- Home
- Equipment
- north america
- powerful statistics and data monitoring tools
Refine by
Powerful Statistics And Data Monitoring Tools Equipment Supplied In North America
88 equipment items found
Manufactured by:MSS, Inc. based inNashville, TENNESSEE (USA)
Take full advantage of Vivid AI’s powerful statistics and data monitoring tools for incoming and outgoing material streams in your recycling facility. Powered by Recycleye, driven by Recycleye Vision, a ground-breaking AI technology that is as powerful as a human ...
Manufactured by:HT Italia S.r.L. based inFaenza (RA), ITALY
Self-Powered phase sequence measuring device. HT82 is a mobile device to display the phase sequence with 3 terminals in a generic three-phase system. The device provides an “R” indication in case of correct phase sequence or “L” indication in case of incorrect phase sequence. ...
Manufactured by:Link4 Corporation based inAnaheim, CALIFORNIA (USA)
The ADISM sensor gives you monitoring control with a differential pressure to provide accurate readings for temperature and humidity. Its intuitive programming allows for easy setup and even easier use on a day-to-day basis. The ADISM is a powerful companion tool to monitor and control your ...
Manufactured by:RLE Technologies based inFort Collins, COLORADO (USA)
The RLE’s power fail monitor (PFM) monitors any standard outlet and provides early warning that power has been ...
Manufactured by:Binsfeld Engineering Inc based inMaple City, MICHIGAN (USA)
The TorqueTrak Revolution Series is a torque and power monitoring and control system that features inductive (non-contact) power and data transfer for continuous operation. Designed for applications that require ongoing measurement of torque and/or horsepower the TorqueTrak Revolution system is custom-machined to install on existing shafting up to 40 inches (1016 mm) in diameter. Machine ...
Manufactured by:Excelitas Technologies based inWaltham, MASSACHUSETTS (USA)
For applications requiring light output monitoring or feedback loops to maintain consistent intensity, X-Cite offers a range of light measurement solutions that can be incorporated into any illumination system. The stand-alone X-Cite Power Measurement System can measure output from lamps, LEDs, or lasers with the ability to record through ...
Manufactured by:Phocos Americas, Inc. based inTucson, ARIZONA (USA)
With innovative maximum-power-tracking technology, Phocos‘ MPP-Tracker ensures maximum performance from your solar array at all times and in all weather conditions.The MPPT can yield an energy gain from your PV array (up to 30%). When a Central Unit is used, up to 8 MPPTs can be used together in one system. The charge regulation is then done via data bus by the Central Unit. This will ...
Manufactured by:Camille Bauer Metrawatt AG based inWohlen, SWITZERLAND
The SIRAX BT5300 is a top-hat rail mounted Transducer and used to measure and convert frequency input into an proportional DC current or voltage output signal. Input frequency and Output Voltage/Current is displayed on LCD and indicated by ...
Manufactured by:VPInstruments based inDelft, NETHERLANDS
Easy and proper Modbus wiring with VPInstruments Modbus Junction Box. You can create a daisy chain for your instrumentation like VPFlowScopes clean and without mixing up the wires. The terminal inside offers straight forward and rugged connection. The Modbus junction box also includes termination and biasing for the RS485 connection. A LED indicator is available which tells you that the minimum ...
Manufactured by:Camille Bauer Metrawatt AG based inWohlen, SWITZERLAND
The SIRAX BT5200 is a top-hat rail mounted Transducer and used to measure and convert AC Current input into an proportional DC current or voltage output signal. Input Current and Output Voltage/Current is displayed on LCD and indicated by ...
Manufactured by:Bonitron based inNashville, TENNESSEE (USA)
Bonitron Sag UPD (Uninterruptible Power for Drives) Solutions are the cost effective way to make sure your critical process never sees power disturbances from voltage sags. While some applications experience complete power outages, in most parts of the world sags are the most common culprit of process power ...
Manufactured by:Verivolt LLC based inSan Francisco, CALIFORNIA (USA)
Verivolt Encore is designed to perform a 4 wire current measurement. Particular attention was paid on providing a solution that minimizes cost and improves overall performance on distributed systems such as substations, building monitoring, power distribution systems, etc. The Encore C series covers the ranges of ±1mA, ±2mA, ±3mA, ±5mA, ±100mA, ±200mA, ...
Manufactured by:Camille Bauer Metrawatt AG based inWohlen, SWITZERLAND
The SIRAX BT5400 is used to measure and convert Active, Apparent, Reactive Power, Phase Angle & Power Factor of a Single phase or Three phase AC System with balanced or unbalanced load into an proportional DC current or voltage output ...
Manufactured by:Chatsworth Products (CPI) based inAgoura Hills, CALIFORNIA (USA)
Basic eConnect PDUs provide reliable power distribution in high-density applications where no power monitoring is ...
Manufactured by:Camille Bauer Metrawatt AG based inWohlen, SWITZERLAND
The SIRAX BT5100 is a top-hat rail mounted Transducer and used to measure and convert AC Voltage input into an proportional DC current or voltage output signal. Input Voltage and Output Voltage/Current is displayed on LCD and indicated by ...
Manufactured by:Camille Bauer Metrawatt AG based inWohlen, SWITZERLAND
The SIRAX BT5400 is used to measure and convert Active, Apparent, Reactive Power, Phase Angle & Power Factor of a Single phase or Three phase AC System with balanced or unbalanced load into an proportional DC current or voltage output ...
Manufactured by:Trumeter Technologies Ltd based inCoconut Creek, FLORIDA (USA)
A universal power meter for single, split and 3-phase applications. This panel-mounted power meter is designed for use on mains circuits, potential transformers and current transformers. Its multi-measurement capability of active and reactive power makes it ideal for a wide range of power monitoring applications and one of the most flexible power meters for electrical ...
Manufactured by:Camille Bauer Metrawatt AG based inWohlen, SWITZERLAND
SINEAX DM5S and SINEAX DM5F are free-programmable universal measurement devices for heavy-current systems: Classical high-accuracy transducer, suited for monitoring tasks and retrofit applications in energy distribution and ...
Manufactured by:Camille Bauer Metrawatt AG based inWohlen, SWITZERLAND
The MAVOSYS 10 opens up entirely new possibilities for monitoring mains quality, power and energy: It's the first mains analyzer with more than 8 channels, it can be configured in a modular fashion and it provides an ideal, cost-saving solution for all requirements. In combination with an optional ¼ VGA touch-screen, the multiuser web interface from Encore series software and special ...
Manufactured by:Techna-Tool Inc. based inHartland, WISCONSIN (USA)
An ultra-fast and precise measurement transducer specifically developed for Machine Tool Monitoring applications. The PWM3110T is a unique design based on the fastest available 32 bit Microcontroller and 18 bit successive approximation AD Converters. A sampling rate of 150kHz ensure precise and correct measurement even when used with Frequency Inverters with 20kHz PWM base frequencies and ...