Show results for
Refine by
Energy Equipment Supplied In Iraq
116 equipment items found
Showcase
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
Torque limiters and couplings are designed to slip during a torque overload, while still transmitting the adjusted torque. They provide dependable solutions to the problems of torque control and overload protection in power transmission equipment. These clutches include one or more friction discs mounted on an inner hub, a single nut adjustment to easily pre-sets the torque. Similar static and ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
The Hilliard M400HS brake caliper is a hydraulic applied, spring retracted brake caliper for use in heavy duty industrial applications. The brake caliper is suitable for outdoor applications and has been designed for use in many different extreme environments. The M400HS brake caliper is capable of producing a maximum 12,960 lbf (57.6 kN) of braking force at 1800 psi (124 bar) and has been ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
The A400 is an arm style caliper brake designed to accept a large selection of Hilliard thrusters. These thrusters include spring applied hydraulic released, spring applied pneumatic released, hydraulic applied spring released, and pneumatic applied spring released. The 400 requires a minimum disc diameter of 24" and is off ered in 2 sizes to accommodate a 1" and 1-1/2" thick disc. The design of ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
The Hilliard M500HS brake caliper is a hydraulic applied, spring retracted brake caliper for use in heavy duty industrial applications. The brake caliper is suitable for outdoor applications and has been designed for use in many different extreme environments. The M500HS brake caliper is capable of producing a maximum 27,000 lbf (120 kN) of braking force at 1600 psi (110 bar) and has been ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
Operates on any pressurized gas (0-220 psig). Break-away torques up to 3,700 ft lb. Output speeds up to 12,000 RPM. For industrial gas turbine or reciprocating engines. Standard and custom interfaces available. Helical rotor design. Positive displacement. Roller-ramp overrunning clutch to pre-engage the starter to the turbine. Dynamically balanced, gas tight. Delivers rated torque at 0 ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
The H3 Power Unit is Hilliard's most advanced brake control system. With a PID Loop Control, the BBH3 Power Unit is capable of monitoring speed. The Hilliard BBH2 Power Unit incorporates an engineered hydraulic circuit to control the brake torque during a typical stop. Large capacity hydraulic accumulators provide additional volume for precise control of brake pressure. Equipped with manual ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
The Hilliard M300 brake caliper is a hydraulic applied, spring retracted brake caliper for use in heavy duty industrial applications. The brake caliper is suitable for outdoor applications and has been designed for use in many different extreme environments. The M300 brake caliper is capable of producing a maximum 10,600 LBF (47 kN) of braking force at 1600 PSI (110 Bar) and has been designed for ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
HILCO Process Cartridges (330 Series) provide a reliable alternative to string-wound filter elements. Designed to boost ISO cleanliness, they come in standard or extended-tube versions, with durable disposable or washable media options and nylon or metal end caps. Suitable for industrial use across marine, mining, gas, power generation, oil & gas, pulp & paper, refinery, and steel ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
HILCO Six‑Port Standard Transfer Valves provide precise, multi-path fluid routing in industrial systems. Available in same‑side or opposite‑side six‑port layouts, they employ spring‑ and pressure‑loaded sealing pads (not plugs) for tight leak control. Built from heavy‑wall steel or stainless tubing for durability, they offer low torque, low pressure drop, and simple top/bottom ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
HILCO coalescing systems are the ideal way to remove moisture contamination in any liquid fuel. HILCO has been manufacturing coalescers for liquid fuels for over twenty-five years. Systems are available with flow capacities as high as 1500 GPM (5700 ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
Hilliard Electric Brakes provide positive stopping and reliable holding of rotating devices on demand-every time. Spring engaged when current is interrupted and electromagnetically relased when voltage is applied, these brakes are designed for maximum flexibility and long, dependable service. Each brake has an easy-to-adjust wear bolt to compensate for friction service wear and extend the life of ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
The Hilliard BBH2 Power Unit incorporates an engineered hydraulic circuit to control the brake torque during a typical stop. Large capacity hydraulic accumulators provide additional volume for precise control of brake pressure. Equipped with manual overrides and hand pump for power outages, high pressure filtration and control braking mode to meet sophisticated braking system ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
Hilliard standard disc hubs are supplied with parallel or tapered bores and keywayed to accommodate customer requirements. Hubs are manufactured from either iron or steel. Special hubs with keyless locking devices are also ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
The A300 is an arm style caliper brake designed to accept a large selection of Hilliard thrusters. These thrusters include spring applied hydraulic released, spring applied pneumatic released, hydraulic applied spring released, and pneumatic applied spring released. The A300 requires a minimum disc diameter of 12" and is offered in 4 sizes to accommodate a ½", 1", 1-3/16", and 1-1/2" thick ...
Manufactured by:Mir Group based inYenimahalle, TURKEY
2M.Solar specializes in providing solar street lights designed for both urban and rural applications. These solar street lights harness solar energy to provide efficient and environmentally friendly lighting solutions. The system typically consists of solar panels, a storage battery, an LED lamp, and smart technology for energy management. The deployment of such systems can significantly reduce ...
Manufactured by:Mir Group based inYenimahalle, TURKEY
200-240 VAC, 50 / 60Hz Total power 700W-1000W Aluminium HeatSink ...
Manufactured by:Endress+Hauser Group Services AG based inReinach, SWITZERLAND
Power supply for two 2 wire sensors or transmitters. The power supply has two galvanically isolated outputs for supplying voltage to sensors and transmitters. A built-in communication resistance enables bidirectional HART® communication with SMART sensors and ...
Manufactured by:Mir Group based inYenimahalle, TURKEY
Technical Features: 200-240 VAC, 50/60Hz. Total power 40W. Power Factor > 0,95. Aluminium HeatSink Body. IP66 (Water & Dust Proof). IK09 (Impact Rezistance). RAL 9006 Polyester Painted Luminaire Console. 120 lm/W Efficiency. Beam Angle Options 140x60D / 60D / 90D. CCT 3000K / 6500K. CRI 70 / 80 / 90. Earth Class-I (needs to be grounded). Work Temperature -40C / +50C. Osram, Samsung, ...
Manufactured by:Mir Group based inYenimahalle, TURKEY
The SKY Mini Series Solar Street Lights are designed for optimal performance in outdoor lighting applications. These lights integrate advanced solar technology to capture solar energy during the day and efficiently function at night. Each unit features high-efficiency solar panels, robust LED light fixtures, and durable batteries, ensuring reliable and sustainable illumination. Their compact ...
Manufactured by:Endress+Hauser Group Services AG based inReinach, SWITZERLAND
Paperless recording, visualization and monitoring of the process values at the same time. Safe and complete recording and visualization of all process sequences. The Memograph M RSG40 has a wide range of functionality, modular construction and a intuitive operator concept. With its brilliant 7” TFT display it is possible to display process values e.g. as curves, as a circular chart display ...