Show results for
Refine by
Cooling Heating Equipment Supplied In Peru
9 equipment items found
Premium
Manufactured by:Aerzener Maschinenfabrik GmbH based inAerzen, GERMANY
AERZEN oil-free, compressing screw compressors are used in a variety of highly demanding areas of application, namely those in which the quality of the conveyed medium can significantly influence the production process and the finished ...
Manufactured by:Endress+Hauser Group Services AG based inReinach, SWITZERLAND
The BTU meter RH33 is used in applications with liquid energy carriers. It calculates the thermal energy of water acc. to EN1434, glycol/water mixtures or other fluids such as thermal oils. Temperature sensor matching using calibrated temperature sensors is done in the device. Potential for cost savings can be shown by using the software available as an accessory. The device has a custody ...
Manufactured by:Energy Efficiency Done Right (EEDR) based inHong Kong, CHINA
The IN'FLECTOR insulating panel is reversible, so the reflective surface can face outward during the seasons when solar gain is a problem, and the carbon PVC surface can face outward during cold seasons to reflect heat back into the building and collect convective sunlight for conversion to radiant heat. The panel is held in place with magnets which form a virtually air tight seal and inhibits ...
Manufactured by:Energy Efficiency Done Right (EEDR) based inHong Kong, CHINA
The IN'FLECTOR insulating panel is reversible, so the reflective surface can face outward during the seasons when solar gain is a problem, and the carbon PVC surface can face outward during cold seasons to reflect heat back into the building and collect convective sunlight for conversion to radiant heat. The panel is held in place with magnets which form a virtually air tight seal and inhibits ...
Manufactured by:Acme Engineering Prod. Ltd. based inMont-Royal, QUEBEC (CANADA)
ACME Electric Steam Superheaters are available for use with steam boilers as auxiliary pieces of equipment. Our superheaters are all custom-made and built to meet the specific design requirements of each application. A superheater increases the temperature of the steam but does not increase the latent heat of evaporation. This means that heating with superheated steam is similar to heating with ...
Manufactured by:Carbolite Gero Ltd - part of Verder Scientific based inHope, UNITED KINGDOM
Carbolite Gero offers continuous mesh belt furnaces with a maximum operating temperature of 1100 °C. Mesh belt furnaces are suitable for a wide range of heat treat applications including hardening, annealing, tempering and stress relieving. Furnaces can be designed for single or multi-zone operation and water cooled zones can also be offered. Each mesh belt ...
Manufactured by:Carbolite Gero Ltd - part of Verder Scientific based inHope, UNITED KINGDOM
With the special design of the PDS type furnaces, it is possible to do both, debinding and sintering in one furnace. For debinding, a special gas guiding configuration and molybdenum retort are utilized to protect the heating elements from all gaseous by-products. The heating elements and radiation shields are also constructed of molybdenum. The system is ...
Manufactured by:Carbolite Gero Ltd - part of Verder Scientific based inHope, UNITED KINGDOM
The GLO annealing furnace features a vacuum tight retort with highly symmetric positioning of the heating elements. The heating elements are CrFeAl, also known as APM, and are embedded in the ceramic fibre insulation. The GLO is often equipped with a vacuum pumping system to reduce the Oxygen levels prior to heat treatment. To ensure the lowest possible contamination levels, several cycles of ...
Manufactured by:Amandus Kahl GmbH & Co. KG based inReinbek, GERMANY
More than 1000 KAHL belt units are in operation worldwide and work in different sectors. Before you decide on a belt drier, you have the opportunity to perform a belt drier simulation for your project in our pilot ...