Refine by
Energy Equipment Supplied In Botswana
69 equipment items found
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
The L030R02 model of the Piccolo series has been specially designed for modern switchgear with small gas compartments. Due to its compact construction this device fits conveniently onto a euro pallet for transport and is easily manoeuvrable even in the very narrow passage ways of gas insulated switchgear. The device is operated via a 3.5” colour touch panel where icons are clearly displayed ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
For reliable continuous cooling. The essential advantage of our refrigeration units is that the cooling is carried out by means of water outside the transformer. This is to prevent the transformer from being damaged if leaks occur. The cooling systems can be connected to the gas insulated transformer directly and are optimally suited for continuous ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
Long service intervals, maintenance-friendly engine design and low fuel consumption ensure maximum efficiency in GE Energy’s type 3 engines. Optimised engine components prolonging service, life even when using non-pipeline gases such as landfill gas. The Type-3 stands out in its 500 to 1,100 kWe power range due to its technical maturity and high degree of ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
As the only gas engine specialist offering small and large engines, GE is introducing the innovative J920 9.5MWesystem. Whether you are seeking full power at high efficiency levels or a unit capable of short start-up times, GE’s J920 Jenbacher gas engine is your ideal solution for reliable lasting power and grid stabilisation with a low carbon ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
A GE's Jenbacher genset is configured to produce electrical power only, which the Jenbacher unit does at high efficiency. When a unit is in a genset configuration the engine, alternator and other supporting items are located on a skid. Waste heat from the engine would be dissipated in the exhaust gas and via an engine cooling circuit linked to heat dump ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
The GE Jenbacher container is a high quality unit which can be deployed where economical and speedy installation is required. The GE Jenbacher containers are fully tested when they leave the production facility and are excellent for plug-and-play applications. The overall compact design ensures a space saving installation with service-orientated ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
Gas engines are well suited to acting in island mode operation as a captive power plant. Island mode operation relates to those power plants that operate in isolation from the national or local electricity distribution ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
Fuel gas boosters or blowers are used to raise the pressure of fuel gas to the operating level of the gas engine or combined heat and power plant. Gas boosters are often required for biological gas applications where the pressure level of the biogas holder is below ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
Combined heat and power (CHP), or cogeneration, offers a range of potential benefits for commercial applications. Cogeneration systems are successfully applied in a range of different applications including office buildings, airports and retail ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
Gas engines based cogeneration, or combined heat and power (CHP), offers a range of potential benefits to industrial applications. Gas engine cogeneration systems can provide significant financial savings on fuel costs used to provide electricity and heat. In some countries the government provides tax benefits to the owner of combined heat and power ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
Electricity peaking stations, also called peak-lopping plants, are power plants designed to help balance the fluctuating power requirements of the electricity grid. Clarke Energy is able to offer a range of rapid response gas-fuelled power stations. These plants are ideally suited to peaking reserve, power and grid support ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
Disposal and treatment of biological waste represent a major challenge for the waste industry. For a wide range of organic substances from agriculture, foodstuff of feed industries, anaerobic digestion is a superior alternative to composting. Biogas – a mixture of both methane and carbon dioxide – is created during anaerobic digestion and serves as a high-energy renewable fuel that ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
Associated petroleum gas (APG) is also known as flare gas. APG can be converted to power at high efficiency utilising GE Energy’s Jenbacher gas engine. This power can be used for the provision of electricity and heating on-site whilst eliminating the cost of diesel deliveries to remote areas. The utilisation of APG as a fuel for a generator is an excellent way of reducing carbon dioxide ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
High levels of power requirement and rising energy costs represent a major challenge for the steel industry. Gases created as a ‘free’ by-product during steel production processes serve as an attractive energy source option for efficient power generation. In addition to the economic benefit, using these gases as engine fuel reduced industrial CO2 emissions and saves natural energy ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
Clarke Energy is an authorised distributor and service provider for Techno Project Industriale’s (TPI’s) biogas upgrading plants. These include both membrane and selective solvent-based washing systems. With Clarke Energy’s engineering, procurement, construction and aftersales support capabilities we are able to offer full biogas upgrading solutions to our customers along with ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
Generate electricity and heat via a combined heat and power gas engine. Biogas is formed by the anaerobic decomposition of putrescible organic material. Biogas can either be used to generate electricity and heat via a combined heat and power gas engine, or can be cleaned to produce pure biomethane via biogas upgrading. Clarke Energy is a distributor of Jenbacher gas engines which are designed for ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
Combined heat and power (CHP) or cogeneration has significant potential in the data centre industry. Electricity and heat recovered from a gas engine captive power plant can be deployed for useful onsite us. Converting the heat into cooling via absorption chillers is called combined cooling heat and power or trigeneration, and can be deployed to support the cooling of data centre ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
Biomethane is as a green non-fossil source of energy. Biomethane is produced from biogas derived from organic matter (often from sewage, landfill, food waste or distillery waste) which makes it a renewable source of energy. Biogas can be dried and cleaned to remove impurities and upgraded to pure biomethane. Biomethane has a number of environmental benefits, the main one being that the methane ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
Waukesha 275GL+ represents the most advanced generation of high-horsepower engines in the gas compression segment. A combination of robust construction and innovative technology, the 275GL+ lean-burn engine delivers excellence in fuel flexibility, efficiency, power output and emissions for unmatched performance. For maximum uptime and profitability, you can depend on the 275GL+ to get the job ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
The Waukesha Series Four rich-burn engines are the engines of choice for the harshest and most demanding gas compression, power generation and mechanical drive applications. The engines can reliably produce more power on hot field gases, at high altitudes, and in remote locations, all while delivering low emissions when paired with a 3-way catalyst (non-selective catalytic ...