- Home
- Companies
- Aereon, part of Cimarron group
- Products
- AEREON - Model Inferno Series - ...
AEREON - Model Inferno Series -Gas-Assist Flares
AEREON`s Inferno Series Gas-assisted flares are flares that use an additional source of high pressure gas at the flare tip to mix with the waste gas and create additional turbulence to ensure adequate mixing with air, which in turn provides for smokeless combustion. The waste gas is further distributed at the flare tip through AEREON`s proprietary Starfire burner, optimizing gas and air mixing. Gas-assist flares are typically utilized when you have a readily available source of natural gas, and a preference/requirement not to use a blower-based air-assisted flare system.
The Inferno Series gas-assist flares meet all Quad O and 40 CFR 60.18 requirements. Available in sizes as small as 4 in. x 25 ft. through to 8 in. x 40 ft. in standard sizes, typically capacity ranges from 1.5 to 10.65 MMSCFD although higher flows are possible for higher pressure and/or lighter gases. An AEREON representative can help you size your flares to your specific conditions. The Inferno Series gas-assist flares are also available in tandem dual HP/LP, or in tri-riser HP/MP/LP configurations.
AEREON works across the complete oil and gas supply chain to provide comprehensive solutions for all of your gas and vapor handling, combustion and recovery needs.
We specialize in innovative, high quality and cost-effective custom engineered or standard options for:
- Flares
- Enclosed Combustors
- Vapor Recovery Units
- Thermal Oxidizers
At AEREON, we provide our customers environmentally-compliant solutions that meet stringent air quality regulations.
Through our Flare Industries and Jordan Technologies brands and with over 30 years of experience, we are able to offer our clients a broad portfolio of solutions and services from initial design through aftermarket servicing.
AEREON can be your single source supplier for all of your gas and vapor combustion, handling and recovery equipment needs.
Partnering with you, AEREON’s own in-house engineering staff and service division can provide either a pre-engineered standard fl are solution for almost any application or a completely customized flare system.
AEREON’s Vapor Recovery Units (VRUs), Flares, Enclosed Combustors and Thermal Oxidizers are all part of the complete solution for your emission control application and can be combined with one another or installed individually to handle your specific needs.
Unparalleled Performance
Emissions
- Smokeless, efficient combustion with no visible emissions, preventing fines.
- EPA OOOO compliant reducing emissions in order to keep sites operating.
- 40 CFR 60.18 compliant open elevated fl ares (>98% VOC destruction efficiency).
Reliability and Effi ciency
- Continuous pilot allowing you to meet “Quad O” regulations
- Continuously sparking with low power consumption (1.6 amps).
- Optional solar powered ignition panel with 2-week battery back up for reliable ignition when power is not available or for remote locations with no power onsite.
Infinite Turndown
- Operates from purge to 100% capacity; operates smokeless throughout entire range of flows.
Superior Design
Smokeless Combustion
- Utility f are option for gases with low BTU content provides smokeless combustion with no assist media; reducing operating and maintenance costs.
- Air assist flare option for gases with high BTU content provides smokeless combustion with a blower; eliminates the need for assist gas and reduces operating costs.
- Gas assist flare option for gases with high BTU content provides smokeless combustion with high pressure assist gas; guarantees compliance where there is no power available for a blower.
Reliability, Easy Operation
- Retractable pilots for ease of installation and quicker turnaround time on inspections.
- Guywires supplied with soil anchors that do not require concrete foundations.
Low, Simple Maintenance
- Quick, easy installation for rapid onsite deployment, reducing the number of required onsite personnel.
- Standardized design allows delivery of systems in less than 2 weeks.