Continuous Monitoring At Power Stations Articles & Analysis
26 articles found
As semiconductor devices shrink to meet the demands of advanced electronics, the precision of material removal during fabrication becomes increasingly important. Processes like ion beam etching must stop precisely at targeted etch depths to preserve layer integrity and device function. In multi-layered device architectures, even minor deviations in etch depth can compromise performance or yield. ...
The energy meter itself does not directly implement anti-islanding functionality; rather, it serves as a metering device in the power system to measure and record energy consumption. However, in distributed generation systems (such as photovoltaic systems), a series of protective measures are typically employed to prevent islanding effects, including anti-islanding protection devices that work in ...
Traditional energy meters are mainly used for energy measurement, while smart energy meters enhance this function by adding communication, data processing, prediction analysis, and self diagnosis. By real-time monitoring and analyzing the operating status of equipment, smart energy meters can self diagnosis and provide warnings to power companies, enabling them to take proactive measures to ...
Over the last year Kipp & Zonen has received a lot of questions about albedometers from customers working in the Solar Energy market. These came from engineers and researchers working with bifacial PV modules. Bifacial simply means that the back of the PV module has a glass panel, instead of an opaque metallized backing, and can collect light and generate electricity from both sides. This ...
Green hydrogen could greatly aid the global shift to sustainable energy and net-zero emissions economies. The global movement to realise hydrogen’s long-standing potential as a clean energy source is gaining unparalleled momentum. Future energy can be clean, safe, and reasonably priced with the help of hydrogen. ...
Established in 1982, Cairo Oil Refining Company (CORC) is one of the Egyptian petroleum sector companies, affiliated with the Egyptian General Petroleum Corporation. The company contributes approximately 25% of the Arab Republic of Egypt’s refining capacity. The company’s production meets the needs of the local market in petroleum products such as (butane, all kinds of gasoline, ...
ByENVEA
Globally, every industry is accelerating decarbonization initiatives. Buildings and factories are becoming more electrified by replacing fossil-fuel-based heating and processes. As more renewable energy is progressively added to the power grid, the grid itself must take steps to decarbonize. The SF6 greenhouse gas currently has a unique use exemption in insulating medium-voltage (MV) electrical ...
In an effort to assist with the ongoing pandemic, KoKo has partnered with Belun Technologies to provide a continuous monitoring device that ensures safety and security for patients and healthcare workers. Belun 100C delivers a continuous stream of patients’ vital signs to one central workstation improving response times and reducing COVID-19 exposure while increasing patient-provider ...
ByKoKo PFT
As the discussion at last fall’s COP 26 reminded us, reducing CO2 and greenhouse gases are global priorities to minimize the growing impacts of climate change. The International Energy Agency has stated that buildings and construction are responsible for nearly 15% of global CO2 emissions annually. In Canada, where our climate requires significant energy loads for seasonal heating and ...
In my previous post in my series, I covered the importance of continuous monitoring of electrical equipment to prevent fires and equipment failures – not just to minimize the damage they cause once they’ve occurred. In this post, I’ll be discussing how those monitoring capabilities are getting built “natively” into today’s circuit breakers and electrical panels ...
Capacity: 50.5 mmBTU A Canadian Cogeneration company owns and operates two combustion turbines, known as Unit 4 and Unit 5, in Halifax, Nova Scotia. The turbines both combust natural gas and emissions are monitored by a predictive emissions monitoring system (PEMS). CMC Solutions, L.L.C. was retained by the company in 2010 to provide this alternative monitoring system through the SmartCEMS-75 ...
Facility Information: MI-ROP-K3249-2016 CMC Solutions, LLC. was retained by a major Michigan university to install and evaluate a Predictive Emission Monitoring System (PEMS) under 40 CFR Part 75, Subpart E as an alternate monitoring system under Title IV of the Clean Air Act. The PEMS software (SmartCEMS with Data eLements) was installed onsite for PEMS predictive models for continuous ...
Coal combustion power plant - MIR 9000, PCME STACK 602, PicoFlow, WEX India’s Ministry of Environment, Forest and Climate Change (MoEFCC) targeted significant reduction of particulate matter (PM), sulfur oxides (SOx) and nitrogen oxides (NOx) emissions from coal fired power plants. Other key stakeholders in this air pollution mitigation project are the Central Pollution Control Board ...
ByENVEA
VIM Technologies, Inc. is a true compliance partner. As the market leader in innovative data acquisition software design, we back up each application with a compliance first mindset. Our products and services are supported by an expert staff of environmental engineers that have been serving the air regulated community since 1992. Collecting CPMS Data from Various Sources Data collection and ...
Project Overview: Gas Production Facilities Jambi Merang Development Project – a Joint Operating Body (JOB) Pertamina - Hess – Talisman project. This project was an EPCI Pre-Commissioning (engineering, procurement, construction, installation and pre-commissioning) gas processing program comprising four (4) work sites with the complete conditioning of gas and liquid. The program ...
PROJECT DETAILS Location: Kuwait Equipment Type: Vertical Forced Draft Incinerator Type of Gas: Tail Gas Capacity: 270MMBTU/hr (79MW) Burner Type: Forced Draft Staged Burner Tail Gas Capacity: 273,000 lb/hr (12,390 kg/hr) Dimensions: 20 ftOD x 110 ft (6 m x 33 m) Install Year: 2017 Aereon’s FIRECAT Forced Draft Vertical Incinerator is here used to incinerate tail gas at ...
LUMASENSE Technologies, a provider of temperature and gas sensing devices, has introduced its next generation F2T Quasar 2 Continuous Flare Stack Monitoring System for pilot flames and flared gases. Ihe scalability of the new flare monitoring systems and Iheir ability to inlegrale multiple monitoring technologies through software allow for a flare monitoring solution for all the market, ...
The relatively new European standard for measuring fl ue gas fl ow rate, EN ISO 16011 Parts 1 and 2, specifi es Quality Assurance requirements for continuous flow monitoring at, for example, large combustion and incineration plant. ...
The R1200 plant was installed in the early 00’s in Macau. The fully integrated system boasts a burn rate if 1200kg per hour and accepts a variety of different waste streams that include, clinical waste, pharmaceutical waste, liquid waste that includes solvents, waste oil, shredded tyres and well as some livestock as large as horses. The rotary kilns incineration principle is defined by one ...
Calcinated petcoke is an essential ingredient in the production of aluminium. Its quality needs to be monitored continuously throughout the production process to ensure a high quality metal grade. As part of its range of coke testing furnaces, Carbolite has designed a special model for determining the CO2 reactivity of petroleum coke in accordance with ISO 12981-1. The furnace has a single, ...