Only show results in Virginia? Ok

Fuel Cells equipment for Energy Storage

  • Premium

    MCZ - Inspection Station and Test Bench for Fuel Cells

    Automatic test bench to check fuel cells with automatic recording of characteristic U/I line, characteristic gas stoichiometry line, dynamic load behavior, characteristic line with different cell temperatures, gas dampening states, and operating pressures.

    By Umwelttechnik MCZ GmbH based in Bad Nauheim, GERMANY. from Specialized Systems Product line

  • Premium

    THERMOX - Model PreMix 2000 - Analyzer

    The THERMOX PreMix 2000 analyzer accurately and continuously measures the proportions of oxygen and fuel in pre-mix gases, operating in either excess fuel or excess air conditions.  The analyzer is fed a small sample of the air/fuel mixture burning it and them measuring the next oxygen or next excess fuel content of the mixture.

    By Ametek Process Instruments - THERMOX based in Pittsburgh, PENNSYLVANIA (USA). from THERMOX Product line

  • Model FC-6030 / FC-8040 - Cathode Air Blower

    FC-8040 is designed for 24VDC systems using PWM controller. Pumps equipped with thermal overload protection.

    By HiBlow USA based in Saline, MICHIGAN (USA). from FC Series for PEM CHP Fuel Cells Product line

  • Electrical Contact Elements

    Due to their excellent geometric and thermal properties, knitted wire mesh elements in fuel cells are used for both stationary and mobile applications. They take up the position of a contact and compensation element.

    By RHODIUS GmbH based in Weißenburg / Bayern, GERMANY. from Constructional Elements Product line

  • Model AC64 - Lightweight Fuel Cell Stack

    The new AC64 lightweight fuel cell stack provides power in 780W or 1800W formats. Built on the proven cell configuration of the standard stack, but with substitution by lighter materials, the lightweight stacks are reduced in mass by more than 60%.

    By Alliance Refuse Trucks based in Gilbert, ARIZONA (USA). from Drones Products Product line

  • Stainless Ateels Alloys

    Special stainless steels represent a material group that is situated between the non-corrosive steels and the nickel alloys. These iron-nickel-chromium alloys differ from the ordinary non-corrosive steels by their higher alloying additions of nickel, chromium or molybdenum. Many corrosion-resistant alloys, such as VDM® Alloy 31, VDM® Alloy ...

    By VDM Metals International GmbH based in Werdohl, GERMANY. from Other Alloys Product line

  • Glass and Glass-Ceramic Sealants for Solid Oxide Fuel Cells

    Solid Oxide Fuel Cells (SOFC) are considered among the most promising methods for the efficient and environmentally-friendly production of energy. They convert chemical energy, generated from a combination of fuel (e.g. H2, natural gas) and oxidant (e.g. air) gases across an oxygen ion conducting ceramic, into electrical energy and heat. Due to ...

    By Schott AG based in Duryea, PENNSYLVANIA (USA).

  • BIO-H2-GEN - Hydrogen from Wastwater

    If a community of 300,000 acquired our facilities and our novel chemical process it could be producing the following amount of “zero-carbon” hydrogen for fuel cell use or for grid electricity.

    By BIO-H2-GEN Inc. Research & Development based in ONTARIO (CANADA).

  • Centeral Heating Boilers

    Itimat GMN Series hot water boiler's efficiency varied for usage of gas or liquid fuel, boiler water heat 93%

    By İtimat Boiler Industry Company based in Başakşehir, TURKEY.

  • Fuel Cell Types and Hydrogen

    Not all fuel cells require hydrogen. The proton exchange membrane fuels cells (PEMFC) require hydrogen gas. They will power our automobiles. The automobile manufacturers await availability of hydrogen gas. They expect “zero-carbon” h2 to become available starting 2015.

    By BIO-H2-GEN Inc. Research & Development based in ONTARIO (CANADA).

  • Platinum on Vulcan - Model 40% - PtC 40%

    The ability to prepare well dispersed, high surface area electrocatalysts containing platinum has significantly increased the viability of many electrochemical processes. This new process provides an outstanding, high purity catalyst that is amenable to forming highly uniform electrode structures. Suggested Uses Platinum on Vulcan (Carbon) is most ...

    By Fuel Cells Etc based in College Station, TEXAS (USA). from Catalyst Product line

  • Platinum on Vulcan - Model 60% - PtC 60%

    The ability to prepare well dispersed, high surface area electrocatalysts containing platinum has significantly increased the viability of many electrochemical processes. This new process provides an outstanding, high purity catalyst that is amenable to forming highly uniform electrode structures. Suggested Uses Platinum on Vulcan (Carbon) is most ...

    By Fuel Cells Etc based in College Station, TEXAS (USA). from Catalyst Product line

  • Platinum on Vulcan - Model 20% - PtC 20%

    The ability to prepare well dispersed, high surface area electrocatalysts containing platinum has significantly increased the viability of many electrochemical processes. This new process provides an outstanding, high purity catalyst that is amenable to forming highly uniform electrode structures. Suggested Uses Platinum on Vulcan (Carbon) is most ...

    By Fuel Cells Etc based in College Station, TEXAS (USA). from Catalyst Product line

  • Platinum Black - Model PtB - Catalyst

    The ability to prepare well dispersed, high surface area electrocatalysts containing platinum has significantly increased the viability of many electrochemical processes. This new process provides an outstanding, high purity catalyst that is amenable to forming highly uniform electrode structures. Suggested Uses Platinum Black is most commonly ...

    By Fuel Cells Etc based in College Station, TEXAS (USA). from Catalyst Product line

  • Fuel Cell System Oxidizer

    The rapidly advancing fuel cell industry is persistently striving to become safer, less costly, and more efficient each day. PCI is supporting that mission with our unique burner technology. We are helping to pioneer fuel cell development by adapting our innovative burners to effectively complement emerging advances in the field.

    By Precision Combustion, Inc. (PCI) based in North Haven, CONNECTICUT (USA). from Burners/Oxidizers Product line

  • PCI - Water Gas Shift and PROX Fuel Processor Catalytic Reactors

    PCI is developing water gas shift and selective CO oxidation (aka PROX) catalytic reactors for integration into fuel processing and fuel cell power generation systems. PCI's Water Gas Shift and PROX technologies developed under NSF, Navy and internal programs have demonstrated highly selective conversion of CO in an extremely small package. The ...

    By Precision Combustion, Inc. (PCI) based in North Haven, CONNECTICUT (USA). from Fuel Processor Product line

  • Piccolo - Model Plus - GPS Telematics Device

    Piccolo Plus - The most innovative, most complete GPS telematics device for: Built in WiFi Hotspot. Wireless RFTags for Vehicle IoT. FMCSA certified ELD for hours of service.

    By Wireless Links Inc. based in Lyndhurst, NEW JERSEY (USA).

  • Model 20 Watt PEM - Fuel Cell

    Recommended for use in small projects, the versatile H-20 PEM Fuel Cell is an air powered, air cooled and self-humidifying fuel cell. The H-20's air cooling feature renders bulky and inconvenient water cooling systems obsolete, allowing for a semi-integrated, efficient and reliable system. The H-Series PEM fuel cells are ...

    By Fuel Cells Etc based in College Station, TEXAS (USA). from Fuel Cells Product line

  • HexiFormer - Plate Heat Exchange Fuel Processors

    The HexiFormer fuel processor is based on a plate heat exchange design. It is offered as an individual unit for SREF, WGS and PROX reactions.The HexiFormer units are operated with a very accurate temperature control, and can be used for temperatures up to 950° C.

    By Catator AB based in Lund, SWEDEN. from Fuel Processor & Fuel Cell Systems Product line

  • MultiFormer - Dual Fuel Processor

    The MultiFormer fuel processor is preferably used with SOFC stacks. The unit can be operated in both Catalytic Partial Oxidation (CPO) mode and Autothermal Reformer (ATR) mode. The Multiformer units have mainly been used for reformation of jetfuel , like JP8, or other similar fuels that contains high concentration of Sulphur.

    By Catator AB based in Lund, SWEDEN. from Fuel Processor & Fuel Cell Systems Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you