Refine by
Fuel Testing Equipment & Supplies In Lithuania
96 equipment items found
Premium
Manufactured by:Dieselcraft Fluid Engineering Div of Magnum Group based inAuburn, CALIFORNIA (USA)
W-5 Test Kit: Test For Water in the Diesel Fuel Will work for clear and with red dyed ...
Manufactured by:CFR Engines Canada ULC based inOttawa, ONTARIO (CANADA)
The IQT-XLM Model is an advanced system designed for comprehensive testing and certification of diesel fuels and their alternative counterparts. Developed by CFR Engines Inc., this instrument incorporates a Constant Volume Combustion Chamber (CVCC) and has been a reliable tool since 1998 for refineries and laboratories worldwide. The IQT-XLM combines the ...
Manufactured by:D-2 Inc. based inBourne, MASSACHUSETTS (USA)
Packaged in durable, waterproof cases, the kit is compliant with the ATPD-2424A standard. Its equipment is engineered to operate in temperatures ranging from -30°C to 50°C, with rigorous testing and certification conducted by Southwest Research ensuring its performance under these conditions. The PEAK kit is available in two configurations: a single-case version for the ...
Premium
Manufactured by:Dieselcraft Fluid Engineering Div of Magnum Group based inAuburn, CALIFORNIA (USA)
Did gasoline end up in a diesel fuel tank by mistake? If you THINK there is gasoline in the fuel you need to KNOW for sure or risk engine damage. To be 100% sure of contamination with gasoline you must send a sample to our lab. We will send you the container and a postage paid package to return the sample to the lab by Priority Mail. Once the lab gets the sample ...
by:Core Laboratories based inRotterdam, NETHERLANDS
The model F-1/F-2 Combination CFR engine is used to determine the octane quality of gasoline and fuel blending components. This unit is recognized and approved by ASTM D2699 and D2700. This unit is equipped with a heavy duty CFR-48D type crankcase, variable compression cylinder, carburetor with adjustable fuel to air ratio, and knock measurement ...
by:Core Laboratories based inRotterdam, NETHERLANDS
The model F-5 CFR engine is a complete system for diesel fuel cetane number determination, conforming to ASTM D613 Standard Test Method for Cetane Number of Diesel Fuel Oil. This method is accepted worldwide as the standard for determining the ignition quality of diesel ...
by:Core Laboratories based inRotterdam, NETHERLANDS
The model FIT (Fuel Ignition Tester) is a desktop analyzer designed to rate derived cetane number. The FIT conforms to ASTM D7170 and IP method #PM-DI-05 to provide automated analysis of diesel fuel DCN. The analyzer is easy to use, compact and robust with a simple computerized operator interface. Maintenance of the FIT is ...
Premium
Manufactured by:Dieselcraft Fluid Engineering Div of Magnum Group based inAuburn, CALIFORNIA (USA)
Test is designed as a field; PASS OR FAIL. Test detects water and suspended solid contaminants in diesel fuels. Very simple and immediate. If all 5 indicator marks are visible the test PASSES but if the indicator lines disappear then the fuel FAILS. Failed tests require Fuel ...
Premium
Manufactured by:Smart Testsolutions GmbH based inZentrale Stuttgart, GERMANY
The CVM systems with MASTER feature comprehensive functionalities and high-speed data transmission and processing. A complete system consists of the number of CVM G5 measuring modules required for the respective application, a bus module, a termination module and a process module. Adding the process modules Master or SlimMASTER to the measurement module stack enables more comprehensive as well as ...
Premium
Manufactured by:Zeltex LLC based inHagerstown, MARYLAND (USA)
Decades of expertise in portable octane, cetane and bio-fuel with lab-accurate analysis. 45 State Agencies have used Zeltex portable fuel octane analyzers over the years, making the ZX-101 series the gold standard in portable fuel testing. The main way that fuel is analyzed is through a CFR engine, which takes ...
Premium
Manufactured by:Smart Testsolutions GmbH based inZentrale Stuttgart, GERMANY
With test systems for Fuel Cell Control Units (FCCUs), developers can test the electronic components of fuel cell or battery systems without needing a real system. An essential component of the systems we develop for our customers is therefore cell voltage simulation (CVS). ...
Premium
Manufactured by:Dieselcraft Fluid Engineering Div of Magnum Group based inAuburn, CALIFORNIA (USA)
If you need to count on your backup power supply, you better be testing your fuel and polishing it on a regular basis. Never assume the fuel is good to go and then find out in an emergency that the fuel has a problem. From 400 gallons per hour to over 1200 gallons per hour of portable fuel ...
Premium
Manufactured by:Dieselcraft Fluid Engineering Div of Magnum Group based inAuburn, CALIFORNIA (USA)
The fuel industry tells us that fuel can have up to 200 ppm of water BUT your engine manufacture will tell you after you have a problem that ZERO water is allowed. Our W-5 Test Kit: Test For Water in your Diesel Fuel. Will work for clear and with red dyed ...
Premium
Manufactured by:Smart Testsolutions GmbH based inZentrale Stuttgart, GERMANY
The CVM measurement modules for precise cell voltage measurement on fuel cells, batteries and electrolyzers have proven themselves hundreds of times and deliver reliable measurement results even in harsh field conditions. Thanks to a variety of interfaces, they can be used excellently with common PC systems as well as in embedded systems. For processing the measurement signals and combining them ...
Premium
Manufactured by:Smart Testsolutions GmbH based inZentrale Stuttgart, GERMANY
For the commissioning and testing of cell voltage measurement electronics and FuelCell control units, and in particular for the software testing of such ECUs, it is necessary to simulate cell-specific voltage values. The simulation modules of the MCM IntelliSim series, in conjunction with a master module enable active simulation of a fuel cell ...
Premium
Manufactured by:AMETEK Spectro Scientific based inChelmsford, MASSACHUSETTS (USA)
The FDM 6000 is a portable, battery operated fuel dilution meter that determines the concentration of fuel dilution present in an oil sample within a matter of minutes. The FDM 6000 uses a unique patent pending fang design to pierce the cap of a disposable sample vial and draws in the headspace from the vial. The headspace flows over a SAW (Surface Acoustic Wave) ...
Manufactured by:Cast Aluminum Solutions, LLC based inBatavia, ILLINOIS (USA)
APPLICATIONS: Rocket & Jet Fuel Test Stands. Mud Testing Applications (oil exploration). LNG Pre-Heat & Moisture Removal. Powder Coating Pre-Wash Systems. Packaging Sterilization. Phase Change for Cryogenic ...
Manufactured by:Grabner Instruments - AMETEK based inVienna, AUSTRIA
The MOBILE FUEL LAB is the ideal solution for fast and precise fuel quality checks in the field. Equipped with the portable, rugged and fully automated analyzers of Grabner Instruments, a detailed fuel analysis can be performed in less than 30 minutes by a single person directly on-site. The GRABNER INSTRUMENTS Mobile Fuel Lab ...
Manufactured by:Carbolite Gero Ltd - part of Verder Scientific based inHope, UNITED KINGDOM
The CAF G5 is a furnace designed to test ash fusibility, and optionally, the increasingly popular determination of biomass or solid recovered fuels testing. The coal ash fusibility test furnace conforms to the Standards ISO 540:2008; ASTM D 1857 / D1857M – 04 (2010); DIN 51730:2007-09; DD CEN/TS 15370-1:2006 (biomass) and ...
Manufactured by:Greens Combustion Limited based inPoole, UNITED KINGDOM
To enable Greens Combustion to develop their burner portfolio, we have a purpose built testing facility and also utilise parners in Europe to allow us to further enhance our testing ...