Only show results in Connecticut? Ok

Hydropower Operations equipment for Hydro Energy

  • ABB - Model HVR-63XS / HVR-63S - Generator Circuit Breaker

    The latest generation of ABB’s generator circuit-breaker (GCB) With the new HVR-63 GCB, ABB continues to lead the way in designing the most advanced GCBs. The HVR-63 is the latest generation ABB GCB and it is best suited for retrofits or replacement in power plants with unit power of up to 180 MW. The open design and small footprint makes it ...

    By ABB based in Zurich, SWITZERLAND. from Generator Circuit Breakers (GCB) Product line

  • Etaeval - Hydropower Plant Transient Simulations

    Transient operation is inherent to the operation of hydroelectric power plants and water supply systems, since machines are started, stopped or work at time varying operating conditions. Water hammer and/or mass oscillations may occur. The associated pressure fluctuations can be simulated, worst-case scenarios can be predicted and optimizations ...

    By Etaeval GmbH based in Horw, SWITZERLAND. from Simulations Product line

  • Dive Bearing / Sealing

    The only turning component is the direct connected unit of generator and turbine runner. This component is supported by a central bearing unit. The DIVE-Bearing ensures high working loads and maximum system rigidity. This assures a long durability and a maintenance free operation of the hydro power plant.

    By DIVE Turbinen GmbH & Co. KG based in Amorbach, GERMANY.

  • CRUSHKING - Portable / Tires – Impact

    4034 Impact Crusher.  Approx. 33”H X 35”W FEED OPENING. Two or Four row design available. Hydraulics on crusher lid for ease of accessing internal components. 38” X 12’ Vibrating Grizzly Feeder: Complete with V-Belt drives, 20HP  TEFC electric motor (220/440 Volts, 3 phase, 60 cycle.) and adjustable motor ...

    By R.R. Equipment Company based in Lancaster, SOUTH CAROLINA (USA). from Portable / Tires Product line

  • Mersen - Carbon Brushes for Generators & Alternators

    Mersen offers a wide range of carbon brushes for generators and alternators. For turbogenerators, our LFC brush grades are internationally renowned, especially LFC 554 grades. For wind mills, CG626 grades are known throughout the world. These soft graphite grades are prepared from graphite powders (natural purified or artificial) agglomerated with ...

    By Mersen based in Paris La Défense, FRANCE. from Electrical Solutions For Motors And Generators Product line

  • Hydroelectric

    The company's activity in the field of hydroelectric power stations covers both turnkey projects and operation and maintenance contracts. Elecnor has been involved in the development and construction of numerous power station projects, and has in place all the skills required to cover every phase involved. Over recent years, and particularly on ...

    By ELECNOR based in Madrid, SPAIN.

  • Francis Hydro Turbines

    Francis turbines generally are the most efficient solution for heads ranging from 40 to 600 meters.The runner design can be adapted to get the highest level of efficiency in its whole range of application.Francis turbines are very robust and able to sustain the high mechanical stress resulting from high heads.Alstom has successfully completed ...

    By Alstom based in Saint-Ouen, FRANCE. from Hydro Turbines Product line

  • MCELROY LineTamer

    With the McElroy LineTamer, you can install coiled PE pipe, conduit, and duct faster than installations with straight, cut lengths of pipe. You can install an entire coil of pipe with a minimum of two fusion joints. The LineTamer cost effectively straightens and re-rounds coiled pipe to meet or exceed ASTM D2513 ovality requirements. It removes ...

    By McElroy Manufacturing based in Tulsa, OKLAHOMA (USA).

  • Versa Grip Drum Handler Lifts, Stacks and Dumps Steel Drums

    Powerful fork-mounted drum handler securely grips drums or cylinders from 18'' to 28'' diameter. Hydraulic power allows operator to grab, lift, transport and dump containers over rough surfaces or even outdoors. Rubber-lined jaws won´t mar drums. Drive-in fork tube, safety chain secures drum grabber to the forklift. Self-Powered Handler can be ...

    By BASCO, Inc based in University Park, ILLINOIS (USA).

  • Challenger - Hydraulic Power Units

    Hydraulic power units are individually designed to meet your requirements upto 45kW capacity. Electric Motor, Diesel Engine or Petrol Engine driven hydraulic power packs can be supplied complete with electrical control panels. Specially protected and zoned electric motors and panels can be supplied for hydraulic power units and equipment to be ...

    By Challenger Group based in Hull, UNITED KINGDOM. from Hydraulics Product line

  • Schwing Bioset - Hydraulic Power Packs

    Schwing Bioset's piston pumps are operated via a hydraulic power pack and controlled by variable displacement hydraulic pumps. No VFD's are required for Schwing Bioset pumping systems as the pump speed is controlled by the variable displacement of the hydraulic pump. In fact, the pumps are even switched hydraulically which has proven over the ...

    By Schwing Bioset, Inc. based in Somerset, WISCONSIN (USA). from Industrial Pumps Product line

  • Stop Logs

    Kuenz developed stop log solutions, which are optimal applicable at the particular sites. Stop logs are designed in a sliding or fixed wheel construction.

    By Kuenz GmbH based in Hard, AUSTRIA. from Hydropower Product line

  • Rhino - Model HPP 13 - Hydraulic Power Packs (HPP)

    Part No.: 801213. Standard Equipment: Hand Start, Adjustable Flow, Direct Pump Driven Air-Fan Oil Cooler, Engine Oil Level Switch, Oil-filter with Bypass Protection, Quick Connect Couplings. Weight, lb: 178. Dimensions,  LxWxH  in: 28 x 23.4 x 26.4. Oil flow, gpm: Adjustable Control Lever,  5-8. Max. pressure, psi: 2200. Nominal ...

    By Rhino Tool Company based in Kewanee, ILLINOIS (USA). from Hydraulic Power Packs (HPP) Product line

  • Control & Protection System

    Control & protection system of hydropower plants is mainly responsible for monitoring, control and protection the operation conditions for all equipments in power plant, also known as secondary electrical equipment of hydropower plants, it is a central system of plants operation management; Through each kinds of sensor and detecting ...

  • Ball and Spherical Valves

    Mainly used in hydroelectric power plants when high values of flow rate speed and/or pressure rating are required. The main feature of the valves we produce is the actuation of the two movable seal rings, one on upstream and one on downstream side of the valves. They ensure the perfect tightness of the valve and in the same time the upstream one ...

    By F.Nencini Srl based in Colle di Val d’Elsa (SI), ITALY.

  • Bardella - Hydropower Plant

    At the end of the 1940s Bardella had already started the manufacture of the first hydromechanical equipment for the energy sector, including dams and river locks within the country. Since then it has established and consolidated its privileged position as a supplier of this type of equipment. Investments in research and technological development ...

    By Bardella SA Indústrias Mecânicas based in Guarulhos - SP, BRAZIL.

  • Bid-Well - Model 6500 - Airport Pavers

    Paves streets, highways, airports and other slabs. Paves a variety of surfaces—matches flat, parabolic, crowned, super-elevated and tapered surfaces. Paving carriage strikes off, paves and textures the concrete with augers, paving rollers, drag pan and texturing. Automatic machine operation. Automatic internal concrete vibration system. ...

    By Terex based in Oklahoma City, OKLAHOMA (USA). from Airport Pavers Product line

  • Hydropower Screw Turbine

    Since ancient times, the hydropower screw has been known as an 'Archimedean screw'. The key factor with it, is that the reversal of its function provides an efficient means of saving energy. With collaboration with REHAR GMBH and Jash India, Electhrone Technology is proud to bring this product into Malaysia.REHART hydropower plants are ...

    By Electhrone Technology Sdn Bhd based in Kuala Lumpur, MALAYSIA.

  • CRUCIAL - Hydraulic Power Packs

    Hydraulic Power Packs – Rugged, portable, wheel or skid mounted diesel/hydraulic power packs designed to provide hydraulic flow for operating a variety of equipment. Units are comprised of single, dual or multiple flow controls to allow the power packs to power a single piece of equipment (i.e., boom reel) and, if required, two (or more) ...

    By Crucial, Inc based in Gretna, LOUISIANA (USA). from Oil Spill Equipment Product line

  • FAB - Hydropower Turbines

    Hydropower equipment technology has become the forefront of the energy conversion industry. Hydraulic turbine and shaft machining has taken on the role of energy conduction for many modern homes and business buildings. Canadian manufacturers have made modifying and maintaining these priceless machines a top professional priority. Hydropower ...

    By FAB 3R Inc. based in Trois-Rivières, QUEBEC (CANADA). from Hydropower Equipment Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you