Only show results in Connecticut? Ok

Ocean Energy equipment for Hydro Energy

  • Premium

    Hilliard - Model M400HS - Brake Caliper

    The Hilliard M400HS brake caliper is a hydraulic applied, spring retracted brake caliper for use in heavy duty industrial applications. The brake caliper is suitable for outdoor applications and has been designed for use in many different extreme environments. The M400HS brake caliper is capable of producing a maximum 12,960 lbf (57.6 kN) of ...

    By Hilliard Corporation based in Elmira, NEW YORK (USA). from Braking Systems - Modular Brakes Product line

  • Premium

    Hilliard - High-Speed Starter Overrrunning Clutch Drive

    The Hilliard High-Speed Starter Overrunning Clutch Drive provides positive engagement and high torque on demand. Featuring a unique roller-ramp design, the clutch when engaged transmits power via the precision-machined cam and roller assembly connected to the input shaft. A ball bearing at each end of the roll cage supports and aligns the cam in ...

    By Hilliard Corporation based in Elmira, NEW YORK (USA). from Engine Starter Product line

  • Premium

    Hilliard - Model A400-T300 SH - Caliper Brake

    The A400 is an arm style caliper brake designed to accept a large selection of Hilliard thrusters. These thrusters include spring applied hydraulic released, spring applied pneumatic released, hydraulic applied spring released, and pneumatic applied spring released. The 400 requires a minimum disc diameter of 24' and is offered in 2 sizes to ...

    By Hilliard Corporation based in Elmira, NEW YORK (USA). from Braking Systems - Caliper Brakes Product line

  • Premium

    Hilliard - Pneumatic Start Assembly

    Operates on any pressurized gas (0-220 psig). Break-away torques up to 3,700 ft lb. Output speeds up to 12,000 RPM. For industrial gas turbine or reciprocating engines. Standard and custom interfaces available. Helical rotor design. Positive displacement. Roller-ramp overrunning clutch to pre-engage the starter to the turbine. Dynamically ...

    By Hilliard Corporation based in Elmira, NEW YORK (USA). from Engine Starter Product line

  • Premium

    Hilliard - Hydraulic Clutch Assembly

    Variable and fixed displacement types. SAE mounting, spline shafts. Typical operating pressures up to 5000 psig (350 bar). High-speed operation. High starting torque efficiency. Different sizes for different applications. Suitable for open and closed loop circuits. Supply includes overrunning clutch.

    By Hilliard Corporation based in Elmira, NEW YORK (USA). from Engine Starter Product line

  • Premium

    Hilliard - Electric Start Assembly

    24 volt DC power. Solenoid actuated Positork drive. Output torque up to 80 ft lb. Splined output for gas turbine applications. SAE 3 mounting flange, multi-position. CW and CCW direction of rotation.

    By Hilliard Corporation based in Elmira, NEW YORK (USA). from Engine Starter Product line

  • Premium

    Hilliard - Model A300-T300 SH - Caliper Brake

    The A300 is an arm style caliper brake designed to accept a large selection of Hilliard thrusters. These thrusters include spring applied hydraulic released, spring applied pneumatic released, hydraulic applied spring released, and pneumatic applied spring released. The A300 requires a minimum disc diameter of 12' and is offered in 4 sizes to ...

    By Hilliard Corporation based in Elmira, NEW YORK (USA). from Braking Systems - Caliper Brakes Product line

  • Premium

    Rigaku - Model NEX QC MFA - Marine Fuel Sulfur Analyzer

    Superior sulfur analysis with exceptional ease-of-use. As a premium low-cost benchtop X-ray fluorescence (XRF) analyzer, the Rigaku NEX QC MFA delivers exceptional reliability with an easy-to-learn software interface in a robust package designed for industrial fuel analysis applications.

    By Applied Rigaku Technologies, Inc. based in Austin, TEXAS (USA).

  • 3D Fiberglass Fabric - Model 3D Glass Fabric like Parabeam - Used in storage tank, marine building and wind turbine blade, etc

    3D Fiberglass Fabric is a newly developed fiberglass braided fabricconsisting of two bi-directional woven fabrics knitted together by verticalbraided pillars. Two S-shaped yarns combined form a pillar, which is8-shaped in the warp direction and 1-shaped in the weft direction.3D Fiberglass Fabric can be made of glass fiber, carbon fiber or basalt ...

    By Groupeve based in Chengdu CIty, CHINA.

  • TiPA - Tidal Turbines

    A European tidal energy consortium, led by Nova Innovation, has secured funding from the European Commission to demonstrate and validate an innovative subsystem (a direct drive power take-off (PTO) solution) for tidal turbines. The PTO subsystem is the component that transforms the mechanical power in the tidal turbine rotor into electricity that ...

    By Nova Innovation Ltd based in Edinburgh, UNITED KINGDOM.

  • Industrial Gas Turbines

    As a market leading independent service provider, Wood Group GTS is focused on delivering value based maintenance solutions to our global customer base. We provide comprehensive maintenance, repair and overhaul support for the widest range of industrial gas turbines used in the power generation, oil & gas and marine markets.

    By Wood Group GTS based in Aberdeen, Scotland, UNITED KINGDOM.

  • Primus - Model Air X - Marine Wind Turbine

    When you need energy in marine enviroments, our AIR X Marine delivers. It's hands down the best energy choice for off-grid marine-based applications in high wind environments. Use it for SCADA, telecom, security, cathodic protection -- you name it. With optimized software, AIR X Marine consistently delivers energy where it matters. The AIR X ...

    By Primus Wind Power based in Lakewood, COLORADO (USA).

  • Automatic Battery Chargers

    Charging batteries properly is more involved than you might first think. There are lots of factors to consider. Selecting he correct voltage of battery charger is essential. The output of the battery charger is equally important for ensuring long life of your battery. Choosing the wrong battery charger can have significant consequences!

    By Onboard Energy based in Nuneaton, UNITED KINGDOM.

  • SDMO and Pramac - Self Contained Off-Grid Generators

    Together with SDMO and Pramac, two of Europe’s leading generator manufacturers, Onboard Energy offer a comprehensive range of generators for prime power and standby duty. A range of water and oil cooled variants as well as alternative fuel types (Diesel, Bio-Diesel, Petrol & LPG) means that we can offer an ideal product for your ...

    By Onboard Energy based in Nuneaton, UNITED KINGDOM.

  • Model 500 - Charge Air Coolers

    Our Type 500 remains the industry standard in ultimate value and long-term reliability. This proven fixed tubesheet shell and tube heat exchanger offers the cost effectiveness that comes with having a highly standardized design, while easily providing various options to meet specific customer requirements.

    By API Heat Transfer Inc based in Buffalo, NEW YORK (USA). from Compressors Product line

  • Kaplan Hydro Turbine

    With over 50 years in the industry, HTE Engineering and its partners have provided Kaplan turbines ranging in size from 200 kW to 400 MW.

    By HydroTech Engineering, LLC based in Sandy, UTAH (USA). from Turbines Product line

  • Penguin - Wave Energy Converter

    Wello has solved challenge of producing green energy from oceans by re-purposing existing technologies and business models. The Penguin wave energy converter is based on form and re-purposes existing technologies from wind energy. Supply chain is scalable by using off-the-shelf components and shipyards to manufacture the devices. This simple ...

    By Wello Oy based in Espoo, FINLAND.

  • WaveSub - Wave Energy Device

    The WaveSub is a next generation wave energy device from Marine Power Systems. Powerful, reliable and affordable, the device addresses all of the challenges of energy generation at sea. A quarter scale prototype is set to be launched in 2017. We’ve already gained a lot of support, with Marine Power Systems securing a £2.5m investment ...

    By Marine Power Systems Ltd based in Swansea, UNITED KINGDOM.

  • Triton - Wave Energy Converter (WEC)

    Oscilla Power’s Triton wave energy converter(WEC) is a two-body point absorber with five key advantages over other WECs:

    By Oscilla Power, Inc. (OPI) based in Seattle, WASHINGTON (USA).

  • Kepler - Horizontal Axis Turbines

    There are three key technologies for extracting energy from tidal streams: ‘Conventional’ horizontal axis turbines; Dynamic Tidal Power (DTP), which is being developed by the leading Hydrology Institutes in China in conjunction with a Dutch consortium; and tidal fences, for which the patented Kepler turbine is the leading machine. The ...

    By Kepler Energy based in UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you