wind turbine structure Downloads

  • Sesam - Offshore Wind Turbine Structures Analysis Software Brochure

    Sesam provides a tailor-made solution for structural strength analysis of fixed offshore wind turbine structures. It can be used for conceptual and detailed design of the primary structure, as well as for design of secondary steel such as boat landings and J-tubes. Besides this, Sesam can perform other lifecycle analysis such as transportation and ...


    By DNV GL - Software

  • Model V136-3.45 MW - Wind Turbines Brochure

    V136-3.45 MW combines Vestas' most advanced aerofoil design to date with the proven 4 MW nacelle and Large Diameter Steel Tower (LDST) technology, to deliver high and efficient energy production in low- and medium-wind conditions. The aerofoil design, applied to the 66.7m long blades, enables a 16 percent* increase in annual energy production while at the same time minimising structural loads. ...


    By Vestas Wind Systems A/S

  • Model V126-3.45 MW - Medium Wind Turbines Brochure

    Built on the same proven technology as the V112-3.0 MW®, the V126-3.45 MW® IEC IIA/IEC IIB operates on medium-wind sites. Equipped with the industry known structural shell blades, the blades of the V126-3.45 MW® turbine do not weigh more than those of the V112-3.0 MW®. The 126 m rotor enables greater wind capture, which in turn produces more energy at a reduced cost. The result is ...


    By Vestas Wind Systems A/S

  • KENERSYS - Wind Turbine - Brochure

    KENERSYS is a specialist for onshore multi-megawatt turbines especially developed for low and medium wind speed sites, a market segment that will drive the future growth in the relevant wind markets all over the world. The KENERSYS Headquarters and GLOBAL TECHNOLOGY CENTER are based in Muenster (Germany). KENERSYS has two full-scale production facilities in Wismar (Germany) and Baramati (India) ...


    By KENERSYS GmbH

  • Small Wind Turbine Tower Brochure

    Lattice and tubular towers of up to 30 meters height are available for ANTARIS small wind turbines.. All the masts have approved structural calculations and are delivered with foundation plans. In addition, the lattice masts provide the possibility of having a surface for advertising ...


    By BRAUN Windturbinen GmbH

  • Model AW75 - Wind Turbines Brochure

    The Company’s first field-proven series (the AW75 turbine) is in operation with pilot customers in Kuwait and the Netherlands. The AW75 turbine can produce up to 7,500 liters of clean water per day. The unique proposition of Dutch Rainmaker is that our products require little to no existing infrastructure, which makes them especially suited for remote locations. ...


    By Dutch Rainmaker BV

  • Remote Monitoring Of Wind Turbines Brochure

    3We deliver lead-time to maintenanceRemote Condition Monitoring Program for Wind TurbinesA pro-active wind turbine condition monitoring strategy offers clear ad-vantages to your operation & mainte-nance program. It allows you to make service interventions in order to avert catastrophic failure, perform inspec-tions that are prioritized and properly focused, and optimize maintenance scheduling and ...


    By Brüel & Kjær Vibro GmbH

  • Wind Turbines 6.2M Series Brochure

    Certification: IEC S (based on IEC IB); up to WZ 4. Nominal power:6,150 kW.Rotor diameter:126 m. Hub height (m):Onshore: 100 / 112-114 / 117, Offshore: 95 / 96,5 (site specific). Rotor speed:,9 - 12,1 min-1 (+15%). Power control: Electrical pitch system – pitch and speed ...


    By REpower UK Ltd.

  • 3.2-103 Wind Turbine Brochure

    Introducing GE’s 3.2-103…a powerful turbineGE Power & WaterRenewable EnergyGE’s 3.2-103…A Powerful TurbineGE’s 3.2-103 brilliant wind turbine generates an impressive amount of energy for medium-to-high wind speed sites. Building on the exceptional performance of the 2.5 MW fleet, GE’s 3.2-103 wind turbine provides a 5% increase in energy output, with the same reliable performance as the ...


    By General Electric

  • Model WTN 500 - 500KW Wind Turbine - Brochure

    The wind turbine WTN 500 is a pitch-controlled turbine with complete variable speed for operation parallel to the public grid. The rated output of the plant is 500 kilowatt; the rotor diameter is 48 meters. The rotor has three blades and is arranged in upwind position of the tower. Yawing into the wind is achieved by two electrically driven yaw systems. You can choose between a 50m tubular and a ...


    By Wind Technik Nord GmbH

  • Senvion - Model MM-Series - Wind Turbine Brochure

    The standard in the 2 MW class. The Senvion MM series.The proven economic efficiency and reliability make our esta-blished MM series the bestseller in the Senvion portfolio. With more than 3,500 installed and operating wind turbines it is thestandard in the 2MW class. The MM series is characterised by its versatility: Three turbine types with different rotor sizes and varying hub heights allow ...


    By Senvion S.A.

  • Libellula - Model 60i - Wind Turbine Datasheet

    LIBELLULA wind turbines are 100% made in Italy. They are produced with high quality components and the best engineering standards. Designed to achieve minimum cost per kWh of produced energy, LIBELLULA wind turbines grant the same reliability of big size wind turbines. They are conceived as large, high-power industrial installations: equipped with aactive yaw system with gear motor, professional ...


    By Aria s.r.l

  • Model Air X - Marine Wind Turbine Brochure

    OWNER’S MANUALInstallation s Operation s MaintenanceAll Rights ReservedAir XPrimus Wind Power938 Quail StreetLakewood, CO 80215303-242-5820Primus Wind Power, Inc.Congratulations on your purchase and welcome to our familyDear AIR Owner,Thank you for your purchase of an AIR wind turbine. You have purchased the most advanced battery charging wind turbine in the world We believe you will find it ...


    By Primus Wind Power

  • Model ST10 - Wind Turbine System Brochure

    The ST10 turbine has a large diameter permanent magnet ring style generator, directly driven by the turbine rotor.  Each of the three pitching blades is mounted to an “A-frame” blade support structure that straddles the generator.  The support structure legs terminate on two independent hubs which also function as the hubs for the generator rotor.  The outer rim of the ...


    By Sway Turbine A/S

  • Mervento - Model 3.6-118 - Wind Turbine Brochure

    The first member of the Mervento wind turbine family is the horizontal-axis, beautifully designed, direct drive MERVENTO 3.6-118. This wind turbine is developed for superior energy production at sites near the shore. The MERVENTO 3.6-118 has a rated power of 3.6 MW and a rotor diameter of 118 metres.   The MERVENTO 3.6-118 is being type certified in accordance with IEC 61400-1, ...


    By Mervento Ltd

  • Zebra - Vertical Axis Wind Turbine Datasheet

    WIND TURBINE ASSEMBLY COMPONENTS Vertical axis wind turbine (VAWT) Kliux Zebra. Gear box. Three-phase Permanent Magnet Generator. Steel mast with anti-corrosion painting protection. Wind inverter Etesian Mini 2600, 2kW, 230 Vac, 50 Hz (Santerno). GSM/Ethernet Communications module (optional). Weather station (optional). Voltage dischargers. SOLAR PHOTOVOLTAIC ASSEMBLY 15 Photovoltaic panels ...

  • Wind Tulip - Small Vertical Axis Wind Turbine (VAWT) Brochure

    The Wind Tulip - your choice of wind turbine – cost-effective, silent, vibration-free, beautiful, and long-lasting, the wind turbine to produce green energy and live next to with pride for many years to come. The Wind Tulip is designed for producing clean energy at low starting speeds from any direction while allowing people to enjoy living next to ...


    By Leviathan Energy LLC.

  • Model Air 40 - Wind Turbine - Brochure

    PRIMUS WIND POWER DOCUMENT #0070 REV C PRIMUS WIND POWER Page 1 of 26 2/4/0545-FOOT LAND TOWER KIT For AIRTM WIND MODULES Made in the USA by: Primus Wind Power 938 Quail Street Lakewood, CO 80215 USA (303) 242-5820AIR is a trademark of Primus Wind Power Inc. PRIMUS WIND POWER DOCUMENT #0070 REV C PRIMUS WIND POWER Page 2 of 26 2/4/0545-Foot LAND TOWER KIT CONGRATULATIONS You have just ...


    By Primus Wind Power

  • Model Air 30 - Wind Turbine Brochure

    When you need energy, our AIR 30 delivers. It's hands down the best energy choice for off-grid land-based applications in high wind environments. Use it for SCADA, telecom, security, cathodic protection -- you name it. With optimized software, AIR 30 consistently delivers energy where it matters. The AIR 30’s heavy-duty design can withstand most high wind environments. The AIR 30 is an ...


    By Primus Wind Power

  • Eno - Model 114 | 3,5 MW - Wind Turbine Brochure

    The maximum yield of wind farm is ensured by theeno 114, even at sites featuring higher ambient turbulence. 3,500 kWrated power output enables the turbine to be the most powerfulonshore turbine within the 3 MW class. With a perfect balance betweenrobust, conservative machine design and high level innovativedetails, the eno 114 reaches an unsurpassed wind park packing densityand maximum yields for ...


    By e.n.o. energy GmbH

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you