Refine by
Energy Equipment Supplied In Guinea
60 equipment items found
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
The Jenbacher Type-2 gas engine was introduced in 1974 and is the engine with the longest development history of the range. The 208 has 8 inline cylinders and is available at electrical output from 249kWe or 335kWe. The J208 is renowned for its robust design and highest levels of component durability. It is particularly well suited to troublesome gases such as landfill ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
Continuously refined on GE Jenbacher’s extensive experience, the GE Jenbacher type 6 engines are reliable, advanced products serving the 1.8 to 4.4 MW power range. It’s 1,500 rpm engine speed results in a high power density and low installation costs. The type 6 pre-combustion chamber achieves maximum efficiency with low emissions. Proven design and optimised components enable a ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
Absorption chillers can be used to deliver a trigeneration solution for a combined heat and power plant. Absorption chillers produce chilled water by heating two different substances that are in thermal equilibrium to separation, then reuniting them through heat removal. An example of two substances that may be used for this process is water and lithium bromide. Absorption chillers can be ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
Combined heat and power (CHP), or cogeneration, offers a range of potential benefits for residential applications. Cogeneration systems are successfully applied in a wide range of residential applications. Gas engine cogeneration systems can provide significant financial savings on fuel costs used to provide electricity and heat. In some countries the government provides tax benefits to the owner ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
The spent byproducts of distilleries have historically been treated as waste. However, the liquid and solid wastes of the distillation industry have greater potential and can be sent to anaerobic digesters and converted into biogas. This biogas in turn can be turned into renewable electricity at high efficiency via GE Jenbacher gas ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
Coal mine methane (CMM) is a type of gas present in active, working mine sites. This gas is extracted from the air in the coal mine helping improve safety and preventing uncontrolled release of methane to ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
Carbon Capture, Utilisation & Storage (CCUS) is the process of capturing CO2 from energy intensive processes before it enters atmosphere and finding a market use or transport to a storage facility (normally underground in geological caverns). Long-term storage of CO2 in a geological formation is still relatively new as a concept but will play a huge part in the net-zero efforts in the future. ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
Clarke Energy is a KOHLER company and distributes KOHLER generators in the South Pacific which are suitable for a wide range of applications. Our generators are designed and manufactured in the KOHLER facility in France with more than 50 years of product optimisation experience, available with a “plug-and-play” design philosophy for ease of installation. Dedicated KOHLER service and ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
Using a combined heat and power (CHP) or cogeneration plant in a hospital is an ideal way of achieving improved energy efficiency and reduced carbon emissions. Its utilisation helps a hospital’s limited financial resources go further. Natural gas is a clean-burning low carbon emission fuel. A CHP plant facilitates the high efficiency use of this fuel, by recovering not only electricity but ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
Long service intervals, maintenance-friendly engine design and low fuel consumption ensure maximum efficiency in GE Energy’s type 3 engines. Optimised engine components prolonging service, life even when using non-pipeline gases such as landfill gas. The Type-3 stands out in its 500 to 1,100 kWe power range due to its technical maturity and high degree of ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
As the only gas engine specialist offering small and large engines, GE is introducing the innovative J920 9.5MWesystem. Whether you are seeking full power at high efficiency levels or a unit capable of short start-up times, GE’s J920 Jenbacher gas engine is your ideal solution for reliable lasting power and grid stabilisation with a low carbon ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
A GE's Jenbacher genset is configured to produce electrical power only, which the Jenbacher unit does at high efficiency. When a unit is in a genset configuration the engine, alternator and other supporting items are located on a skid. Waste heat from the engine would be dissipated in the exhaust gas and via an engine cooling circuit linked to heat dump ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
The GE Jenbacher container is a high quality unit which can be deployed where economical and speedy installation is required. The GE Jenbacher containers are fully tested when they leave the production facility and are excellent for plug-and-play applications. The overall compact design ensures a space saving installation with service-orientated ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
Gas engines are well suited to acting in island mode operation as a captive power plant. Island mode operation relates to those power plants that operate in isolation from the national or local electricity distribution ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
Fuel gas boosters or blowers are used to raise the pressure of fuel gas to the operating level of the gas engine or combined heat and power plant. Gas boosters are often required for biological gas applications where the pressure level of the biogas holder is below ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
Combined heat and power (CHP), or cogeneration, offers a range of potential benefits for commercial applications. Cogeneration systems are successfully applied in a range of different applications including office buildings, airports and retail ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
Gas engines based cogeneration, or combined heat and power (CHP), offers a range of potential benefits to industrial applications. Gas engine cogeneration systems can provide significant financial savings on fuel costs used to provide electricity and heat. In some countries the government provides tax benefits to the owner of combined heat and power ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
Electricity peaking stations, also called peak-lopping plants, are power plants designed to help balance the fluctuating power requirements of the electricity grid. Clarke Energy is able to offer a range of rapid response gas-fuelled power stations. These plants are ideally suited to peaking reserve, power and grid support ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
Disposal and treatment of biological waste represent a major challenge for the waste industry. For a wide range of organic substances from agriculture, foodstuff of feed industries, anaerobic digestion is a superior alternative to composting. Biogas – a mixture of both methane and carbon dioxide – is created during anaerobic digestion and serves as a high-energy renewable fuel that ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
Associated petroleum gas (APG) is also known as flare gas. APG can be converted to power at high efficiency utilising GE Energy’s Jenbacher gas engine. This power can be used for the provision of electricity and heating on-site whilst eliminating the cost of diesel deliveries to remote areas. The utilisation of APG as a fuel for a generator is an excellent way of reducing carbon dioxide ...