Only show results in Connecticut? Ok

Gas Engines equipment for Fossil Energy

  • Premium

    CECO Burgess-Aarding - Gas Turbine Silencer

    The Burgess-Aarding brand Gas Turbine Silencer is custom-engineered to provide a solution to meet your unique project and environmental standards, while reducing noise levels, and maintaining operational efficiency. Our gas turbine silencer can include our patented SSF technology for severe service, which effectively eliminates the packing ...

    By CECO Environmental based in Dallas, TEXAS (USA). from CECO Burgess-Aarding Product line

  • Premium

    Expansion Joints for Gas-Fired Power

    Expansion joints are used to provide a point of flexibility in flue ducts, and to relieve stress caused by system movement. Our Peerless-Aarding brand Expansion Joints for Gas-Fired Power are designed with the latest advancements in engineering and materials technology, delivering high quality solutions to fit your specific application needs. Our ...

    By CECO Environmental based in Dallas, TEXAS (USA). from CECO Aarding - Expansion Joints Product line

  • Premium

    Hilliard - Hydraulic Clutch Assembly

    Variable and fixed displacement types. SAE mounting, spline shafts. Typical operating pressures up to 5000 psig (350 bar). High-speed operation. High starting torque efficiency. Different sizes for different applications. Suitable for open and closed loop circuits. Supply includes overrunning clutch.

    By Hilliard Corporation based in Elmira, NEW YORK (USA). from Engine Starter Product line

  • Premium

    CECO Aarding - Gas Turbine Exhaust Ducts

    Gas Turbine Exhaust ducts are predominantly applied as a transition between diffuser and diverter systems, or between the diverter system and HRSG (inlet ducts). Our Peerless-Aarding brand Gas Turbine Exhaust Duct is engineered using the latest cold casing design, adapted to your operational conditions. With premium materials and decades of ...

    By CECO Environmental based in Dallas, TEXAS (USA). from CECO Aarding - Gas Turbine Exhaust Systems Product line

  • Premium

    Hilliard - Electric Start Assembly

    24 volt DC power. Solenoid actuated Positork drive. Output torque up to 80 ft lb. Splined output for gas turbine applications. SAE 3 mounting flange, multi-position. CW and CCW direction of rotation.

    By Hilliard Corporation based in Elmira, NEW YORK (USA). from Engine Starter Product line

  • Premium

    CECO Peerless-Aarding - Gas Turbine Internal Insulation

    Our custom Peerless-Aarding brand Gas Turbine Internal Insulation designs are engineered to deliver maximum performance, durability and reliability based on the latest operational requirements and newest materials. In our cold casing design, the insulation system is fitted to the casing interior using a custom-designed support system. The ...

    By CECO Environmental based in Dallas, TEXAS (USA). from CECO Aarding - Gas Turbine Exhaust Systems Product line

  • Premium

    Hilliard - Pneumatic Start Assembly

    Operates on any pressurized gas (0-220 psig). Break-away torques up to 3,700 ft lb. Output speeds up to 12,000 RPM. For industrial gas turbine or reciprocating engines. Standard and custom interfaces available. Helical rotor design. Positive displacement. Roller-ramp overrunning clutch to pre-engage the starter to the turbine. Dynamically ...

    By Hilliard Corporation based in Elmira, NEW YORK (USA). from Engine Starter Product line

  • Premium

    Hilliard - High-Speed Starter Overrrunning Clutch Drive

    The Hilliard High-Speed Starter Overrunning Clutch Drive provides positive engagement and high torque on demand. Featuring a unique roller-ramp design, the clutch when engaged transmits power via the precision-machined cam and roller assembly connected to the input shaft. A ball bearing at each end of the roll cage supports and aligns the cam in ...

    By Hilliard Corporation based in Elmira, NEW YORK (USA). from Engine Starter Product line

  • Premium

    Siemens - Model BGA - Biogas Analyzer

    Gas analysis in biogas plants with the 'Set BGA' complete measuring system from Siemens. Set BGA (Bio Gas Analyzer) is a fully configured and ready-to-run gas analysis system for use in biogas plants. The integrated ULTRAMAT 23 industrial gas analyzer has four measuring channels for simultaneous determination of the relevant gas components ...

    By Siemens Industry, Inc. - Process Analytics based in Houston, TEXAS (USA). from Continuous Gas Analytics Product line

  • Premium

    CECO Aarding - Gas Plant Stack Isolation Dampers

    Stack Isolation Dampers are designed to provide accurate air flow and isolation at high temperature levels, and reduce the stack effect of a system when offline, protecting ductwork from the elements. Our Peerless-Aarding brand Gas Plant Stack Isolation Dampers are engineered for optimal performance and efficiency, and are ...

    By CECO Environmental based in Dallas, TEXAS (USA). from CECO Aarding - Dampers Product line

  • Premium

    Diablo Neron - Hydraulic Power Pack

    The hydraulic power pack can be used in rescue vehicles, demolition equipment, mining machinery and hydraulic supports, test rigs, etc. Full utilization of all hydraulic equipment on site in case of mobile independent kit Neròn can supply a powerful power pack with gas engine. The gas engine will supply to the hydraulic pump the oil to run ...

    By Neron Pumps based in Ranica, ITALY. from Hydraulic Power Pack Product line

  • Premium

    CECO Aarding - Gas Turbine Diffusers and Plenums

    The gas turbine diffuser duct or Plenum duct section is one of the major transition areas between the gas turbine exhaust and the exhaust system. The Diffuser directs exhaust gas flow through a straight flow, while the Plenum duct changes the flow of gas into a 90 degree bend. Our Peerless-Aarding brand Gas Turbine Diffusers and Plenum is ...

    By CECO Environmental based in Dallas, TEXAS (USA). from CECO Aarding - Gas Turbine Exhaust Systems Product line

  • Premium

    ennox - Model GCD - Gas Chill Dryer

    Biogas, sewage gas and landfill gas contains not only water vapour but also a whole host of additional impurities such as hydrogen sulphide, NH3 and siloxane, which, when processed in the utilization system can not only lead to a reduction in efficiency, but also result in damage of the system.

    By ennox biogas technology GmbH based in Hard, AUSTRIA. from Purify Product line

  • Premium

    ERG V-tex - Syngas and Biogas Cleaning

    Whether the requirement is for cleaning tars from biogases generated from a hot gasification process, or sulphurous compounds or VOCs from biofuels generated from an anerobic digestion process, V-tex can be the solution.

    By ERG (Air Pollution Control) Ltd based in Horsham, UNITED KINGDOM. from Scrubbing Technology Product line

  • Premium

    THIOPAQ - Deep H2S Removal From Biogas

    “Meet stringent gas quality requirements with deep hydrogen sulphide removal from biogas”. The THIOPAQ® was developed by Paques, in cooperation with universities, research institutes and customers. It can be applied to a wide range of biogas streams containing H2S and can be combined with all biological anaerobic systems. The ...

    By Paques Technology B.V. based in EL Balk, NETHERLANDS.

  • Premium

    Shand & Jurs Biogas - Model 97400 - Well-Type Manometer

    The S&J 97400 Well-Type Manometer is a direct reading single tube type gauge, that provides highly accurate, easy to read pressure measurements. Standard Red Oil Fluid with specific gravity of 1.0 is used in the manometer. The S&J 97400 Well-Type Manometer is used to gauge pressures at critical points in gas-train systems. Pressure, vacuum ...

  • Premium

    STS - Siloxane Monitor for Biogas Feeds to CHP Engines

    Gas derived from Anerobic Digestion (AD) plants or landfill sites is usually fed to combined heat and power (CHP) engines to be converted to electricity for supply to the grid or for powering on site plant and equipment. When engines fail they can be expensive to fix and lead to significant loss of income for the operator. Biogas and Landfill ...

    By Safe Training Systems Ltd. (STS) based in Wokingham, UNITED KINGDOM. from Siloxane Monitoring Product line

  • Premium

    Shand & Jurs Biogas - Model 97401 - U-Tube-Type Manometer

    The Shand & Jurs Biogas 97401 U-Tube Type Manometer is a direct reading single tube type gauge, that provides highly accurate, easy to read pressure measurements. Standard red oil fluid is used in the manometer.

  • Premium

    SpectrOil - Model M/F-W - Fuel Analyzer

    The SpectrOil M/F-W has become the standard instrument when on-site and immediate fuel analysis is a necessity. It fulfills the requirements of ASTM D 6728, Standard Test Method for Determination of Contaminants in Gas Turbine and Diesel Engine Fuel by Rotating Disc Electrode Atomic Emission Spectrometry.

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA). from Other Fluid Analyzers Product line

  • Boilers

    50,000#/HR: Babcock & Wilcox package 250 lbs. Design/220 lbs. operating pressure gas and oil fired. 125,000#/HR: Foster Wheeler fluidized bed 775 lbs. design pressure / 650 lbs. operating  pressure natural coal fired.

    By International Power Machinery Company based in Cleveland, OHIO (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you