- Home
- Equipment
- east timor
- power monitoring system
Refine by
Power Monitoring System Equipment & Supplies In East Timor
161 equipment items found
by:DIgSilent GmbH based inGomaringen, GERMANY
The Power System Monitoring PFM300 is a multifunctional Dynamic System Monitor which fully integrates with DIgSILENT PowerFactory software. PFM300 features grid and plant monitoring, fault recording, power quality and grid characteristics analysis. It provides easy access to ...
Manufactured by:KONČAR - Electrical Engineering Institute Ltd. based inZagreb, CROATIA
Torque, speed and power are the defining mechanical parameters associated with functional performance of rotating machines (machine efficiency determination). ST&P system enables insight into this important machine parameters by on line measurement of shaft twist angle. The system uses two precise optical fork sensors for twist angle measurement. Besides on-line torque measurement, ST&P ...
Manufactured by:Extreme Endeavors and Consulting LLC based inPhilippi, WEST VIRGINIA (USA)
Cloud/IoT - 3 Phase Power Monitoring Solution. Visualize your Power Consumption and Quality. Connect the IPAC 3P C , Register on our website and start logging data, its that ...
Manufactured by:Extreme Endeavors and Consulting LLC based inPhilippi, WEST VIRGINIA (USA)
IoT 3 Phase Power Monitoring Solution for SCADA and Motor Control Applications. Key elements of any SCADA system. Simple network commands with driver ...
Manufactured by:Yingkou Tiancheng Fire Fighting Equipment Co. Ltd based inXishi District, CHINA
The monitoring module uses dot matrix liquid crystal display information to be intuitive, easy to operate and easy to use. The address code is electronically encoded and can be written in advance by the electronic encoder. The engineering debugging is simple and reliable. Monitor the operation status by the low-power CPU, and transfer the status ...
Manufactured by:Socomec Group based inBenfeld, FRANCE
The DIRIS Digiware BCM is a multi-circuit current measurement module with 18 or 21 integrated sensors and allows the monitoring of all types of power distribution units (PDUs). These modules are also equipped with three RJ12 channels allowing them to be connected to TE/TR/iTR/TF current sensors using RJ12 cables and various ΔIC differential ...
Manufactured by:eze System, Inc. based inFolsom, CALIFORNIA (USA)
This split-core current transducer by eze System, Inc. is an efficient tool for monitoring AC electric currents by producing a proportional DC voltage output. Designed to encircle wires up to 7.5mm in diameter, it serves practical applications such as determining load status, assessing runtime, or detecting broken light bulbs. ...
Manufactured by:M.A.E. Srl based inFrosolone (IS), ITALY
Specially studied kit to power monitoring system when there is no electric network or as buffer battery to secure the operating of monitoring station. Solar panel together with the high yield of regulator of charge and the high quality of batteries allows to keep the level of charge at its best also in bad environment conditions. ...
Manufactured by:HT Italia S.r.L. based inFaenza (RA), ITALY
Self-Powered phase sequence measuring device. HT82 is a mobile device to display the phase sequence with 3 terminals in a generic three-phase system. The device provides an “R” indication in case of correct phase sequence or “L” indication in case of incorrect phase sequence. ...
Manufactured by:Link4 Corporation based inAnaheim, CALIFORNIA (USA)
The ADISM sensor gives you monitoring control with a differential pressure to provide accurate readings for temperature and humidity. Its intuitive programming allows for easy setup and even easier use on a day-to-day basis. The ADISM is a powerful companion tool to monitor and control your ...
Manufactured by:Chongqing Blue Jay Technology Co.,Ltd based inChongqing, CHINA
ALM-CH16 fault annunciator are installed on the cabinet panel. They are simple, compact and can improve wiring efficiency. They are universal alarms suitable for power control and monitoring systems. The alarm uses a highly reliable MCU to monitor external status in real time. When an abnormality occurs, the corresponding ...
Manufactured by:RLE Technologies based inFort Collins, COLORADO (USA)
The RLE’s power fail monitor (PFM) monitors any standard outlet and provides early warning that power has been ...
Manufactured by:PEO B.V. based inWijchen, NETHERLANDS
For most position measurement applications the SiTek SEEPOS system offers a complete and easy-to-use solution. High speed PSD electronics combined with digital signal processing and high speed USB data transfer gives a powerful measurement system. With its large dynamic range it can handle light powers from nW to mW from DC light sources as well as modulated light sources. All parameters, such as ...
Manufactured by:Binsfeld Engineering Inc based inMaple City, MICHIGAN (USA)
The TorqueTrak Revolution Series is a torque and power monitoring and control system that features inductive (non-contact) power and data transfer for continuous operation. Designed for applications that require ongoing measurement of torque and/or horsepower the TorqueTrak Revolution system is custom-machined to ...
Manufactured by:Zhuhai Pilot Technology Co., Ltd. (Pilot) based inZhuhai, CHINA
SPM20 is specially design for Hotel, Hospital, Dormitory, Comercial Building and other applications. It can calculating power consumption, measuring AC device electricity. It is the smallest AC Max. 30 channel energy ...
Manufactured by:Excelitas Technologies based inWaltham, MASSACHUSETTS (USA)
For applications requiring light output monitoring or feedback loops to maintain consistent intensity, X-Cite offers a range of light measurement solutions that can be incorporated into any illumination system. The stand-alone X-Cite Power Measurement System can measure output from lamps, LEDs, or lasers with the ability to ...
Manufactured by:Camille Bauer Metrawatt AG based inWohlen, SWITZERLAND
The SIRAX BT5300 is a top-hat rail mounted Transducer and used to measure and convert frequency input into an proportional DC current or voltage output signal. Input frequency and Output Voltage/Current is displayed on LCD and indicated by ...
Manufactured by:Elspec LTD based inCaesarea, ISRAEL
By continuously detecting and recording all waveform signals, it ensures that no crucial data is lost, and it's capable of retaining comprehensive records for over a year. Designed for rigorous EMS and power quality applications, it offers superior trends resolution and captures up to 5,000 power parameters at variable cycle intervals. Its dual FFT engines ...
Manufactured by:VPInstruments based inDelft, NETHERLANDS
A LED indicator is available which tells you that the minimum voltage (12VDC) is met. A clean and easy way to create your daisy chain. Perfect in combination with VPFlowScopes, power meters, and building monitoring system ...
Manufactured by:Camille Bauer Metrawatt AG based inWohlen, SWITZERLAND
The SIRAX BT5200 is a top-hat rail mounted Transducer and used to measure and convert AC Current input into an proportional DC current or voltage output signal. Input Current and Output Voltage/Current is displayed on LCD and indicated by ...