PBS - Power Turbines
From Power Engineering - Turbines
Simple single-shaft single-stage turbines designed for powering pumps, turbochargers, fans, mills and grinders, or they can also be used to power an electric generator.
The turbines are optimized according to API standa...
- The turbines are optimized according to API standards
- A compact solution on one common frame with a gearbox
The turbine is connected to the powered machine directly, i.e. without a gearbox. A gearbox is used at low speeds of the powered machine and when higher efficiency is required. They are equipped with one turbine stage located between the shaft bearings and two carbon ring seals. The turbine stage is implemented with partial admission of the impeller in two basic modifications - axial impulse stage and Curtis stage. The turbines are designed for long-lasting operation as well as temporary operation with very fast start-ups from hot standby and full power load in a matter of seconds.
Turbine Parameters
Series of steam power turbines PC and Mv, Mz.
Steam inlet at the top half of the casing, outlet on the bottom half, ring lubrication of bearings without the need for oil pumps. Throttle or nozzle governing.
Steam Power Turbine PC 750 (API 611)
A modern single-stage turbine whose design meets all the requirements of API 611, e.g. steam inlet and outlet on the bottom half of the casing, dynamically rigid rotor (critical speed is significantly higher than the maximum operating and trip speeds). Bearing lubrication with overpressure oil supplied by the oil pump. The turbine is also available with a gearbox or without for direct drive.
It is on a common frame with a gearbox and a powered machine.
The turbine developed in the years of 2014-2016 is characterized by its high efficiency and therefore low specific steam consumption per 1kW of clutch power, as well as the option of operation with very high outlet steam pressure.
Technical parameters: Steam power turbine PC 750 (...
Technical parameters: Steam power turbine PC 750 (API 611)
- Inlet steam: pressure up to 12 MPa., max. temperature 535 °C
- Outlet steam: pressure up to 2.6 MPa
- Governing: throttling with one control valve and with the overload valve
- Clutch power: up to 2.2 MW
Why Us?
Effective drive of electric generators
Turbines specially developed to drive a wide range of devices. Their advantage istheir compact size accompanied by their high reliability.
Delivery on a frame with the powered device
Placing the entire set on one frame is the optimal solution for easy transport and subsequent installation and operation at the delivery point.
Customer reviews
No reviews were found for PBS - Power Turbines. Be the first to review!