Endeas QuickSun - Model 800-Series -Economic Tunnel or Tower Simulator for Manufacturing, Laboratory and Mobile Applications
QuickSun 800-Series solar simulators are always tested, certified and results reported exactly as specified in the applicable solar simulator standards and this is being proved by a globally recognized inspection body, SGS Fimko Ltd.
- Class AAA solar simulator
- Accurate PERC module testing
- Up to 150 cm × 220 cm test area
- Options: EL imaging and electrical safety measurement
In order to comply with the Class AAA tolerances of the standard IEC 60904-09, ed. 2, proprietary optics has been developed for filtering the spectrum and improving irradiance non-uniformity. Since voltage, current and irradiance signals are recorded simultaneously, Short Term Instability (STI) is inherently 0% and in A class.
QuickSun 800-Series simulators are routinely applied to measure standard mono/polycrystalline silicon, or a-Si, CdTe and CIS/CIGS PV modules. The measurement of thin film materials only requires filtering of the monitor cell in order to comply with the spectral response of the material to be measured.
All QuickSun 800-Series simulators are equipped with two flash generators. This extends the length of the flash pulse and improves Long Term Instability (LTI). Capacitance Compensation (CAC) method allows testing of high capacitance PV materials.
EL imaging option is available with two integrated 8.3 MP CCD cameras. This results in about 500 μm pixel resolution and enables visual detection of faults like micro cracks. Typical exposure time is 5–20 seconds and 850 W power source provides up to 14 A to 72 cells c-Si modules.
Also instrumentation for Electrical Safety Testing option is available including manual frame contacting. True leakage current and insulation resistance are evaluated simultaneously with nA scale measurement sensitivity which confirms also reliable frame contacting.