Petroleum Testing Articles & Analysis
12 news found
To help researchers assess the quality of these commodities, Alfa Chemistry, one of the most popular suppliers of analytical reagents, recently announced the release of a new line of petrochemical standards, which can be used to analyze and test petroleum, gasoline, fuels, hydrocarbons and many other types of petrochemical-relevant substances. ...
Screening and quality control of petroleum products and fuels can be a tedious and expensive process when performed with traditional methods. A faster and more efficient approach utilizing Near-Infrared Spectroscopy (NIRS) is presented in a free webinar by Metrohm in association with Digital Refining on June 16, 2021. Participants will get an overview what NIRS is, how to implement this ...
RU in Baghdad, Luke Oil may invest $45 billion in Iraq's oil projects by 2035. Luke Petroleum has invested about $8 billion in this area, which will reach about $45 billion by 2035, according to the agreement. ...
As momentum builds in the run-up to PEFTEC 2015 (18th-19thNovember), visitors are now able to register for free at www.PEFTEC.com. Registration will provide visitors with access to the Exhibition and technical Seminars. The Exhibition will include over 120 international laboratory and process monitoring equipment suppliers and analytical service providers. Registration is now open for the PEFTEC ...
The method requires just 2 mL sample, which makes flashpoint testing safe and reduces hazardous waste and sample costs. In contrast to classical flashpoint testing the Grabner method does not require an open flame, but detects the flashpoint through the spontaneous pressure increase inside a continuously closed cup. ...
The requirements specified for diesel fuel oils shall be determined in accordance with the following test methods: flash point; cloud point; water and sediment; carbon residue; ash; distillation; viscosity; sulfur; copper corrosion; cetane number; cetane index; aromaticity; lubricity; and conductivity. ...
These properties of the oil involved in specification limits for aging stability may be measured after the oxidative aging (and sometimes before aging) by appropriate test methods such as Test Method D924, Test Method D1169, and Test Method D664. 1. Scope 1.1 This test method ...
Referenced Documents (purchase separately) ASTM Standards D611 Test Methods for Aniline Point and Mixed Aniline Point of Petroleum Products and Hydrocarbon Solvents D2007 Test Method for Characteristic Groups in Rubber Extender and Processing Oils and Other Petroleum-Derived Oils by the Clay-Gel Absorption Chromatographic Method ...
The MINISCAN IRXpert comes fully configured with the ability to test more than 40 important parameters for both laboratory-tested and field-tested fuels. ...
The design of the engine used in this test method is representative of many, but not all, modern diesel engines. This factor, along with the accelerated operating conditions, shall be considered when extrapolating test results. 1. Scope 1.1 This test method, commonly referred to as the Cummins ISB Test, ...
Scope 1.1 This test method covers the measurement of the ability of oil and water to separate from each other. It is intended for use in testing medium and high-viscosity lubricating oils. 1.2 The values stated in SI units are to be regarded as standard. ...
This test method is used to evaluate the ability of a grease to adhere to a metal surface when subjected to direct water spray. ...