converting-variable-frequency Downloads
42 downloads found
1LH Series drives have a unique active switching in put module that does not produce high levels of harmonic distrotion. These drives are IEEE 519 compliant with no additional harmonic filter required. Other benefits include no over-sizing when the drive is installed on open delta service, and electronic power factor correction allows a larger load on a smaller utility ...
New design offers easy access, a large graphic display, and a more compact package. Active Front End (AFE) Technology provides low input harmonics and true power factor correction. Introducing the APNext Series of VFDs with guaranteed IEEE 519 compliance, robust features for incredible reliability, and protection to keep you ...
IEEE 519 is an industry standard that sets allowable limits of harmonic voltage and current on utility systems. As the use of variable frequency drives (CFD) has increased, the negative impact of the harmonics they generate has resulte din more electric utilties enforcing compliance with IEEE 519. ...
Claw compressor. with frequency converter. Low maintenance, integrated air cooling. without additional cooling medium. AC motor with integrated frequency. Converter makes possible infinitely variable. Control of the speed. ...
Frequency converters, single phase output from 500 VA to 15 kVA or 3-phase output from 1,5 kVA to 45 ...
Fluid Freeze has possibility to have all fans equipped with VLT frequency converters, enabling and providing continual change of fan speed, in range of 0-150% of nominal sped (at 50 Hz), which ensures maximum of flexibility in adjustment of fan speed and working conditions in freezer. This provides maximum of flexibility in adjustment to any specific technology and product, giving possibility to ...
AQUA Premium Booster Sets offer Premium control panel with Premium Controller. This controller, developped specially for hydraulic applications, allows to monitor, visualize and access to work graphics and lists, offering on this way, a rigorous and efficient management of the system. The Premium controller has the responsability for system control and protection. Integrating a monochromatic ...
ByEFAFLU
The history of the company is closely associated to electric technology. The range of our electrothermal equipment is quite wide and covers induction heating, arc and electroslag melting. Tallinn Electrical Engineering Factory ESTEL has been developing the technology of induction heating devices since 1968 when the factory released TFC series thyristor frequency converter. The close cooperation ...
The Majortel 1U Converter System is a sleek, compact design that is ideal for applications requiring 48V dc power from a 130V dc power source. Each system is designed to occupy a true 1U (1.75” tall) rack space in a standard 19” wide rack and under 11”deep. Typical installations include two compact, high density and reliable high frequency 25 amp converters, for a total system ...
We offer high quality custom made production, designed and manufactured in our premises. The very first converters for aircraft ground maintenance ESTEL has developed and released yet in 1974. Since then the Company's products for aviation include frequency converters, aircraft rectifiers, combined power supplies and other equipment which for many years successfully working with all types of ...
The microprocessor controlled AC/AC Frequency Converters »EPS/FTP/T« of EPS Electronic Power Supplies provide a 3-phase sine wave output from a 1- or 3 phase input. There are output power of 1500 VA to 6000 VA available. The 50, 60 or 400 Hz output frequency and output voltage 200/115V and 400/230V AC are factory-set. The floating outputs are isolated from each other and can be ...
The transducer SINEAX F535 (Fig. 1) converts the frequency difference of two synchronised supplies into a load independent DC current or a load independent DC voltage proportional to the measured ...
EFC3610 is a universal, low-cost frequency converter for reliable speed control and demand-oriented energy supply. V/f control, easy installation and commissioning as well as an increased power range enable a wide range of ...
The Intepro AMF Series is a complete line of single and three phase, 400Hz AC Frequency Converter products. With Power levels ranging from 6kVA up to 300kVA, the AMF series of frequency converter products are the ideal and cost effective solutions for precise frequency conversion in all avionics and higher frequency electronic applications. Power and frequency conversion is supplied by ...
DTI's universal high frequency power converter architecture can be used for a wide range of applications requiring AC-to-DC and DC-to-DC power conversion. The higher control bandwidth provided by high frequency switching allows the output power to be highly regulated into nonlinear and transient ...
Product testing requires not only the conventional data acquisition of analog signals such as temperatures, pressures and flows, but also often the synchronized acquisition of power of data. This power data normally needs to be acquired in the form of AC values from the primary-side supply. Other relevant values include actual, apparent and idle power as well as cos phi, crest factor and TRMS for ...
Three phase sine wave voltage output filters especially designed for frequency converters. Remove pulses generated by the output voltage of the frequency converters PWM (pulse width modulation) at high frequencies and restore sinusoidal waveform at power converter´s output. ...
The F2A1X Frequency to Analog module converts a frequency input signal into a proportional analog voltage (0-5 V dc) or current (4-20 mA) output. The output signal is electrically isolated from the input signal and input power source, effectively eliminating troublesome ground loops. The input signal can be supplied from a Monarch sensor (measuring RPM for example) or any source of digital signal ...
The microprocessor controlled converters »EPS/CO« of EPS Electronic Power Supplies cover double conversion technology and provide a pure sine wave output. ...
Shore to ship power supply is used to change of main power’s frequency value, to supply 440volt, 460Volt, 480Volt, 575Volt, 600Volt or 690Volt 60Hz or 50Hz energy to supply energy to the systems and vessels at the harbors. That’s why, power supply production sector has to find a solution for this kind problem. It can be said that frequency converters are the machines to pretend these ...