Show results for
Refine by
Energy Equipment & Supplies In In Sri Lanka
7 equipment items found
Manufactured by:HRS Heat Exchangers Ltd. based inWatford, UNITED KINGDOM
HRS Gasketed Plate Heat Exchangers are manufactured as standard from either AISI 304/316 stainless steel or titanium to a thickness of 0.6mm, although plate thickness options of 0.8mm or 1.0mm are also available if required. The exchangers are fitted with EPDM or NBR gaskets with the frames constructed from painted carbon steel. A double seal arrangement around the two ports ensures that if fluid ...
Manufactured by:HRS Heat Exchangers Ltd. based inWatford, UNITED KINGDOM
The HRS Brazed Plate Heat Exchanger range works on the same principle as conventional plate heat exchangers, but consists of a pack of corrugated plates joined together and sealed by furnace brazing. Typically the units are copper brazed, however for applications where the medium is aggressive to copper, or for where temperatures range from 225°C to 400°C, then nickel is used. The plates ...
Manufactured by:HRS Heat Exchangers Ltd. based inWatford, UNITED KINGDOM
The HRS Digestate Concentration System (DCS) reduces the volume of digestate from anaerobic digestion while increasing its value. In most situations, it is able to do this using surplus heat from the CHP engine or biogas boiler, which can be used up to four times by incorporating multi-effect evaporation ...
Manufactured by:HRS Heat Exchangers Ltd. based inWatford, UNITED KINGDOM
The HRS SI Series is a multitube shell and tube heat exchanger designed with the added security of a double tubeplate, providing leak detection to avoid cross contamination between the service and product fluids. The HRS SI series is perfect for industrial applications. Using our corrugation technology, heat transfer and efficiency are increased over standard smooth tube heat exchangers. In ...
Manufactured by:HRS Heat Exchangers Ltd. based inWatford, UNITED KINGDOM
The HRS SP Series is a multitube shell and tube heat exchanger designed with the added security of a double tubeplate, providing leak detection to avoid cross contamination between the service and product fluids. The HRS SP series is perfect for pharmaceutical applications. Using our corrugation technology, heat transfer and efficiency are increased over standard smooth tube heat exchangers. In ...
Manufactured by:HRS Heat Exchangers Ltd. based inWatford, UNITED KINGDOM
The HRS Biogas Dehumidification System (BDS) removes water from biogas, protecting combined heat and power (CHP) engines from corrosion and cavitation. It can be supplied with a heat recovery section, increasing the overall efficiency of anaerobic digestion (AD) ...
Manufactured by:HRS Heat Exchangers Ltd. based inWatford, UNITED KINGDOM
The HRS DPS Digestate Pasteurisation System has been specifically designed to meet the requirements of pasteurisation in the anaerobic digestion and renewable energy sectors. The DPS is capable of pasteurising digestate, feedstocks, sludge and similar materials and is suitable for both pre-and post-digestion pasteurisation, allowing operators to maximise the efficiency of their overall process ...