Show results for
Refine by
Power Generation Unit Equipment Supplied In Usa Iowa
20 equipment items found
Manufactured by:Power Temp Systems, Inc. based inBroussard, IOWA (USA)
Our California style hard-wire connectors are used to hard-wire into the power source (utility or generator), and provide power to a Temporary Power Box, RV Gang Box, Power Cable or anything requiring a 50Amp 125/250V 1Ø “CS Style” connection. Reverse service Hard-wire Plug (Male) also available for installing on ...
Manufactured by:Wolf Material Handling Systems based inMuscatine, IOWA (USA)
Stacker reclaimers are a combination of a radial stacker and an above ground reclaimer. They can use automation to store and reclaim material as needed. Common industries that use stacker reclaimers include biomass, paper, power generation, and ...
Manufactured by:Evapco Inc. based inWestminster, MARYLAND (USA)
An EvapTech EX Cooling Tower is an induced draft, crossflow tower custom designed to meet our customers' requirements for cost, footprint, power consumption and ...
Manufactured by:Power Temp Systems, Inc. based inBroussard, IOWA (USA)
Add-On Generator Quick Connect Tap Boxes go by many names, including quick connect generator docking station, portable generator connection box, generator docking panel, or generator tap ...
Manufactured by:Evapco Inc. based inWestminster, MARYLAND (USA)
For steam cycles of 1 to 1000MW, EVAPCO-BLCT Dry Cooling can supply the Air Cooled Condenser that is right for your application. Irrespective of fuel source, biomass, fossil, or solar, an EVAPCO-BLCT Dry Cooling ACC can significantly reduce the water requirements of any power plant utilizing a steam ...
Manufactured by:American Power Group, Inc. (APG) based inAlgona, IOWA (USA)
The S4000 Dual Fuel System will cut operating costs, reduce emissions and harness the potential of alternative energy ...
Manufactured by:Frontline BioEnergy, LLC based inNevada, IOWA (USA)
Our process can also supply power to internal combustion engines, combustion turbines, utility boilers, and high-pressure steam turbines to produce ...
Manufactured by:Turolla - Danfoss Power Solutions S.r.l. based inCastel San Pietro Terme, ITALY
ezePower is the Turolla hydraulic motor-powered electrical generator for use in mobile equipment applications. The generator produces a small amount of electrical power in areas of a machine that are too difficult, too costly, or too dangerous to run electrical wiring to. ezePower eliminates dependency on wires across troublesome areas such as electric swivels, repetitive bend joints, and lengthy ...
Manufactured by:Eagle Point Solar based inDubuque, IOWA (USA)
Solar modules and battery storage make the perfect pair, allowing you to generate and store clean, affordable energy. Store electricity in the battery during the day when the sun is out and consume it later after sun-set or on-demand, making the most use of the solar system. Solar battery storage is useful if you have time-of-use billing, a utility provider without net-metering, or frequent power ...
Manufactured by:American Power Group, Inc. (APG) based inAlgona, IOWA (USA)
APG offers Dual Fuel Conversions for 50kW to 12MW diesel generators, delivering uninterrupted power and unmatched savings! The S4000 Dual Fuel System will cut operating costs, reduce emissions and harness the potential of alternative energy ...
Manufactured by:Chevron Renewable Energy Group based inAmes, IOWA (USA)
REG Bio-Residual® Oil is developed by Chevron Renewable Energy Group and is a lower carbon solution for generating energy, or for use in other industrial applications. As one of the nation’s largest producer of biofuels, Chevron Renewable Energy Group offers a consistent supply of high-performing REG Bio-Residual® Oil for use as an alternative to traditional fuel oils. ...
Manufactured by:Eaton Corporation based inCleveland, OHIO (USA)
The PSG Series is a line of general-purpose power supplies for use in a wide variety of industrial control applications. Applications include communication networks, sensors, PLCs and many other electrical systems. Each model is equipped with the options of a rugged metal or plastic housing, heavy-duty screw or finger-safe terminals and a variety of protection features, making the PSG one of the ...
Manufactured by:Eaton Corporation based inCleveland, OHIO (USA)
The XT IEC series includes non-reversing and reversing contactors and starters as well as overload relays and accessories. Enclosed control options include metallic and non metallic enclosures with circuit breakers, and North American or European fuses. The XT line of IEC motor control is not the same as traditional motor control designs. XT was designed to be engineered ...
Manufactured by:Eaton Corporation based inCleveland, OHIO (USA)
Eaton's Automatic Transfer Switches guarantee reliable, seamless power when outages occur. They automatically transfer power to the generator when utility power fails, providing the highest protection for continuous power. Our unique active load control inside our GREEN ATSs allows you to save money up front by downsizing the generator to purchase, and provides ongoing savings in operating costs, ...
Manufactured by:Eaton Corporation based inCleveland, OHIO (USA)
Eaton's standby generators continually monitor your home's connection to the local electric utility. Outages trigger the system to automatically switch to generator power until local power is restored. All models are fully automatic. Homeowners can obtain levels of power suitable for running everything from specific applications, such as sump pumps and refrigerators, to complete whole-home or ...
Manufactured by:Eaton Corporation based inCleveland, OHIO (USA)
The XT IEC series includes non-reversing and reversing contactors and starters as well as overload relays and accessories. Enclosed control options include metallic and non metallic enclosures with circuit breakers, and North American or European fuses. The XT line of IEC motor control is not the same as traditional motor control designs. XT was designed to be engineered better. ...
Manufactured by:General Cable based inLawrenceburg, KENTUCKY (USA)
For proven solutions that meet specific substation power requirements, General Cable offers electric utility cables that include TransPowr® ACSR, AAC and 1350-0 bare overhead transmission conductors, bare copper and Dead Soft Annealed Copper Clad Steel (DSA CCS) grounding conductors, and PowrNet® 600 V secondary network ...
Manufactured by:Hammond Power Solutions based inGuelph, ONTARIO (CANADA)
HPS Millennium™ E medium voltage transformers are renowned within the industry for their exceptional quality and service reliability, a standard that Hammond Power Solutions is known for. These transformers come with three-phase ratings up to 15 MVA, 34.5 kV, and 175 kV BIL, as well as single-phase options up to 5 MVA, incorporating the latest advancements in technology and manufacturing ...
Manufactured by:Eaton Corporation based inCleveland, OHIO (USA)
The PXG 200E is designed as a data acquisition tool for serially communicating energy meters via its embedded Web server or connect to Ethernet-based applications such as enterprise energy management, demand response and smart grid programs. By connecting electric meters and water, air, gas, electric (pulse) and steam meters through the Eaton Digital Input Module to the PXG 200E, you can collect ...
Manufactured by:General Cable based inLawrenceburg, KENTUCKY (USA)
General Cable is a recognized leader in the design and manufacture of cables for power generation from fossil fuels including natural gas, oil and coal to nuclear, wind, solar, hydro, biomass or tidal. To compete in today’s cost-driven and deregulated marketplace, companies designing, building and equipping power-generation facilities can benefit from a single source for high-quality ...