Only show results in Texas? Ok

Hydropower Plants equipment for Hydro Energy

  • Premium

    Protection of Hydropower Equipments

    Variable frequency drives (VFDs) at hydroelectric power plants often control critical systems such as irrigation, water levels, fish management devices or flood gate control systems. In many cases the VFDs may already be equipped with manufacturer-installed line side surge protective devices (SPDs) to protect against spikes generated by switching ...

    By Raycap based in Maroussi Athens, GREECE. from Energy/Utilities - Renewable Energy Product line

  • Premium

    Landustrie Landy - Hydropower Screw Turbines

    The new range of the Landustrie screw pump covers the hydropower screw turbines. An efficient use of water power is already achieved at a level difference of 1 meter and a capacity of 500 l/sec. The largest capacity and level difference for hydropower screws is as much as 15000 l/sec. at 10 meter.

    By Landustrie Sneek BV based in Sneek, NETHERLANDS. from Hydropower Product line

  • Ideal - Permanent Magnet Motor/Generators

    The first IDEAL ELECTRIC branded, multi-megawatt permanent magnet synchronous generator was introduced in 2018. The air-cooled machine sets new benchmarks for power density and weight saving in mobile gas turbine power unit applications for electric hydraulic fracturing.

    By Ideal Electric Company based in Mansfield, OHIO (USA).

  • Hydropower Gantry Crane

    Hydropower Gantry Crane mounted on the hydropower station crest, used in various large scale water supply and drainage, water conservancy and hydropower engineering and other places. Mainly used for lifting the hydropower station gate to reach the purpose of its open and close, maintenance and repair equipment, cleaning up rivers, etc.Hydropower ...

    By Weihua Crane Machinery Co., Ltd. based in xinxiang, CHINA.

  • Double Flanged Sleeve Valves

    They allow a very high upstream pressure loss, without any risk of critical phenomena (cavitation, vibration, noise) even with little downstream head pressure. They are also used as synchronous discharge tool for turbine plants (mainly Pelton or Francis turbines) because they are able to work in high pressure condition. The discharge is carried ...

    By F.Nencini Srl based in Colle di Val d’Elsa (SI), ITALY.

  • Konrad - Model 60 - Woody Harvester

    Max. felling diameter : 65. Max. delimbing diameter : 8-60 cm. Max. opening distance of the grapple : 125 cm. Delimb feed strength : 30 - 37 kN . Recommended engine power : 0 - 5 m/sec. empf. Antriebsleistung : 140 HP. Hydraulic system : 300-350bar;220l/min. Bar saw feed rate : 40 m/sec. Rotator : integrated rotator (endless). Machine control ...

    By Konrad Forsttechnik GmbH based in Preitenegg, AUSTRIA.

  • Honda - Model 200 & 200E - Hydro Power Plants

    Hydro power plant Honda 200: Engine: GX200. Dimensions: 65x40x40. Displacement: 200 cm³. power: 6,5hj. Weight: 40kg. Pump 3500rpm: 9 L/min   175bar.

    By Kreisi Metall OÜ based in Lääne-Virumaa, ESTONIA.

  • Simonsen - Model V50 - Feed Bodies

    For your special feed delivery needs, specify the Simonsen VA50 Series. No other feed body lends itself to as many custom modifications and applications. With fifteen body and model sizes available, you're sure to find the payload capacity you want within your length and height limitations. But size isn't the only option available on Simonsen's ...

    By Simonsen Industries Inc based in Quimby, IOWA (USA). from Feed Bodies Product line

  • KOLLER - Model PTO Swap Body 24ft - Wireline Truck

    The KOLLER Wireline Truck has been developed for carrying out measurements and workover activities with wire capacities above 7,650 m  /  25,000 ft. Flexibility, high speed and high pull force at any depth characterize our Wireline Winches. Our designs are developed by close association with our customers.The unit can be placed on trucks ...

    By KOLLER Maschinen- und Anlagenbau GmbH based in Celle, GERMANY. from Well Servicing Products Product line

  • BSP - Model DX - Hydraulic Hammer

    The DX Range of Hydraulic Piling hammers are designed for small bearing piles of steel, timber, concrete and many sheet piles. The DX hammer is available with back guides for operating from a piling mast or a slider when operating from an excavator.

    By BSP International Foundations Limited based in Suffolk, UNITED KINGDOM. from Piling Hammers Product line

  • UnderCover - In-Out Sheeting System

    Our Innovative In-Out Sheeting System - Type Approved For Hookloaders & Draw Bar Trailers. Designed to be worldwide compliant Transcover’s UnderCover for hook loaders is our fully automatic sheeting system that sits within 2.55m width when both covered and uncovered.  Ideal for covering all sizes of container from ground level.

    By Transcover based in Aylesford, UNITED KINGDOM. from Hook Loader Product line

  • Model KGS-245 - Shearers Loader

    KGS-245N is a shallow web, double-arm shearer loader, interoperating with a face conveyor and a powered roof support. The machine is equipped with a chainless haulage system located from the gob side. KGS-25N is used for bidirectional niche-free coal mining and loading in a longwall system, with the seam height of up to ...

    By Famur S.A. based in Katowice, POLAND. from Longwall Systems- Shearers with Hydraulic Haulage Product line

  • Griffin - Model GT6010 - Dump Trailer

    Width : 60″. Lengths: : 8′ & 10′. GVRW (Lbs) : 7000.  GAWR (Lbs/Axle) : 7000. Curb Weight : 1895. Payload : 5105. Dump Capacity : 3000. Tongue Weight : 280. Overall Length : 170″. Bed Length (inside) : 119.5″.  Bed Width (inside) : 59.5″. Bed Height (inside) : 18″. Floor Height : 29. Coupler ...

    By Griffin Trailers based in Elkhart, INDIANA (USA). from Dump Trailers Product line

  • Griffin - Model GT8312 - Dump Trailer

    Width : 83″. Lengths: : 12′. GVRW (Lbs) : 12000. GAWR (Lbs/Axle) : 6000. Curb Weight : 3620. Payload : 8380. Dump Capacity : 8000. Tongue Weight : 580. Overall Length : 198″. Bed Length (inside) : 144″. Bed Width (inside) : 83″. Bed Height (inside) : 24″. Floor Height : 29″. Coupler height : 18″.

    By Griffin Trailers based in Elkhart, INDIANA (USA). from Dump Trailers Product line

  • Griffin - Model GT7210 - Dump Trailer

    Width: 72″. Lengths: 10′ & 12′. GVRW (Lbs): 9900. GAWR (Lbs/Axle): 5200. Curb Weight: 2720. Payload: 7270. Dump Capacity: 6000. Tongue Weight: 420. Overall Length: 174″. Bed Length (inside): 120″. Bed Width (inside): 72″. Bed Height (inside): 20″. Floor Height: 29. Coupler height: 18.

    By Griffin Trailers based in Elkhart, INDIANA (USA). from Dump Trailers Product line

  • JLA - Control and Automation Systems

    The “Automation & Control” department at JLA & Co is able to support you with the automation of your hydroelectric power plant, including: Electronic speed control with remote-control turbine gates.

    By JLA & Co Sprl based in Marchin (Belgique), BELGIUM.

  • DIVE-Power - Electronics Including Inverters

    Simplified block diagram of the DIVE-Power Electronics (energy feed-in): An increase of efficiency through variation of the speed of the turbine can only be realised by inverter technology. Beside the efficiency increase, the use of IGBT Inverters for the energy feed-in brings additional advantages. These Inverters ensure a completely automation ...

    By DIVE Turbinen GmbH & Co. KG based in Amorbach, GERMANY.

  • Imesa - Stop Logs

    A sliding sluice gate on guides, its basic function is to achieve a dry area to protect a sector where maintenance and other works are being carried out.

    By Imesa S.A. based in Aranda de Duero., SPAIN. from Equipment for Hydroelectric Power Stations Product line

  • Worldcon FAMBO - Model HR Series - Hydraulic Hammers

    FAMBO is a technology orientated company, specialized in various kinds of modern pile-driving equipment. As part of the Bauer Maschinen Group of Companies, FAMBO offers a wide range of superior pile-driving equipment.

    By Worldcon Technologies Pvt. Ltd. based in Hyderabad, INDIA. from FAMBO Product line

  • Evatech - Model 22 - Hybrid Robots

    There is so much muscle on the drive system that it allows the GOAT to climb steep inclines. The response of the brain is smooth and accurate. Unlike most hydraulic units, the Hybrid GOAT generates it's own electric power. It is also environmentally friendly, fuel efficient and does not contain any fluids that could be harmful to your lawn. It is ...

    By Evatech, Inc. based in Tarpon Springs, FLORIDA (USA). from GOAT Series Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you