Only show results in Texas? Ok

Wind Turbines equipment for Wind Energy

  • Showcase

    Viking Wind - Model VS - Household Wind Turbine

    This household wind turbine is based on the well tested and dependable predecessor – Viking 25. All the good properties from the predecessor have been continued, but Viking VS has been streamlined on performance and made more flexible.

    By Viking Wind ApS based in Randers SØ, DENMARK.

  • Premium

    Strikesorb - Model 40 - Surge Protective Device

    Strikesorb 40 surge protection devices protect mission-critical applications from lightning surges and overvoltage events. Even in the most lightning prone environments, Strikesorb 40 surge suppressor modules are capable of absorbing and dissipating the extreme energy of lightning strikes without degradation to the module. Suitable for wind ...

    By Raycap based in Maroussi Athens, GREECE. from Surge Protection - AC Protection - Strikesorb Surge Protective Devices Product line

  • Premium

    Protection & Monitoring Solutions for Wind Energy

    Raycap has ideal solutions that ensure that sensitive wind turbine electronics are protected from electrical surges associated with lightning strikes. From its highly effective surge protection technologies to its state-of-the-art monitoring and measuring devices, Raycap equipment will provide uninterrupted protection of electronic equipment ...

    By Raycap based in Maroussi Athens, GREECE. from Energy/Utilities - Renewable Energy Product line

  • Avanti - Climb Assistance System

    The Climb Assistance system developed by Avanti Wind Systems makes it easier for technicians to climb up and down the ladders inside wind turbines. It must always be installed together with a fall protection system. 

    By Avanti Wind Systems Limited based in Them, DENMARK.

  • Model WTG - 100KW High Efficient Windlens

    Adopt the most advanced and efficient technology, and wind turbine power generation capacity has been increased to more than 3 times canpared to the traditional type. The mudel is safe, low noise.

    By Aviation Power Control Co., Ltd. (APC) based in Wuxi, CHINA.

  • FeCon - Model FEC650 - Four-quadrant Converter

    The four-quadrant converter FEC1150 is designed as a building block for power conversion as full scale converter for wind turbines.

    By Wind & Sun Technologies SL based in Viladecans, SPAIN. from Wind-Converters Product line

  • Model CTW-1.5KS - Grid Tied Wind Power Inverter

    Challentec manufactures wind power inverters with different specifications, and they have shown an excellent performance in its functions and handling ability. Challentec’s wind power grid tie inverter could convertunstable fluctuating AC current from electronic generatorto AC current  with stable voltage and frequency, andthen input AC ...

    By Challentec (Wuxi) Co. Ltd based in Wuxi, Jiangsu, CHINA.

  • SoyutWind - Model 1000 - Wind Turbines

    Optimum Wind Speed 12m/s. Cut-in Wind Speed 3m/s. Cut-out Wind Speed 25m/s. Rotor Diameter 70 m. Swept Area 3.848,5 m2. Tower Height 58 - 70 m. Temperature -20 - 50 oC. Blade Type Fiberglass, composite. Tower Type Conical Steel / Composite Coating Over Steel Lattice. Control System PLC. Yaw System (Wind orientation control) Electrical. Pitch ...

    By SOYUT Enerji A.S. based in Sincan, TURKEY. from Grid Tie Systems Product line

  • Ghrepower - Model FD8-9.8 - Wind Turbine

    Excellent anti-corrosion performance, suitable for complex environment. Standard modular design, user-friendly expansion. RS485 communications interface, remote monitoring via GPRS, etc. Certified by repeated typhoon tests (maximum wind speed 45 m/s). Tens of thousands of small WTGSs have been widely used around the world. Widely used in ...

    By Shanghai Ghrepower Green Energy Co., Ltd. based in Shanghai, CHINA. from Wind Turbine - FD8 Series Product line

  • EWT - Model DW52/54-500kW - Wind Turbine

    EWT’s DIRECTWIND 500kW is designed to maximise yield from low-medium wind sites. The DW52/54-500kW is a pitch controlled variable speed wind turbine that combines continuous market driven innovation with highly advanced direct drive technology. The 500kW turbine is being offered with a 52m and 54m rotor diameter in order to ...

    By EWT Holdings N.V. / EWT B.V. based in AL Amersfoort, NETHERLANDS. from Wind Turbine Product line

  • AIR Silent - Model X - Wind Turbine

    Quiet Operation. New Silent X Carbon Fiber 'Blue' Blade. Up Tower Controls. Industry Leading 5 Year Warranty. Integrates Easily With PV.

    By Primus Wind Power based in Lakewood, COLORADO (USA).

  • Leitwind - Model LTW86 1.000 kW - Wind Turbine

    Hub Height: 80 / 90 / 97,5 / 100 m. Rated Power: 1.000 kW. Tower: steel. Cut-in wind speed: 3 m/s. Cut-out wind speed: 25 m/s. Yaw control system: Active, electrical. Wind Class: IIIA/IIIB.

    By Leitwind SPA based in Vipiteno (BZ), ITALY.

  • Leitwind - Model LTW101 2.000 / 2.500 / 3.000 kW - Wind Turbine

    Hub Height: 80-93,5 / 80-93,5 / 93,5-143 m. Rated Power: 2.000 / 2.500 / 3.000 kW. Tower: steel. Cut-in wind speed: 3 m/s. Cut-out wind speed: 25 m/s. Yaw control system: Active, electrical. Wind Class: IIIA+ / IIIA+ / IIA/IIIA+.

    By Leitwind SPA based in Vipiteno (BZ), ITALY.

  • Senvion - Model MM-Series - Wind Turbine

    The MM series is the bestseller in our onshore portfolio. With more than 3,500 turbines in operation, these models have become the standard choice in the 2 MW class. Hardly surprising, as this model can be used anywhere in the world, even in extreme climatic conditions, thanks to alternative versions for hot and cold climates. Three types of ...

    By Senvion S.A. based in Hamburg, GERMANY. from Wind Turbines Product line

  • Metronome - Model 55 - Wind Turbine

    Rated power : 52 kw. Maximum power : 55 kw. Rotor diameter : 16,40 m (199m²). Mast height : 18, 24, 30 m. Gross weight apart from mast : 2700 kg. Yaw control : Active worm gear motor control through frequency inverter. for soft start and stop integrated safety braking and emergency stop. Wind Class II according to EN61400-2 standard.

    By Eolys based in St Hilaire De Voust, FRANCE.

  • Steam Turbine Components

    We supply parts for customers throughout Europe with a focus on meeting high quality requests with highest quality request. Our parts are primarily used in HYDRO power, THERMAL power, NUCLEAR power, STEAM turbine components, INSIDE / GEOTHERMAL power plants, CRITICAL applications and WIND and TIDAL power.

    By KRÁLOVOPOLSKÁ KOVÁRNA s.r.o. based in Královo Pole, CZECH REPUBLIC.

  • Zenia - Model 7.5KW - Wind Turbine

    Data transfer via GPRS. On-line surveillance of turbine. View your data on PC or smart phone. Easy installation and service.

    By Zenia-Energy A/S based in Ikast, DENMARK.

  • DeWind - Model D6 - Wind Turbine

    Rotor diameter: 62-64 m Hub height: 60-91.5 m Double Fed Induction Generator Wind class: 2A/3A First installation 2000

    By DeWind Co based in Irving, TEXAS (USA).

  • DeWind - Model D9.1 - Wind Turbine

    DeWind D9.1 is a model intended for international markets and designed to suit the 50 or 60-Hz grids. The turbines are equipped with a three stage gearbox, a permanent magnet synchronous generator, and an IGBT pulse width converter for various grid needs to meet various grid needs.The unit features an integrated transformer inside the nacelle for ...

    By DeWind Co based in Irving, TEXAS (USA).

  • Model DSME 7.0MW - Offshore Wind Generator

    As an offshore wind generator is a complex system where its components interact, many factors should be also considered in designing a turbine such as wind and other natural conditions, new technology applications, and market requirements as well as the components and manufacturing technology. The engineers at DSME with years of experience and ...

    By DeWind Co based in Irving, TEXAS (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you