Applications in Quebec

  • Premium

    Compressed air, gas and vacuum solutions for biogas/biomethane

    Customers benefit from the extensive know-how that AERZEN has gained from decades of experience in the chemical and petrochemical industry. The use of biogas as an energy source will considerably help achieve the environmental objectives set nationally and internationally; be that reducing reliance on nuclear energy or the reduction of CO2 emissions.

    By Aerzener Maschinenfabrik GmbH Office in Vaudreuil-Dorion, QUEBEC (CANADA).

  • Premium

    Archaea in boosting methane production.

    At Probiosphere we have the right Archaea strains to boost methane production facility. Whatever the type of reactor in use. From conventional agricultural fermenters, to UASB, EGSB or CSTR. Studies conducted on Archaea additive have proven to accelerate methane production. Particularly in reactor start up phase. The trials clearly demonstrated that the microbial biomass present in the Archaea additive is capable, after rehydration, of stimulating the production of biogas in anaerobic reactor, with an efficiency identical to that of the control biomass (U1) and with an efficiency almost as good as the fresh biomass (F1).

    By Probiosphere Inc. based in Riviere-Du-Loup, QUEBEC (CANADA).

  • Premium

    Monitoring solutions for the flue gas desulphurisation

    Most large coal fired plants have a flue gas desulphurisation (FGD) plant to lower SO2 levels to below emission limit levels. The CODEL GCEM 40 series is used to monitor SO2 levels after the FGD to ensure they are below required levels and to ensure that the process is not too efficient and using too much sorbent. In addition, many plants monitor pre and post the FGD to ascertain the efficiency of the plant.

    By Codel International Ltd Distributor in QUEBEC (CANADA).

  • Premium

    Monitoring solutions for the flow combustion efficiency areas

    Combustion efficiency is of major importance on small boiler plants and the best way to monitor this is by monitoring CO2 emissions. CODEL offer the Model 1010 Cross-Duct CO monitor. Using Infra-red Gas Filter Correlation technology to filter out interferences such as dust and other gases. The Model 1010 has low maintenance requirements and meets the needs of most boiler applications. In addition to small boilers the Model 1010 is also used on Animal carcass incinerators and Crematoriums.

    By Codel International Ltd Distributor in QUEBEC (CANADA).

  • Premium

    Fast C1 to C5 - PetroAlert Series 9100

    The PetroAlert® Series 9100 combines the selectivity of gas chromatography with the sensitivity, broad dynamic range, and hydrocarbon selectivity of a flame ionization detector (FID) providing a 30 second analysis of C1-C5 hydrocarbons required in Mud Logging for Oil & Gas exploration, while maintaining C1-C2 separation at 200:1 concentration ratios.

    By AMETEK MOCON - Baseline Distributor in QUEBEC (CANADA).

  • Premium

    Archaea in boosting methane production.

    The trials clearly demonstrated that the microbial biomass present in the Archaea additive is capable, after rehydration, of stimulating the production of biogas in anaerobic reactor, with an efficiency identical to that of the control biomass (U1) and with an efficiency almost as good as the fresh biomass (F1).

    By Probiosphere Inc. based in Riviere-Du-Loup, QUEBEC (CANADA).

  • Premium

    Solutions for the energy sector

    New waste separation techniques are being implemented, and R&D programs focus on much more than waste-technology alone. The importance of biomass is recognized as a potential high-energy source for electricity and biogas. DMT’s ambitious approach is based on the principles of circular economy and cradle to cradle: waste products are in fact very valuable. We constantly investigate new ways in which to approach ‘waste’ from a different perspective.

    By DMT Environmental Technology BV Office in Blainville, QUEBEC (CANADA).

  • Premium

    Hydropower monitoring

    By Stevens Water Monitoring Systems, Inc. Distributor in Montréal, QUEBEC (CANADA).

  • Premium

    Recycling Solutions for dissolving pulp production

    Demands for environmentally friendly fiber sources have dramatically increased the interest in utilizing dissolving pulp, particularly in textile processes. ANDRITZ has a cost-effective approach to dissolving pulp production that includes a new continuous auto-hydrolysis cooking process coupled with efficient washers and other proven downstream pulp processing equipment.

    By ANDRITZ MeWa GmbH Office in Chambly, QUEBEC (CANADA).

  • Premium

    Meteorological sensors for solar monitoring

    The most important measurement parameter is irradiation. Since PV systems are becoming ever larger, the accuracy of the irradiation measurement is increasingly important for the efficiency of the system. Wind cools the temperature of the module and must therefore be included in the efficiency calculation. Precipitation leads to contamination or covering (snow). With increasing temperature, the performance of the solar module decreases. Therefore, it is important to measure the temperature of the solar module in addition to the air temperature.

    By G. Lufft Mess- und Regeltechnik GmbH Distributor in Montreal, QUEBEC (CANADA).

  • Premium

    Process instrumentation and analytics solutions for biofuels industry

    In the field of renewable energy, our comprehensive portfolio of reliable, durable, easy-to-use products for process instrumentation and analytics provides a solid foundation for mastering the complex processes in this industry.

    By Siemens Industry, Inc. - Process Analytics Distributor in Ste-Anne-de-Bellevue, QUEBEC (CANADA).

  • Material handling equipment for furniture industry

    Household and Institutional Furniture Manufacturing, Nonupholstered Wood, Household Furniture Manufacturing.

    By TerraSource Global Office in Pointe-Claire, QUEBEC (CANADA).

  • Material handling equipment for biomass energy industry

    You`ll find Jeffrey Rader`s equipment employed in many stages of woody biomass processing. Woody Biomass is the residual waste wood that results from the lumber manufacturing process. It is burned in a boiler to generate steam that is used both in the lumber-drying process and to produce electricity. Jeffrey Rader is a leader in serving the electric utility industry with boiler feed systems (pneumatic and mechanical) for producing electric power from biomass materials.

    By TerraSource Global Office in Pointe-Claire, QUEBEC (CANADA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you