- Home
- Equipment
- australasia
- chp engine
Refine by
Chp Engine Equipment Supplied In Australasia
13 equipment items found
Premium
Manufactured by:Aerzener Maschinenfabrik GmbH based inAerzen, GERMANY
The use of biogas as an energy source will considerably help achieve the environmental objectives set nationally and internationally; be that reducing reliance on nuclear energy or the reduction of CO2 emissions. Specially designed for the biogas market, AERZEN biogas blowers of series GM ensure ultimate reliability and ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
Gas engines are highly efficient at providing the stimulus for the growth of plants, whilst in parallel providing a flexible supply of electrical power. Heat, light and carbon dioxide (CO2) all promote plant growth. Gas engines provide electrical power at the alternator and when in a cogeneration configuration can also recover useful heat. Carbon dioxide is released in the exhaust gases of the ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
Syngas, also known as synthesis gas, synthetic gas or producer gas, can be produced from a variety of different materials that contain carbon. These can include biomass (wood gas), plastics, coal, municipal waste or similar materials. Historically town gas was used to provide a gas supply to many residences in Europe and other industrialised countries in the 20th Century. Gas engines utilising ...
Manufactured by:HRS Heat Exchangers Ltd. based inWatford, UNITED KINGDOM
The HRS Biogas Dehumidification System (BDS) removes water from biogas, protecting combined heat and power (CHP) engines from corrosion and cavitation. It can be supplied with a heat recovery section, increasing the overall efficiency of anaerobic digestion (AD) ...
Manufactured by:SUEZ Water Technologies and Solutions based inTrevose, PENNSYLVANIA (USA)
Designed to recycle biosolids into methane and valuable byproducts, SUEZ’s advanced anaerobic digestion technologies use bacteria in the absence of oxygen to break down matter to create biogas. The biogas can be combusted or oxidized and used for heating or with a CHP engine to produce electricity and heat; it can also be compressed and used as fuel for ...
Manufactured by:SUEZ Water Technologies and Solutions based inTrevose, PENNSYLVANIA (USA)
Designed to recycle biosolids into methane and valuable byproducts, SUEZ’s advanced anaerobic digestion technologies use bacteria in the absence of oxygen to break down matter to create biogas. The biogas can be combusted or oxidized and used for heating or with a CHP engine to produce electricity and heat; it can also be compressed and used as fuel for ...
Manufactured by:HRS Heat Exchangers Ltd. based inWatford, UNITED KINGDOM
The HRS Digestate Concentration System (DCS) reduces the volume of digestate from anaerobic digestion while increasing its value. In most situations, it is able to do this using surplus heat from the CHP engine or biogas boiler, which can be used up to four times by incorporating multi-effect evaporation ...
Manufactured by:Alvan Blanch Development Company Limited based inWiltshire, UNITED KINGDOM
The main reason for drying biomass is to increase the combustion efficiency by de-watering the biomass products. The solid biomass system has drawn more attention to utilising waste heat from biomass boilers and CHP engines as a biomass drying process. Further encouraged by various government renewable heat schemes (such as RHI) solid biomass (including solid ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
Continuously refined on GE Jenbacher’s extensive experience, the GE Jenbacher type 6 engines are reliable, advanced products serving the 1.8 to 4.4 MW power range. It’s 1,500 rpm engine speed results in a high power density and low installation costs. The type 6 pre-combustion chamber achieves maximum efficiency with low emissions. Proven design and optimised components enable a ...
Manufactured by:Inoplex based inNoosaville QLD, AUSTRALIA
The Inoplex Renewable Energy Generator (REG) is a highly efficient system designed to convert waste into energy through a combination of gasification and cogeneration. This innovation emerges from years of rigorous development and research, aimed at addressing Australia's escalating waste and energy crisis. The REG system offers a scalable solution that efficiently reduces waste management costs ...
Manufactured by:Pyrotech Energy based inMelbourne, AUSTRALIA
Pyroflash technology is unique in simultaneous production of several qualities of bio-crude oil. Normally we distinguish these oils between two qualities: Dry Oil (3w% water content) and Wet oil (20w% water content). The Dry oil has an HHV of 24 MJ/kg and the Wet oil has an HHV OF 17 MJ/kg. The Wet oil is liquid at room temperature, whereas the Dry oil is solid in room temperature. ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
Cogeneration (cogen) through combined heat and power (CHP) is the simultaneous production of electricity with the recovery and utilisation heat. Cogeneration is a highly efficient form of energy conversion and it can achieve primary energy savings of approximately 40% by compared to the separate purchase of electricity from the national electricity grid and a gas boiler for onsite heating. ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
Using a combined heat and power (CHP) or cogeneration plant in a hospital is an ideal way of achieving improved energy efficiency and reduced carbon emissions. Its utilisation helps a hospital’s limited financial resources go further. Natural gas is a clean-burning low carbon emission fuel. A CHP plant facilitates the high efficiency use of this fuel, by recovering not only electricity but ...