- Home
- netherlands
- Equipment
Show results for
Refine by
Energy Equipment & Supplies In In Netherlands
38,145 equipment items found
Showcase
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
Torque limiters and couplings are designed to slip during a torque overload, while still transmitting the adjusted torque. They provide dependable solutions to the problems of torque control and overload protection in power transmission equipment. These clutches include one or more friction discs mounted on an inner hub, a single nut adjustment to easily pre-sets the torque. Similar static and ...
Showcase
Manufactured by:FARM2000 - M & K Products (Bromsgrove) Ltd. based inDodford, UNITED KINGDOM
FARM2000 High Temperature (HT) boilers are used for heating, hot water and hot air systems by efficient and controlled combustion of biomass. Biomass contain gases which represent half of the calorific value, and which can only be burned and release their energy at high ...
Showcase
Manufactured by:Hermann Sewerin GmbH based inGütersloh, GERMANY
Multiple gas measuring device with infrared sensors - optimised for biogas and landfill gas. The Multitec 540 is a gas measuring device for analysing gas mixtures that are formed in biological processes. It can measure the concentration of up to five gases simultaneously. The device is fitted with infrared sensors for measuring methane and carbon dioxide. It can also be fitted with ...
Showcase
Manufactured by:Ecological Laboratories, Inc. based inCape Coral, FLORIDA (USA)
Several trials have been conducted to showcase the diversity of the technologies capability to adjust to different feedstocks. An anerobic digestor operator in N. Ireland, displaying high levels, of hydrogen sulfide at 270 ppm and low methane output. The trial was conducted with daily treatment of BGE1 and BGE2 on an 600,000-gallon anaerobic digestor with a combined feedstock of grass, chicken ...
Showcase
Manufactured by:Biogasclean A/S based in, DENMARK
MBR – Moving Bed Reactor – is Biogasclean’s patented technology for cleaning biogas with a high sulfur content. The MBR technology is especially developed for biogas formed during treatment of wastewater on molasses ethanol distilleries. Gas bubbles through liquid with moving media. After compression, cooling and air injection the raw biogas with H2S is led through the gas ...
Showcase
Manufactured by:Zeltex LLC based inHagerstown, MARYLAND (USA)
Decades of expertise in portable octane, cetane and bio-fuel with lab-accurate analysis. 45 State Agencies have used Zeltex portable fuel octane analyzers over the years, making the ZX-101 series the gold standard in portable fuel testing. The main way that fuel is analyzed is through a CFR engine, which takes time, costs a lot of money, and destroys the sample. Our portable fuel octane analyzers ...
Showcase
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
HILCO Fuel Gas Strainers are custom-engineered duplex or simplex basket strainers built from wrought materials—not castings—for superior flexibility and serviceability. Designed to ASME Code standards, they accommodate mesh-lined or perforated baskets and offer options like internal bypass, differential pressure gauges, and varied material constructions to fit oil & gas, power generation, ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
HILCO Six‑Port Standard Transfer Valves provide precise, multi-path fluid routing in industrial systems. Available in same‑side or opposite‑side six‑port layouts, they employ spring‑ and pressure‑loaded sealing pads (not plugs) for tight leak control. Built from heavy‑wall steel or stainless tubing for durability, they offer low torque, low pressure drop, and simple top/bottom ...
Premium
Manufactured by:Federal Signal Corporation based inUniversity Park, ILLINOIS (USA)
Model 121ALED is a compact rotating warning light available in 24VDC, five colors and features a parabolic reflector that rotates around a 360-degree LED, providing 60 revolutions per minute in all directions. The zinc die-cast alloy base comes ready to surface or ½-inch NPT pipe mount. Optional brackets are available to simplify installation on walls or in corners. The twist and lock lens ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
The A300 is an arm style caliper brake designed to accept a large selection of Hilliard thrusters. These thrusters include spring applied hydraulic released, spring applied pneumatic released, hydraulic applied spring released, and pneumatic applied spring released. The A300 requires a minimum disc diameter of 12" and is offered in 4 sizes to accommodate a ½", 1", 1-3/16", and 1-1/2" thick ...
Premium
Manufactured by:Federal Signal Corporation based inUniversity Park, ILLINOIS (USA)
Model 121SLED is a compact rotating warning light available in 120VAC, five colors and features a parabolic reflector that rotates round a 360-degree LED, providing 60 revolutions per minute in all directions. The zinc die-cast alloy base comes ready to surface or ½-inch NPT pipe mount. Optional brackets are available to simplify installation on walls or in corners. The twist and lock lens ...
Premium
Manufactured by:Federal Signal Corporation based inUniversity Park, ILLINOIS (USA)
CN SignalMaster LED directional warning lights provide advanced warning and directional lights for police cars, fire trucks, and other emergency vehicles. The CN SignalMaster can quickly be changed from a warning light to a directional LED light with Federal Signal’s Spectralux® technology. SpectraLux multicolor LED technology allows for a single LED source to change while in motion. ...
Premium
Manufactured by:Apex Engineering Products Corporation based inAurora, ILLINOIS (USA)
RYDLYME Biodegradable Descaler is used to safely and efficiently dissolve tough mineral deposits such as water scale, limescale, calcium, and rust from the water side of industrial equipment! Recommended by the U.S. Navy and countless OEMs, RYDLYME descaling chemical is NSF-registered for use in various industries and applications including beverage, pharmaceutical, bottling, and food processing ...
Premium
Manufactured by:Dragflow S.r.l. based inRoverbella (MN), ITALY
Thehydraulic power packsare based on diesel engines, compliant with the latest emission requirements, or electric motors built with cutting-edge ...
Premium
Manufactured by:Gouda Geo-Equipment B.V. based inHillegom, NETHERLANDS
An electric CPT measuring head is a calibrated high-precision measuring instrument designed for continuous and/or discontinuous mechanical cone penetration testing. It allows for pushing in CPT sounding tubes with a diameter of 36 mm along with inner rods, and a mechanical CPT cone. The force on the mechanical CPT cone is transferred to the surface by means of the inner rods running through the ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
Standard disc diameters range from 6 inches to 54 inches, with other sizes supplied to order. Discs are bored and drilled to fit Hilliard standard Hubs, meeting customer ...
Premium
Manufactured by:Sunkaier based inDingshu, Yixing, CHINA
Steam Tube Dryer (STD) is an indirect heat dryer using steam tubes heated by steam as heat source disposed inside the rotating ...
Premium
Manufactured by:Federal Signal Corporation based inUniversity Park, ILLINOIS (USA)
Unique low-profile, linear light bar. Available in 44" and 51" lengths. Amber, Blue, Green, Red, and White. Single-, dual-, and tri-color capability. Built-in SignalMaster™ directional warning. Front flood, rear flood, left flood, right flood, takedowns, alley lights, OBDII-integrated S/T/T, and work lights available. Low-power mode. (28) flash patterns. 12 Vdc. Easy service while installed ...
Premium
Manufactured by:Smart Testsolutions GmbH based inZentrale Stuttgart, GERMANY
The CVM systems with MASTER feature comprehensive functionalities and high-speed data transmission and processing. A complete system consists of the number of CVM G5 measuring modules required for the respective application, a bus module, a termination module and a process module. Adding the process modules Master or SlimMASTER to the measurement module stack enables more comprehensive as well as ...
Premium
Manufactured by:Aerzener Maschinenfabrik GmbH based inAerzen, GERMANY
The GMD series, made by AERZEN, is the universal gastight booster solution for the low pressure range. Equipped with a magnetic coupling, it ensures a maintenance-free sealing concept. Locking systems for sealing the drive shaft are completely eliminated and allow a low-maintenance machine concept. The separation between oil and process side is achieved by a special piston ring ...