Refine by
Sensors With Voltage Equipment & Supplies
82 equipment items found
Manufactured by:Philtec, Inc. based inAnnapolis, MARYLAND (USA)
Standard single channel units include amplifier and sensor tip with 914 mm (3 Feet) long fiberoptic cable, require +12 VDC input power, and provide 0 to +5 volt analog output with DC - 20 KHz ...
Premium
Manufactured by:Innovative Sensor Technology (IST) AG - an EndressHauser Company based inEbnat-Kappel, SWITZERLAND
Voltage regulator: None - Signal direction: Positive only (+). The Senstech signal amplifier simplifies the evaluation of the sensor signals and makes them less sensitive to interference. The gain is matched to the measuring range of the sensors – either in positive load direction or in both directions, depending on the variant. The ...
Manufactured by:Cropscan, Inc. based inRochester, MINNESOTA (USA)
MSR5, MSR87 or MSR16R-to-DLC Cable Attachment Box. Connector Jacks for Six External Sensors (DC voltage output type sensors, one on front panel, five on ...
by:HEX20 based inAdelaide, AUSTRALIA
These include maximum peak power tracking for solar arrays, battery charging management both onboard and externally, voltage regulation, and effective power distribution. Enhanced data acquisition capabilities ensure precise monitoring and analysis of power parameters. Key features of the EPS board include 3.3V, 6V, and 12V voltage regulators, a launch vehicle ...
Manufactured by:AKCP based inDin Daeng, THAILAND
The AC voltage sensor is used to indicate the presence or absence of line voltage; The AC Voltage Detector indicates an ALARM/NORMAL condition in software and also via an LED mounted on the ...
Manufactured by:Endress+Hauser Group Services AG based inReinach, SWITZERLAND
Power supply for one 4 wire sensor or transmitter. The power supply has one output for supplying voltage to 4 wire sensors and transmitters. Connection to mono-phased a.c. networks or to two phase conductors of three-phase supply networks (TN-, TT- or IT-networks as per VDE 0100 T 300/IEC 364-3) with 100-240 V AC nominal voltage ...
Manufactured by:QS Lasers UAB based inVilnius, LITHUANIA
LDTC100A Series High Power Laser Diode Drivers are designed specifically for an OEM market. High performance current source is designed specifically for controlling and testing high power laser diodes. This model offers maximum current range from 10 to 100AQCW with maximum compliance voltages from 3.3 to 32 V. For virtual instrument programming, LabView ® instrument drivers are available free ...
Manufactured by:Endress+Hauser Group Services AG based inReinach, SWITZERLAND
Power supply for two 2 wire sensors or transmitters. The power supply has two galvanically isolated outputs for supplying voltage to sensors and transmitters. A built-in communication resistance enables bidirectional HART® communication with SMART sensors and ...
Manufactured by:Whelen Engineering Company, Inc. based inChester, CONNECTICUT (USA)
Featuring?the greatest configurability, speed, and expansion?yet,?CenCom?Core is a system created to enhance officer safety with advanced automation and remote ...
Manufactured by:Precision Measurement Engineering, Inc. (PME) based inVista, CALIFORNIA (USA)
The C-FLUOR Logger connects to one Turner Designs C-FLUOR sensor. The logger records measurements internally at a variety of possible sample rates. Data are offloaded from the logger to a computer via a standard USB cable. The logger is completely self-contained and waterproof. Internal power allows the logger to operate for roughly 200,000 ...
Manufactured by:Jacarta Ltd. based inMarlborough, UNITED KINGDOM
The power sensor can be connected to a mains power socket to monitor for power failure. We recommend that the interSeptor, interSeptor Pro or PowerFox8 are supplied by a UPS and this sensor connected to a non-UPS mains power socket. The Voltage Sensor can be used to monitor spare power outlets for outages and interruptions. As ...
Manufactured by:J. Schneider Elektrotechnik GmbH based inOffenburg, GERMANY
The accumulator buffered DC supply works according to the standby parallel principle and guarantees, in connection with a lead accumulator and for a certain amount of time, a safe backup operation of the DC supply in case of a mains failure. The overall output current is split up between consumer supply and lead accumulator charge. The power supply is characterized by the following ...
Manufactured by:Genn Controls India Private Limited based inCoimbatore, INDIA
ULTRA VOILET + ULTRA SOUND OPTIONS. Fully True color RGB Tri-chromatic CCD Camera Technology. High speed scanning with subtle spots of 0.014mm. High definition UV spectral CCD color camera. Double side camera for excellent performance in process. Advanced snap hot image capturing. 4th generation FPGA+DSP processing system. High range direct viewing Ultrasonic Zone. Modular and dust proof system. ...
Manufactured by:Enviromon.net based inWindsor, ONTARIO (CANADA)
Our AC voltage detection sensors are used to indicate the presence or absence of AC line voltage. This is useful, for example to tell when the UPS is running on battery power. It indicates an ALARM/NORMAL condition in software and also via an LED mounted on the sensor. SNMP traps and sensor polling available ...
Manufactured by:Greenwood-Power GmbH based inDenver, COLORADO (USA)
The VxxxC-xx voltage sensor is engineered for integration into T-connectors, typically replacing blind plugs to offer dual functionality: securing the connector and enabling precise voltage measurement. Designed to meet EN 50181 standards, it is compatible with a range of T-connectors from various manufacturers. The sensor's ...
Manufactured by:Micro Grow Greenhouse Systems Inc. based inTemecula, CALIFORNIA (USA)
DIF settings, separate day and night temperature control, and manual override switches are standard features. Low voltage 24 VAC operation. Sensors sold separately. ...
Manufactured by:PEC based inLeuven, BELGIUM
The ACT0505 is a 10-Channel cell Tester, ideal for testing and evaluating cells and batteries according to IEC285. This test equipment can be used in several areas, from Research & Development to Formation and Ranking, and from production Quality Control to Incoming Goods ...
Manufactured by:PEC based inLeuven, BELGIUM
The CT0550 is a 80-Channel Battery Tester, ideal for testing and evaluating cells. This test equipment is used for high volume testing such as repetitive cycling, incoming goods inspection and ...
Manufactured by:Enviromon.net based inWindsor, ONTARIO (CANADA)
The DC Digital Voltmeter is used to indicate the presence or absence of DC line voltage. Readings are available in both an absolute value and a percentage of full scale. Full scale is user programmable with both the base and top voltage from -60 to 0 or 0 to 60 ...
Manufactured by:Lindsey Systems based inAzusa, CALIFORNIA (USA)
Lindsey Systems’ line of ElbowSense™ voltage sensors are now available in a 0.3% metering accuracy version. ElbowSense voltage sensors are available in standard IEEE Std 386 200A elbow and tee-body configurations, and as a voltage plug for 600A cable installations. See our ElbowSense ...