are specifically designed for strip guiding applications where maximum versatility is required. The sensor is available in standard gap (10' maximum) or wide gap (20' maximum) housing configurations for any application. Either housing configuration is extremely durable. Both sensors consist of two separate housings that contain the light source and the detector ...
-
GPE - Model 31581 - Autowide Centerguide Sensor
The Model 31581 Autowide Centerguide Sensor is designed specifically to provide continuous scanning of the entire span of strip width variations. This eliminates operator adjustments for strip width changes. The sensor consists of two light source housings and two solar cell housings. 250 watt lamps are used as the light source and the number of lamps required is determined by the detector ...
-
Combustion Controls
-
GPE - Model 13141 - Integral Hydraulic Controller
Integral Power Supply, Pressures up to 930 psi, 5.8 to 14.1 GPM, 3 to 7.5 Horsepower, 35 Gallon Reservoir, Proportional Control, Pneumatic or Electronic Inputs, Manual or Automatic ...
-
GPE - Model 13181 - Integral Hydraulic Controller
Integral Power Supply, Pressures up to 1000 psi, 10 to 40 GPM, 10 to 25 Horsepower, 100 Gallon Reservoir, Proportional Control, Pneumatic or Electronic Inputs, Manual or Automatic ...
-
GPE - Model 13190-13590 - Proportional-Speed Floating Control
Integral Motor / Pump, Low Inertia / Torque Ratio, Same options as 13x10 Models, Simplicity of Design, High Speed ...
-
GPE - Model 13210 - Proportlonal-Plus-Reset Hydraulic Controller
The Model 13210 Proportlonal-Plus-Reset Hydraulic Controller Is designed for slow-reacting control applications that require stability. A group of controllers are supplied from a separate, but common power supply. The controller has a practical output range of approximately 235 to 45,000 pounds of force at the actuator. Model 13210 accepts pressure or differential ...
-
GPE - Model 13310 - Proportional-Speed Floating / Span Adjustment
Proportional Control, Pressure, DP, or Electronic Input, Uses Common Power Supply, Spindle Set Point Adjusters, 235 to 45,000 lbs. ...
-
GPE - Model 13410 - Proportional Plus Reset Control
Proportional Adjustable Ration Control, Pressure, DP, or Electronic Input, Uses Common Power Supply, Spindle, Slide, Bell Crank, or Geared Wheel Ration Adjusters, 235 to 45,000 lbs. of ...
-
GPE - Model 19140 - Hydraulic Power Supply
Five Gallon Reservoir, 125 to 230 PSI, Mounting for Two Controllers, External Pump for Easy Maintenance, 1/2 Horsepower Pump, Meets JIC Standards, 0.8 to 4.0 ...
-
GPE - Model 19140/13120 - Hydraulic Power Supply and Controller
Ten Gallon Reservoir Eliminates the Need for Heat Exchanger, Pressure, Filter, and Level / Temperature Switches, Meets JIC Standards, 3.7 GPM, 100 to 300 ...
-
GPE - Model 19150 - Hydraulic Power Supply
Meets JIC Standards, 5 to 15 Horsepower, 500 to 900 PSI, 60 Gallon Reservoir, 10 to 20 ...
-
GPE - Model 14110 - Straight Type Cylinder
Single End, Low By-Pass Leakage, 1 1/2' - 8' Bore, Bronze Bearings, Up to 1500 lbs, Chrome Plated Cylinder Rod, Foot, Flange, or Pivot ...
-
GPE - Model 14120 - Hydraulic Power Supply
Double end, low by-pass leakage, 1 1/2" - 8" bore, bronze bearings, up to 1500 lbs, chrome plated cylinder rod, foot, flange, or pivot ...
-
Delavan Ultrasonic Switches
-
Sonac - Model 1000 - 2-Wire Single Point Switch
The sensor is a magnetostrictive device consisting of a diaphragm, nickel tube, magnet, drive coil and pickup coil. When 40kHz energy is applied to the drive coil, it causes the diaphragm to vibrate at a frequency determined by the mechanical resonant system of the sensor. Electrical energy is transferred to the pickup coil when the diaphragm is free to move in gas. When the diaphragm motion is loaded by a process liquid, less energy is transferred to the ...
-
Sonac - Model 1100 - 2-Wire Single Point Switch
The sensor is a magnetostrictive device consisting of a diaphragm, nickel tube, magnet, drive coil and pickup coil. When 40kHz energy is applied to the drive coil, it causes the diaphragm to vibrate at a frequency determined by the mechanical resonant system of the sensor. Electrical energy is transferred to the pickup coil when the diaphragm is free to move in gas. When the diaphragm motion is loaded by a process liquid, less energy is transferred to the ...
-
Omnitrol Chamber Mounted Level Switches
-
Omnitrol - Model 250 - Boiler Control Unit
The Omnitrol Liquid Level Control Model 250 is a chamber mounted unit designed for a variety of uses in boiler water level control applications. It utilizes a unique patented constantly engaged magnetic field concept which assures a positive switch in both the rise and fall of liquid levels without the introduction of springs or other mechanical devices. Unlike other Omnitrol units, the Model 250 utilizes a stainless steel internal float assembly rather ...