- Home
- Equipment
- australasia
- heat recovery
Show results for
Refine by
Applications
- Heat Exchangers Solutions for Evaporation & Concentration of Environmental Waste Streams Sector
- Heat Exchangers Solutions for Anaerobic Digestion (AD) and Biogas Industry
- Heat Exchangers Solutions for Biodiesel Industry
- Heat Exchangers Solutions for Palm Oil Sector
- Li-ion battery electrode manufacturing
- Heat Exchangers Solutions for Bioethanol Industry
- Environmental solutions for the waste incineration industry
Heat Recovery Equipment Supplied In Australasia
30 equipment items found
Premium
Manufactured by:Anguil Environmental Systems, Inc. based inMilwaukee, WISCONSIN (USA)
Every energy demand is unique, as is every energy-efficiency improvement opportunity. At Anguil, our track record includes an ability to blend time-tested, standard products with innovative, custom engineered solutions. We design, manufacture, and install energy recovery systems that decrease your energy consumption, reduce operating costs and maximize return on ...
Manufactured by:Inciner8 Limited based inSouthport, UNITED KINGDOM
Get something back from your waste with our innovative range of heat exchange modules. Inciner8 have found the optimal way to convert energy from waste and make it usable whether you need it for washing, disinfection, heating, or for your technological ...
Manufactured by:Windsor Engineering based inPorirua, NEW ZEALAND
Crossle Coils manufacture a wide range of Hot Water or Thermal Fluid Heat Recovery Coils. A Heat Recovery Coil is principally designed to Extract normally expelled heat from a Flue Gas Stream or a Hot Air Stream and to utilise the recovered heat for pre-heating the boiler feed ...
Manufactured by:Gasco Pty Ltd. based inMelbourne, AUSTRALIA
Waste Heat Recovery systems utilise existing energy sources in order to efficiently generate thermal heat, process heat or electricity. These systems reduce energy costs, provide carbon credits for emission trading systems and help the environment by reducing ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
Approximately 25% of the usable energy of the fuel gas is released in the exhaust of the gas engine. This can be captured for cogeneration in a combined heat and power plant. This heat exits the engine at ~450oC as ‘high grade heat’, contrasting to ‘low-grade heat’ available from the generator cooling circuits. This high temperature and flow makes it well suited for ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
Exhaust gas heat exchangers (EGHE) utilise waste heat from the exhaust of the GE's Jenbacher gas engine cogeneration plant. They are typically located adjacent to the engine or are mounted on the roof of a containerised combined heat and power unit. They are present in a wide range of different applications and along with the other systems can be used to achieve overall system efficiencies of ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
Absorption chillers can be used to deliver a trigeneration solution for a combined heat and power plant. Absorption chillers produce chilled water by heating two different substances that are in thermal equilibrium to separation, then reuniting them through heat removal. An example of two substances that may be used for this process is water and lithium bromide. Absorption chillers can be ...
Manufactured by:Inciner8 Limited based inSouthport, UNITED KINGDOM
Get something back from your waste with our innovative range of heat exchange modules. Inciner8 have found the optimal way to convert energy from waste and make it usable whether you need it for washing, disinfection, heating, or for your technological process. Inciner8's unique, patented air heat exchangers are a recovery ...
Manufactured by:HRS Heat Exchangers Ltd. based inWatford, UNITED KINGDOM
The HRS Brazed Plate Heat Exchanger range works on the same principle as conventional plate heat exchangers, but consists of a pack of corrugated plates joined together and sealed by furnace brazing. Typically the units are copper brazed, however for applications where the medium is aggressive to copper, or for where temperatures range from 225°C to ...
Manufactured by:HRS Heat Exchangers Ltd. based inWatford, UNITED KINGDOM
The HRS Biogas Dehumidification System (BDS) removes water from biogas, protecting combined heat and power (CHP) engines from corrosion and cavitation. It can be supplied with a heat recovery section, increasing the overall efficiency of anaerobic digestion (AD) ...
Premium
Manufactured by:Aerzener Maschinenfabrik GmbH based inAerzen, GERMANY
AERZEN oil-free, compressing screw compressors are used in a variety of highly demanding areas of application, namely those in which the quality of the conveyed medium can significantly influence the production process and the finished ...
by:Dioxide Pacific Consulting Engineers based inNarrabeen, AUSTRALIA
If swimming pool backwash water is discharged to sewer or used for irrigation, the energy used to heat that water is also wasted. The CircleClear system allows this heat energy to be ...
Manufactured by:Munters based inAmesbury, MASSACHUSETTS (USA)
Des Champs heat exchangers offer designs utilizing plate counterflow heat exchangers, heat pipe, and energy recovery wheels. These heat exchangers form the backbone of many system configurations and can be configured with unique traversing frost prevention. Des Champs heat exchangers have been ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
The Jenbacher Type-2 gas engine was introduced in 1974 and is the engine with the longest development history of the range. The 208 has 8 inline cylinders and is available at electrical output from 249kWe or 335kWe. The J208 is renowned for its robust design and highest levels of component durability. It is particularly well suited to troublesome gases such as landfill ...
Manufactured by:Munters based inAmesbury, MASSACHUSETTS (USA)
Adding Z-Duct allows for the introduction of more outdoor ventilation air without overloading the HVAC system. Z-Duct plate heat exchangers offer multiple flow configurations, have extremely low-leakage and high energy-transfer. Pressure drop is minimized and heat-transfer maximized by dimples in the plates which separate the plates. The continuous fold construction of Z-Duct reduces or ...
Manufactured by:Munters based inAmesbury, MASSACHUSETTS (USA)
Adding Z-Duct allows for the introduction of more outdoor ventilation air without overloading the HVAC system. Z-Duct plate heat exchangers offer multiple flow configurations, have extremely low-leakage and high energy-transfer. Pressure drop is minimized and heat-transfer maximized by dimples in the plates which separate the plates. The continuous fold construction of Z-Duct reduces or ...
Manufactured by:Munters based inAmesbury, MASSACHUSETTS (USA)
Adding Z-Duct allows for the introduction of more outdoor ventilation air without overloading the HVAC system. Z-Duct plate heat exchangers offer multiple flow configurations, have extremely low-leakage and high energy-transfer. Pressure drop is minimized and heat-transfer maximized by dimples in the plates which separate the plates. The continuous fold construction of Z-Duct reduces or ...
Manufactured by:Munters based inAmesbury, MASSACHUSETTS (USA)
Adding Z-Duct allows for the introduction of more outdoor ventilation air without overloading the HVAC system. Z-Duct plate heat exchangers offer multiple flow configurations, have extremely low-leakage and high energy-transfer. Pressure drop is minimized and heat-transfer maximized by dimples in the plates which separate the plates. The continuous fold construction of Z-Duct reduces or ...
Manufactured by:Munters based inAmesbury, MASSACHUSETTS (USA)
Adding Z-Duct allows for the introduction of more outdoor ventilation air without overloading the HVAC system. Z-Duct plate heat exchangers offer multiple flow configurations, have extremely low-leakage and high energy-transfer. Pressure drop is minimized and heat-transfer maximized by dimples in the plates which separate the plates. The continuous fold construction of Z-Duct reduces or ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
Continuously refined on GE Jenbacher’s extensive experience, the GE Jenbacher type 6 engines are reliable, advanced products serving the 1.8 to 4.4 MW power range. It’s 1,500 rpm engine speed results in a high power density and low installation costs. The type 6 pre-combustion chamber achieves maximum efficiency with low emissions. Proven design and optimised components enable a ...