Refine by
Waste Heat Equipment Supplied In Africa
20 equipment items found
Distributed by:Cannon Bono Energia S.p.A. - part of the Cannon Group based inPeschiera Borromeo, ITALY
Cannon Bono Energia’s range of waste heat recovery steam generators are used for steam production or energy generation utilising the waste heat from gas turbines, medium speed diesel engines or recovering the waste heat of some industrial ...
Manufactured by:Forbes Marshall based inPune, INDIA
Forbes Marshall Exhaust Gas/ Waste Heat Recovery Boilers (WHRB) or Exhaust Gas Boilers are fully packaged smoke tube industrial boilers equipped with advanced instrumentation to deliver maximum possible heat recovery. These boilers are ideal to recover heat from gen sets, incinerators, blast furnace exhausts etc. They ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
Approximately 25% of the usable energy of the fuel gas is released in the exhaust of the gas engine. This can be captured for cogeneration in a combined heat and power plant. This heat exits the engine at ~450oC as ‘high grade heat’, contrasting to ‘low-grade heat’ available from the generator cooling ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
Exhaust gas heat exchangers (EGHE) utilise waste heat from the exhaust of the GE's Jenbacher gas engine cogeneration plant. They are typically located adjacent to the engine or are mounted on the roof of a containerised combined heat and power unit. ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
Absorption chillers can be used to deliver a trigeneration solution for a combined heat and power plant. Absorption chillers produce chilled water by heating two different substances that are in thermal equilibrium to separation, then reuniting them through heat removal. An example of two substances that may be used for this process is water and lithium bromide. Absorption chillers can be ...
Premium
Manufactured by:Anguil Environmental Systems, Inc. based inMilwaukee, WISCONSIN (USA)
Every energy demand is unique, as is every energy-efficiency improvement opportunity. At Anguil, our track record includes an ability to blend time-tested, standard products with innovative, custom engineered solutions. We design, manufacture, and install energy recovery systems that decrease your energy consumption, reduce operating costs and maximize return on ...
Manufactured by:Inciner8 Limited based inSouthport, UNITED KINGDOM
Get something back from your waste with our innovative range of heat exchange modules. Inciner8 have found the optimal way to convert energy from waste and make it usable whether you need it for washing, disinfection, heating, or for your technological process. Inciner8's unique, patented air heat exchangers are ...
Manufactured by:ANDRITZ Separation - ANDRITZ Group based inGraz, AUSTRIA
Paddle, belt, fluid bed, or drum? ATEX/NFPA, Class A, or low-grade waste heat? Whatever your preferences and requirements, ANDRITZ offers the industry’s widest range of safe and efficient drying solutions – all tried and proven in the world’s largest and most complex plants. Choosing from one of the world's most comprehensive product portfolios in drying ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
When a unit is in a genset configuration the engine, alternator and other supporting items are located on a skid. Waste heat from the engine would be dissipated in the exhaust gas and via an engine cooling circuit linked to heat dump ...
Manufactured by:Addfield Environmental Systems Limited based inStaffordshire, UNITED KINGDOM
A 71Kw-350kw thermal heat recovery unit, capable of converting waste heat from an incineration or cremation cycle into energy. The heat exchanger functions by pulling in waste heat from the machine’s chimney stack. Dilution air is used to cool the gases, prior to entering the recuperator. ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
In those areas not serviced by a main electricity grid, locally generated electricity is ideally suited as a cost-effective way of meeting the local electricity demand while reducing significant network installation or upgrade costs. Through supply of energy directly at the load with a captive power plant, it is also possible to reduce or avoid altogether the transport and distribution losses. ...
Manufactured by:Inciner8 Limited based inSouthport, UNITED KINGDOM
Get something back from your waste with our innovative range of heat exchange modules. Inciner8 have found the optimal way to convert energy from waste and make it usable whether you need it for washing, disinfection, heating, or for your technological ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
Cogeneration (cogen) through combined heat and power (CHP) is the simultaneous production of electricity with the recovery and utilisation heat. Cogeneration is a highly efficient form of energy conversion and it can achieve primary energy savings of approximately 40% by compared to the separate purchase of electricity from the national electricity grid and a gas boiler for onsite heating. ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
Combined heat and power (CHP) or cogeneration has significant potential in the diary industry. Electricity and heat recovered from a gas engine captive power plant can be deployed for useful onsite us. Converting the heat into cooling via absorption chillers is called combined cooling heat and power or trigeneration, and can be deployed to support the dairy’s cooling ...
Manufactured by:Dürr Systems, Inc. based inDe Pere, WISCONSIN (USA)
In order to dispose of critical exhaust gases and liquid residues safely and completely in the face of increasingly stringent thresholds, systems based on a combination of different technologies are needed. The Oxi.X DF incinerator for exhaust gases and liquid residues is the ideal solution in these situations. This type of system can also dispose of explosive exhaust gases without problem. It is ...
Manufactured by:Evapco Inc. based inWestminster, MARYLAND (USA)
The Evapcold packaged chiller product line consists of 50 models. Each is completely self-contained and has a very low ammonia charge of less than 1.0 lb per TR. Evapcold units come with several optional features and accessories that make them a truly innovative solution for your refrigeration needs. The chiller provides a chilled secondary fluid (glycol) to the refrigeration load, which ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
Associated petroleum gas (APG) is also known as flare gas. APG can be converted to power at high efficiency utilising GE Energy’s Jenbacher gas engine. This power can be used for the provision of electricity and heating on-site whilst eliminating the cost of diesel deliveries to remote areas. The utilisation of APG as a fuel for a generator is an excellent way of reducing carbon dioxide ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
The spent byproducts of distilleries have historically been treated as waste. However, the liquid and solid wastes of the distillation industry have greater potential and can be sent to anaerobic digesters and converted into biogas. This biogas in turn can be turned into renewable electricity at high efficiency via GE Jenbacher gas ...
Manufactured by:Perry of Oakley Ltd based inDunkeswell, UNITED KINGDOM
The Perry Belt Drier is ideally suited to drying almost any non-flowing product or more granular products that require a lower throughput capacity. Popular applications have included biomass, anaerobic digestate, grass & ...
Manufactured by:Saubatech (Pty) Limited based inNorthriding, SOUTH AFRICA
MACRO burn Incinerators are your solution to most waste management problems involving solid, liquid or gaseous waste. Simple design and few mechanical parts combine to produce the overall appeal and reliability that MACROburn ...