PBS - Model PB-P PB-PP -Moderated-Pressure Steam Boilers

Design
The boiler body consists of a cylindrical shell, two reinforced bottoms, an asymmetrically bedded boiler flue, a water cooled inflective rear chamber and a nest of stay tubes of the second and the third pass.
The front inflective chamber is not cooled. It is closed with a door enabling cleaning of the generating surfaces. Boiler venting is provided by a flue gas collector in the rear part of the boiler. Flue gas discharge is realized via a chimney neck with an upper or rear outlet.

Equipment
The boiler body is equipped with an instrument pipe with power supply regulation, a glass gauge, a manometer, a manostat to regulate the burner output and an emergency manostat. The boiler body also includes a neck for steam outlet, a feeding neck, a safety valve, deaeration, continual and periodical blow-down and a neck for level monitoring or the BOSB assembly.
The superheated steam boiler design is additionally equipped with a temperature sensor, an emergency thermostat and a steam superheater relief valve.
A manhole together with inspection holes enables inner revision of the boiler. All the generating surfaces are easily accessible for cleaning assuring thus permanently high efficiency even for a long-term operation with liquid fuels.

Efficiency
The heat contained in flue gasses leaving the boiler can be transferred to feeding water in the exhaust-heat exchanger. Energy gained this way increases the boiler efficiency of up to 5% reducing thus the fuel consumption.

Economizer
It supplements the basic design of the PB-P and PB-PP boilers. It can be integrated into the flue gas collector or autonomously placed at the flue gas outlet.
The economizer provides a highly efficient heat transfer - the counter-flow principle. It consists of nests of finned or plain tubes in the flue gas channel with admission in the water chambers.

Superheater
In case of use of superheated steam, the PB-P boilers can be added with a steam superheater positioned in the front inflective chamber between the second and the third boiler pass.

Modifications
The boilers can be supplied in a design with a preparation for a future change to a warm-water or hot-water operation without interfering into the pressure assembly.