Hydraulic Power Unit Articles & Analysis: Older
13 articles found
PHT was hired to provide the control system, excitation, and new hydraulic power units for wicket gate control, while another party was hired to complete the required millwork and running gear restoration. ...
Year: 2018 Running Gear: Three units: One vertical shaft Francis turbine with synchronous generator. ...
The dam, power company, and real estate were acquired by the Town in 1965, and has since operated as a municipally owned project. ...
CHC provided a water-to-wire equipment package including two 2000 mm Axial Flow Kaplan pit units with two 500 kW/180 RPM horizontal synchronous generators. The generators were custom designed to connect directly to the turbine shaft using the pit wall as the generator shell. ...
In 2008, the dam was retrofitted for the secondary purpose of power generation. CHC supplied a water-to-wire equipment package consisting of two (2) 1250 mm axial flow pit turbines, along with two 1215 RPM induction generators, gearboxes, hydraulic power units, switchgear and controls package. PROJECT FACTS 950 kW ...
Located on the Stanislaus River in central California, the Tulloch Dam operates two vertical Francis units for a combined output of 18 MW. Commissioned in 2012, CHC provided an additional 1650 mm conventional Kaplan turbine-generator set which was added on the low level outlet of the dam, and which produces over 6.7 MW of additional power using the water that ...
CHC provided a total of four 1850 mm axial flow Kaplan turbines with synchronous generators and hydraulic power units. The Namewaminikan hydro development has a combined output of 10 MW. ...
Located on the Androscoggin River in Maine, the Livermore Falls hydro project required the installation of a turbine unit that would meet government minimum flow requirements on the river. CHC provided a water-to-wire equipment package which included a 1500 mm axial flow propeller turbine along with generator, hydraulic power ...
CHC provided two identical water-to-wire equipment packages, each including a 1250 mm axial flow Kaplan turbine, 900 kW/450 RPM synchronous generator hydraulic power unit and switchgear, controls and protection package. ...
The Douglas generating station owned and operated by Multistream Power Corporation is located on the Bonnechere River in Douglas, Ontario. The plant originally operated three 630 mm axial flow turbines as well as one Francis unit. The redevelopment project involved replacing the four existing units with six new 800 mm vertical axial flow ...
The original plant contained threeFrancis turbines producing just over 4 MW of power. In 2002, a new plant was constructed next to the existing plant, for which CHC provided four 1500 mm axial flow turbines – two propeller and two Kaplan. The existing units remained in service during construction of the new powerhouse providing uninterrupted ...
The equipment package included three 900 mm axial flow turbine-generator sets with hydraulic power units. The project was done in conjunction with the U.S. Department of Energy and is capable of generating almost 3.5 MW of power using irrigation water diverted from the Deschutes and Crooked rivers. Project Facts 3.4 MW Plant ...
Depending on requirements, material and type of shavings, the Ruf presses use 4 to 90 kW hydraulic power units to achieve an output of 30 to 1500 kg/h, producing manageable rectangular briquettes in different lengths and sizes ranging from 160 x 60 mm to 260 x 100 mm. ...