- Home
- Equipment
Refine by
Lamtec Energy Equipment & Supplies
11 equipment items found
Manufactured by:LAMTEC America Inc. based inHastings, MINNESOTA (USA)
Flame scanners that comply out of the box with NFPA 85 proof-of-flame requirements, that easily retrofit to existing mount tubes, that wire into existing BMS or other safety control systems with only 4 connections needed, means shortened conversion time, lower install cost. And with ruggedized in-unit electronics, the entire installation and commissioning is done simply at the point of physical ...
Manufactured by:LAMTEC America Inc. based inHastings, MINNESOTA (USA)
The CMS offers absolute flexibility in the design and control of your combustion control system. CMS incorporates up to 18 analogue inputs (or 9 failsafe), 41 digital outputs, 60 digital inputs, and 10 channels for actuator/drive control depending upon module hardware configuration. Internally, CMS can provide up to 16 individual fuel curves, each controlling up to 10 channels/actuators with 20 ...
Manufactured by:LAMTEC America Inc. based inHastings, MINNESOTA (USA)
LAMTEC America’s all-in-one design in gas igniter solutions are the industry-leading solution to cost-effective replacement of legacy equipment in terms of installed cost and operational improvements. Igniters that consistently light off main burners, provide reliable transition support, and have proven, tested to compliance, service life, are absolutely must-haves for fossil power (boilers ...
Manufactured by:LAMTEC America Inc. based inHastings, MINNESOTA (USA)
The BC300 is a simple burner sequencer for industrial burners in thermal process plants. Designed for burners of all sizes, it can be used on continuous or intermittent operation applications. Control output can be single stage or two stage, with pneumatic or in cycle modulation. Flame monitoring can be ionization with single or twin electrode operation, UV tube, or F152 with FFS07 or FFS08 ...
Manufactured by:Lamtec GmbH & Co.KG based inWalldorf, GERMANY
The F200K is mainly used as a single and multi-fuel burner in large power plants, heating plants, chemical plants, waste incineration plants and combustion plants with a restricted view of the flame. It can be used for monitoring firing systems, that are operated ...
Manufactured by:LAMTEC America Inc. based inHastings, MINNESOTA (USA)
The BT300 BurnerTronic Series combustion controllers are specially designed for small commercial monobloc burner applications. Optional expansion modules enable systems to be individually configured to meet specific application ...
Manufactured by:Lamtec GmbH & Co.KG based inWalldorf, GERMANY
Modular combustion management. Suitable for simple to high-end applications. Inputs/outputs freely configurable. Largely language-neutral due to use of symbols. Worldwide approval CE/UL/SIL 3. CODESYS Soft-PLC integrated. Integrated fault indicatior system. Modbus TCP on-board. O2 control. Adaptive CO/H2 combustion optimisation (SIL2). Integrated flame monitoring. Integrated valve leakage test ...
Manufactured by:Lamtec GmbH & Co.KG based inWalldorf, GERMANY
BurnerTronic BT300 combines the advantages of an electronic fuel/air compound control with an electronic burner control unit. Up to 3 motorised actuators are available. In addition, the BurnerTronic BT300 can be expanded by various modules, for example, by a module for speed control of the combustion air ...
Manufactured by:Lamtec GmbH & Co.KG based inWalldorf, GERMANY
3 in 1: Three flame scanners in one - Versatile, promising and highly intelligent. The F300K flame scanners offer digital flame analysis in both the UV and IR spectral ranges, making them suitable for virtually all combustion applications. Each model features a solid-state sensor with dual processors that provide continuous ...
Manufactured by:Lamtec GmbH & Co.KG based inWalldorf, GERMANY
For decades, O2 control has been advancing energy efficiency in industrial combustion. It is based on the measurement of left over oxygen in the exhaust fumes. Disturbances such as false air can have an impact on the measurement and impair the functionality, efficiency, and safety of the ...
Manufactured by:Lamtec GmbH & Co.KG based inWalldorf, GERMANY
The pilot burner is used in industrial furnaces, thermoprocessing plants, and boilers for gas, oil, and solid ...