Show results for
Refine by
Power Generation Equipment Supplied In Chile
37 equipment items found
Manufactured by:Elecnor based inMadrid, SPAIN
Elecnor is firmly committed to entering as a benchmark investor, diversifying its renewable energy portfolio with photovoltaic and thermoelectric solar energy projects. In this section, Elecnor has developed three 50 MW thermosolar plants, Astexol located in the municipality of Badajoz, and Aste 1A and Aste 1B, also of 50 MW each, located in Alcázar de San Juan (Ciudad Real), in which the ...
Manufactured by:Elecnor based inMadrid, SPAIN
Feasibility studies. Cost-finance analysis. Project administration procedures. Permitting and planning management. Construction and detailed engineering project design. Turnkey construction. Operation and maintenance. Operations ...
Manufactured by:Elecnor based inMadrid, SPAIN
In wind energy, Elecnor has not only built numerous turnkey wind farms throughout Spain for various developers, but also acts as a developer and operator through its subsidiary ...
Manufactured by:Elecnor based inMadrid, SPAIN
Elecnor has developed its own design and construction style for large-scale solar photovoltaic (PV) facilities, becoming a benchmark in the Spanish market. Also, thanks to the experience of its pioneering PV subsidiary Atersa, Elecnor now boasts one of the largest capacities to produce all the necessary components and equipment to configure any off-grid and grid-connected PV system. In Atersa's ...
Showcase
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
Designed to ASME Code standards, they accommodate mesh-lined or perforated baskets and offer options like internal bypass, differential pressure gauges, and varied material constructions to fit oil & gas, power generation, pipeline, and refinery ...
Manufactured by:Canyon Hydro based inDeming, WASHINGTON (USA)
Hydroelectric systems from Canyon Hydro deliver exceptionally high efficiency and reliability. Built for continuous, uninterrupted power generation, they deliver a high return on your investment year after ...
Manufactured by:Canyon Hydro based inDeming, WASHINGTON (USA)
Everything you need for your powerhouse. Canyon Hydro is your single-source US manufacturer, supplier and installer for all of your power generating equipment. This often includes the turbine, generator, mounting frames, turbine inlet valve, automated controls, switchgear and step-up transformer. Efficiency and durability are the highest ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
Designed for high-speed operation, these assemblies feature SAE mounting and spline shafts, ensuring compatibility with open and closed-loop circuits. Ideal for marine, oil & gas, and power generation ...
Manufactured by:Solarnova Deutschland GmbH based inWedel, GERMANY
The fully adjustable tracking system permits glare-free shading all day with optimum daylight yield and high solar power ...
Premium
Manufactured by:Aerzener Maschinenfabrik GmbH based inAerzen, GERMANY
They supply the highest differential pressures or pressure ratios in the AERZEN product portfolio – the oil flooded compressor series VMY. VMY compressors are the ideal solution for low molar weights, coolants, and generally for fluctuating operation conditions and gas ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
HILCO Electric Start Assemblies deliver reliable 24 V DC starting power with solenoid-actuated Positork drives. Designed for SAE-3 mounting, they offer clockwise and counterclockwise rotation options and deliver up to 80 ft-lb torque. Engineered for rugged industrial use, these starters ensure smooth, dependable engine starts in marine, power ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
The Hilliard BBH1 Power Unit is a base model that includes on/off and ramped braking modes. With integral manifold mounting and heavy duty pump with fail-safe design, many options are available to customize the system to the specific needs of the ...
Manufactured by:Carnegie Clean Energy based inNorth Fremantle, AUSTRALIA
The CETO 6 design builds on the experience gained in all previous CETO generations and incorporates some important improvements. The diameter of the buoyant actuator has the most significant influence on power output and has been increased to approximately 20m from the 7m diameter 80kW unit successfully tested at the Garden Island site in 2011 and the most recent ...
Manufactured by:Eshia S.L. based inSan Adrián de Besós, SPAIN
Solar generator maximum power (25° C) 300Wp for 12V, 600Wp for 24V. 1200Wp for 48 V. Operation mode (microprocessor) 2 MPP-Ind. ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
The Hilliard BBH2 Power Unit incorporates an engineered hydraulic circuit to control the brake torque during a typical stop. Large capacity hydraulic accumulators provide additional volume for precise control of brake pressure. Equipped with manual overrides and hand pump for power outages, high pressure filtration and control braking mode to meet sophisticated braking system ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
The Hilliard MK4800 is an electromagnetic, fail safe caliper brake. Spring applied, electric released, it is suitable for holding duty and emergency for applications such as heavy duty lift operations, conveyors, elevators and cranes. Alternative mounting arrangement: pin mounting, base mounting horizontal and base mounting angle. The MK4800 is capable of producing a maximum 4,800 LBF of braking ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
Designed to boost ISO cleanliness, they come in standard or extended-tube versions, with durable disposable or washable media options and nylon or metal end caps. Suitable for industrial use across marine, mining, gas, power generation, oil & gas, pulp & paper, refinery, and steel ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
The Hilliard MK350 is an electromagnetic, fail safe caliper brake. Spring applied, electric released, it is suitable for holding duty and emergency for applications such as conveyors, elevators and cranes. Alternative mounting arrangement: pin mounting, base mounting horizontal and base mounting angle. The MK350 is capable of producing a maximum 350 LBF of braking force with up to 210 VDC release ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
HILCO manufactures complete fuel filtration systems which can incorporate all or any combination of these contaminate removal techniques. Put HILCO's expertise to work in solving your most difficult liquid fuel filtration ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
HILCO Six‑Port Standard Transfer Valves provide precise, multi-path fluid routing in industrial systems. Available in same‑side or opposite‑side six‑port layouts, they employ spring‑ and pressure‑loaded sealing pads (not plugs) for tight leak control. Built from heavy‑wall steel or stainless tubing for durability, they offer low torque, low pressure drop, and simple top/bottom ...