Refine by
Vapors Equipment Supplied In Russia
18 equipment items found
Manufactured by:Aereon, part of Cimarron group based inLegnano (MI), ITALY
AEREON offers our own WILDCAT natural gas compression systems for wellhead applications as rental or lease equipment. Through testing, we can identify flow improvement up front and determine the appropriate standard system for your gas compression and budgetary needs. AEREON's gas compression systems have been used successfully for many years. Systems installed on coal bed methane wells, gas ...
Manufactured by:Aereon, part of Cimarron group based inLegnano (MI), ITALY
With the roll out of Quad O regulations in the USA, crude/condensate tank batteries and well pads are required to conform to reduced emission levels if they have the potential to emit over 6 tons of VOC per annum. One of the three emission control end-of-line devices can be used: Flares, Enclosed Combustors or ...
Manufactured by:Rehm Thermal Systems GmbH based inBlaubeuren-Seissen, GERMANY
Vision TripleX: a patented new development in the field of convection and vapor phase soldering. The system is based on the reflow convection soldering systems in the Vision series and combines the convection soldering process with the proven vapor phase soldering process of the Condenso series. Thus, three processes can be carried out in the Vision TripleX: ...
Manufactured by:PBS Velká Bíteš, a.s. based inVelká Bíteš, CZECH REPUBLIC
Cryogenic compressors are designed for compressing inert ...
Manufactured by:Plazarium GmbH based inBerlin, GERMANY
Low-temperature plasma. Basic concepts, properties, application. Plasma is the quasineutral gas of charged and neutral particles, the concentration of which is sufficient to ensure that the space charge created by them limits their ...
Manufactured by:Technokomplex based inRostov-on-Don, RUSSIA
KVARK-500 drum furnace for gas-vapour activation of carbon-containing residue is able to process not only pyrolysis products, but carbonize products like brown coal, bituminous coal, anthracite, peat, wood, vegetation wastes (walnut, coconut and other shells, fruit tree pits, rice husk, etc.). As a result active coals of different sorption properties for different application fields are ...
Premium
Manufactured by:Inciner8 Limited based inSouthport, UNITED KINGDOM
ORC technology is based on the widely known and proven Rankine Cycle principle. It was named after William John Macquorn Rankine, a Scottish polymath and Glasgow University professor. The Rankine cycle is a cycle that converts heat into energy. The heat is supplied externally to a closed ...
Manufactured by:GIG Karasek GmbH based inGloggnitz, AUSTRIA
The thermal vapor recompression (TVR) builds on the same principle as the mechanical alternative, but uses only a portion of the resulting vapor for heating the system. The compression of the steam for heat recovery takes place in a steam jet pump. This is usually designed for a specific operating point and works on the jet pump principle. A certain amount of ...
Manufactured by:Aereon, part of Cimarron group based inLegnano (MI), ITALY
Whenever a process requires that entrained droplets be removed from a vapor stream, a knockout drum should be integrated into the system. Condensation can occur when hot process gases cool considerably in the flare gas header and riser, and some gases also go to dew point at ambient temperatures and pressures and can therefore generate liquids. ...
Manufactured by:Aereon, part of Cimarron group based inLegnano (MI), ITALY
One of the three emission control end-of-line devices can be used: Flares, Enclosed Combustors or VRUs. When enclosed flames and smokeless combustion are required for low pressure tank vapors, or other VOC destruction applications, AEREON's GHOST series of standard design enclosed combustors provides EPA-Certified performance, full stainless steel construction, and an economical ...
Manufactured by:Aereon, part of Cimarron group based inLegnano (MI), ITALY
Often coupled with a pit liner, our pit flares can be a cost-effective combustion option for an environmentally conscious user. Our high efficiency burner produces a mixture of vapor and liquid from a single source. While most often designed to operate nonsmokeless, through use of AEREON's various Pit Flare technologies (Chimera, Peackock, Triton), smokeless operation can often ...
Manufactured by:Aereon, part of Cimarron group based inLegnano (MI), ITALY
The Certified Ultra-Low Emissions Burner (CEB) is an ultra-low emissions vapor device that utilizes premix surface combustion to effectively combust waste gases in a compact footprint. With VOC destruction efficiencies of up to 99.99% and a NOx emissions guarantee of ≤ 15 ppmv at 3% oxygen, carbon monoxide emissions guarantee of, smokeless operation and no luminous flame, the ...
Manufactured by:CS Combustion Solutions GmbH based inWien, AUSTRIA
This burner works with oxygen instead of air. After commissioning with a support fuel such as natural gas or heating oil, this burner works with almost any combustible fuel. This process can be retrofitted without having to install a new burner block in the existing combustion chamber. With the special PreCOMB muffle system, it is possible to run additional fuel ...
Manufactured by:Aereon, part of Cimarron group based inLegnano (MI), ITALY
The Model 100 Continuum Ignitor utilizes a high voltage electric arc to ignite a combustible air/gas mixture. This arc typically occurs every 20 seconds for a two second duration (timing is adjustable). The Continuum provides a spark inside a ‘slipstream’ chamber that diverts a portion of the waste gas to create a combustible air/gas mixture. This allows the Continuum ignitor to ...
Manufactured by:Aereon, part of Cimarron group based inLegnano (MI), ITALY
Utility flares are one of the most common and basic flare systems. Utility flares are employed in applications which do not require smokeless burning or in applications where smokeless flaring can be achieved without the use of an additional assist medium (I.e. For burning of lighter gases). Utility flares therefore, do not require auxiliary gas streams or assist air; two mediums normally used to ...
Manufactured by:Aereon, part of Cimarron group based inLegnano (MI), ITALY
AEREON's Inferno Series Gas-assisted flares are flares that use an additional source of high pressure gas at the flare tip to mix with the waste gas and create additional turbulence to ensure adequate mixing with air, which in turn provides for smokeless combustion. The waste gas is further distributed at the flare tip through AEREON's proprietary Starfire burner, optimizing gas and air mixing. ...
Manufactured by:CS Combustion Solutions GmbH based inWien, AUSTRIA
CS Combustion Solutions offers an optimized design of combustion chambers for each application. For each application, each combustor is tailor-made designed, calculated and manufactured to meet the specific challenges and technical characteristics. For sulphuric acid production, SO2 production or waste acid regeneration, combustion chambers with high steel shell temperatures up to 400°C are ...
Manufactured by:Aereon, part of Cimarron group based inLegnano (MI), ITALY
AEREON's Cyclone Series Air-assisted flares are comprised of two risers (waste gas and air) and a blower system that provides supplemental combustion air. Air is fed by the blower into the air riser, to eventually combine with the process gas, which passes through its own secondary riser and is distributed at the flare tip through a proprietary AEREON Starfire burner tip. Upon mixing at the flare ...