high-voltage-line Downloads
11 downloads found
High-voltage lines are major hazards for low-fl ying aircraft. Placing beacons on pylons is not sufficient to ensure safety due to the very long spans of cable (extract of Aerodrom Design Manual chapter 14.7 annex 4). The BALISOR® system (created by OBSTA in the 60's) is a beacon for high voltage ...
ByObsta
A safe and efficient, equipment, designed to bypass obstacles on high voltage power ...
The Dock Boost Transformer (DBT) provides precision voltage regulation to the vessel, delivering complete protection from the most common shore power problems, including: brownouts, spikes, sags, and low-line or high-line voltage conditions from the dock power pedestal. The DBT also provides three levels of boost to keep your ship powered even when input voltages sag by 35%. ...
10 YearWARRANTYwww.erlphase.comTransmission Line Protection Relay L-PRO 4000• Easy-to-use, intuitive setting and analysis software• IEC 61850 communication via optical/copper ports• Selectable single and 3 pole trip and reclose• High-speed fi ve-zone user-defi ned mho or quad phase and ground distance protection• Single and multi-breaker applications (i.e. ring ...
L-PRO 4000Transmission Line Protection RelayUser ManualVersion 2.3 Rev 0 D02706R02.20 L-PRO 4000 User Manual iPrefaceInformation in this document is subject to change without notice.© 2013 ERLPhase Power Technologies Ltd. ...
Our single- and multiple-duct wall-media supply units are made of extruded, anodized or powder-coated aluminum and include all common high- and low-voltage supply lines and installations as well as discharge valves for medical gases. Optionally, integrated accessory rails ensure a safe fixation of all kinds of accessories. The frontal access to the installation channel enables a fast installation ...
ByMTG GmbH
In response to the Dark Sky initiative to reduce light pollution and customer demand, DeTect developed the HARRIER Aircraft Detection Lighting Systems (ADLS) for automatic obstruction lighting activation for aviation obstructions such as wind farm turbines, high voltage transmission lines and communication towers. ...
AC testing of cables and electrical apparatus is now easier than ever. With the introduction of the High Voltage, Inc. line of portable and affordable VLF hipots, there is now a practical method of field-testing various loads, particularly cables and rotating machinery. High Voltage, Inc. offers a full line of VLF AC Hipots from 28 kVac to 200 kVac with models that can test up to 50μF of load, ...
For this reason, access to the switch control should be treated with the same safety precautions that would be applied when accessing other high-voltage lines and equipment. Follow all locally-approved safety procedures when working on or around this switch control. ...
Notes• Lay the sensor cables at least 100 mm away from any power supply cables.• Use shielded sensor cables when inductive sources are present, e.g. high-voltage lines, radio transmitters, microwave devices. 8 745.089 | 11.30EN3.3.1 Position of the connection terminalsFig. 3: Terminal clamps in the lower part of the controller (terminal cover ...
Combined with our lengthy experience in hostile environments (EMC, climate, etc. ...), the principle of cold neon discharge lights gives a proven lifetime of decades on all types of obstacles, especially the radio towers, the transmission lines, exposures in high temperature environments that do not affect performance. - LED obstruction light (NAVILITE ...
ByObsta