Showing results for: high voltage line Articles
-
Project - Unique and specifically designed PVD rig under power line
With CeTeau´s unique and specifically designed PVD rig, the high voltage power lines crossing the road alignment, do not form an obstacle to install our vertical wick drains. The PVD project contributed to an important bridge-link with a total length of 7.3km, connecting Tanjung Bin to Tanjung Pelepas in Johor, Malaysia. The bridge-link will shorten the transportation of goods and will ...
By CeTeau B.V.
-
How to lay direct buried underground cables and find fault points
How to lay temporary cables on site? Problem supplement: for the newly-built plant, the construction transformer and high-voltage line are far away from the construction center. As it is a steel structure plant, overhead lines cannot be adopted to avoid conflict with the installation of steel structure. Only low-voltage cables can be led from the transformer to the primary distribution box on the ...
-
Project - PVD Under 275kV HV Power Lines
The year of 2018 brought us challenging projects; in particular, for the first time in Malaysia & Far East, CeTeau had the opportunity to complete the installation of 14-mt depth PVD´s under the live 275 kV High Voltage power lines to complete several sections of the Maju Expressway Highway Extension. Hence, using our specially designed CeTeau’s Low Overhead Adapted Rig, we were ...
By CeTeau B.V.
-
Electricity Theft: The crime that nobody talks about
Electricity theft is often an “invisible” crime. Someone illegally taps into a power supply, hooks up a line that has been disconnected, or tampers with a meter to avoid recording electricity usage. For example, some people will reverse their meters so they run backwards, others with crack the meter seal open and place mechanical brakes to slow the meter wheel down. Indeed, many ...
-
Egypt set to pick supplier for first CSP plants; Azteq installs Europe’s first industrial solar thermal plant
Egypt advances plan for five new CSP plants The Egyptian government and Cairo-based Smart Engineering Solutions are moving ahead with a plan to build five CSP plants for a total capacity of 250 MW, Egyptian media reported earlier this month. Smart Engineering Solutions plans to select the preferred technology supplier from a shortlist of 16 companies by the end of November, Osama Kamal, the ...
-
California Must Take Back Its Power - Literally
We Californians are watching our state burn. Our houses are literally on fire, and yet we should not be surprised. Our current “new normal” is an utterly predictable consequence of global warming. While the climate crisis fueling our wildfires is the direct result of the fossil fuel industry’s profit-driven corporate greed, another culprit, one that has for years valued moneyed ...
-
Producing Green Energy: Must Have
In today’s world, everything we do almost revolve around power and power generating equipment are very necessary for that matter. Industrial, commercial and residential needs drive the need for the generation of power and power equipment. There is a very rapid growth of this need which begins in huge plants and then is disbursed using power lines to substations and finally to the ...
-
What is HV and LV Power Distribution System?
An HV power distribution system simply means a high voltage distribution system while an LV is a low voltage or tension power distribution system. LV power supply can be around 230 Volts for a single-phase connection and 400 Volts for a three-phase connection. On the other hand, the HV distribution system can even reach 11Kilo-Volts, meaning it is highly used by bulk power purchasers like ...
-
MTHPA
OVERVIEW Methyl tetrahydrophthalic anhydride (MTHPA, MeTHPA) is a new type of liquid organic acid anhydride epoxy resin curing agent with excellent performance. Because the anhydride curing agent has better heat resistance and chemical stability than the amine curing agent, and can maintain excellent physical and electrical properties at higher temperatures, in recent years, it has been insulated ...
-
New energy economy emerging in the United States
As fossil fuel prices rise, as oil insecurity deepens, and as concerns about climate change cast a shadow over the future of coal, a new energy economy is emerging in the United States. The old energy economy, fueled by oil, coal, and natural gas, is being replaced by one powered by wind, solar, and geothermal energy. The transition is moving at a pace and on a scale that we could not have ...
-
Power Outages, Extreme Weather, & Microgrids Explained
Recent wildfires in California and bomb cyclones in New England have led to massive power outages. Here are 10 answers to frequently asked questions about why outages occur, how power lines start wildfires, and alternatives to our aging and unreliable power grid. How do power grids work? Utilities generate electricity at power plants, and then distribute it to our homes and businesses over ...
By Bloom Energy
-
World Wind Power Poised to Bounce Back after Slowing in 2013
At the end of 2013, the wind farms installed in more than 85 countries had a combined generating capacity of 318,000 megawatts, which would be enough to meet the residential electricity needs of the European Union’s 506 million people. New data from the Global Wind Energy Council show that wind developers built 35,000 megawatts of new generating capacity worldwide in 2013. This was down ...
-
If Cobalt is so bad, why are some companies still using it? Part 2
On our website recently, we started to ask and answer a fundamental question that is critical for the global energy storage industry to address – If cobalt is so bad, why are some companies still using it in lithium-ion ...
-
Line Post Insulator
We can offer different Voltage of Line Post Insulator for Transmission Line. Such as Long Rod Insulator, Rod Insulator and Pin Type Insulator. Contact us get more details about Line Post Insulator, such as TDS, Application Method, OEM etc. We can supply different type of Line Post Insulator, also customer required. Line post insulator is an industrial product used to insulate and suspend ...
-
Fault characteristics in electrical equipment
Proper design and installation of electrical equipment minimizes the chance of electrical faults. Faults occur when the insulation system is compromised and current is allowed to flow through an unintentional path. IEEE Std 493 Recommended Practice for the Design of Reliable Industrial and Commercial Power Systems1 publishes data that reports that the vast majority of faults are classified as ...
-
Relevant Introduction of Ground Wire
Copper clad steel ground rod wire function: High-voltage ground wire is used for line and transformer construction. It prevents electrostatic induction shock or misclosure of nearby charged body to ensure safety. Due to poor insulation performance or humid environment, there will be a certain static electricity in their cases of household electrical appliances. In order to avoid accidents, a wire ...
-
Creating Renewable Energy Integration Solutions
Integrating Renewable Energy Sources Into the Grid How can we respond to demands for both clean energy and greater energy security? By integrating renewable energy sources like wind and solar into the grid. As the power sector faces growing pressure to decarbonize and diversify its resources, we're witnessing a major transition away from traditional fossil fuels. To advance clean air standards ...
By Lumin
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you