Refine by
Ge Energy Equipment & Supplies In In Eritrea
35 equipment items found
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
Associated petroleum gas (APG) is also known as flare gas. APG can be converted to power at high efficiency utilising GE Energy’s Jenbacher gas engine. This power can be used for the provision of electricity and heating on-site whilst eliminating the cost of diesel deliveries to remote areas. The utilisation of APG as a fuel for a generator is an excellent way of reducing carbon dioxide ...
Manufactured by:GE Power based inWest Chester, OHIO (USA)
Our steam turbine portfolio has the breadth and depth to meet any project-specific need, integrating seamlessly with our gas turbines, HRSGs, and balance of plant equipment to ensure operational success, satisfaction, and profitability for our customers across various ...
by:General Electric based inFairfield, CONNECTICUT (USA)
Introducing the J920 FleXtra Jenbacher with 49% el. efficiency 60Hz. GE proudly announces the J920 FleXtra Jenbacher 9.5 MW system for 60 Hz with best-in-class 49% el. efficiency for large gas engine power plants at APPA, Denver on June 16th. Whether you're seeking full power at high efficiency levels or a unit capable of short start-up times. GE's J920 FleXtra gas engine is an ideal, reliable ...
Manufactured by:GE Power based inWest Chester, OHIO (USA)
GE’s 9HA high efficiency, air-cooled gas turbine is one of the industry leaders among H-class offerings, and now the 9HA gas turbine is at the heart of the world's most efficient combined-cycle power ...
Manufactured by:GE Power based inWest Chester, OHIO (USA)
A single, economical solution for the dispatch needs of nearly every industry ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
A GE's Jenbacher genset is configured to produce electrical power only, which the Jenbacher unit does at high efficiency. When a unit is in a genset configuration the engine, alternator and other supporting items are located on a skid. Waste heat from the engine would be dissipated in the exhaust gas and via an engine cooling circuit linked to heat dump ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
The GE Jenbacher container is a high quality unit which can be deployed where economical and speedy installation is required. The GE Jenbacher containers are fully tested when they leave the production facility and are excellent for plug-and-play applications. The overall compact design ensures a space saving installation with service-orientated ...
by:General Electric based inFairfield, CONNECTICUT (USA)
Designed for IEC Wind Class IIIs, GE’s 2.75-120 wind turbine features a 120-meter rotor in combination with the proven single-blade pitch control. The 2.75-120 offers the latest enhancements in load management controls, low acoustic emissions, efficient electrical power conversion and robust ...
by:General Electric based inFairfield, CONNECTICUT (USA)
GE’s 1.7-100/103 wind turbine offers a 47% increase in swept area when compared to GE’s 1.6-82.5 turbine, resulting in a 24% increase in Annual Energy Production (AEP) at 7.5 m/s. This increase in blade swept area allows greater energy capture and improved project economics for wind developers. The 1.7-100/103 uses GE’s proprietary 48.7-meter blade which has the same proven ...
by:General Electric based inFairfield, CONNECTICUT (USA)
GE’s 1.85-87 wind turbine is designed for Class IIs winds, and offers an 11% increase in swept area and an extra 230 kW output at rated wind speed compared to the 1.6-82.5 turbine. The increase in blade swept area results in a 10% increase in Annual Energy Production (AEP) at 8.5 ...
by:General Electric based inFairfield, CONNECTICUT (USA)
GE’s 2.2-2.4MW, 107m rotor wind turbine is an advanced evolution of the 1.x series, providing a 35% increase in Annual Energy Production (AEP) over its predecessor, the 1.85-87 (at a 2.4 rating). Designed for medium wind speeds, the 2.2-2.4MW turbine provides a 51% increase in swept area with the 107m rotor, and an extra 350-450 kW output at rated wind speed compared to the 1.85-87 turbine, ...
Manufactured by:GE Power based inWest Chester, OHIO (USA)
Our air-cooled generator systems install fast, integrate easily, and deliver the power needed with more uptime. These generators are the choice for power plant applications that demand simple, flexible operation. Prepackaged generator solutions arrive ready-to-install at site reducing project cycle time with increased ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
The Jenbacher Type-2 gas engine was introduced in 1974 and is the engine with the longest development history of the range. The 208 has 8 inline cylinders and is available at electrical output from 249kWe or 335kWe. The J208 is renowned for its robust design and highest levels of component durability. It is particularly well suited to troublesome gases such as landfill ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
Long service intervals, maintenance-friendly engine design and low fuel consumption ensure maximum efficiency in GE Energy’s type 3 engines. Optimised engine components prolonging service, life even when using non-pipeline gases such as landfill gas. The Type-3 stands out in its 500 to 1,100 kWe power range due to its technical maturity and high degree of ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
Continuously refined on GE Jenbacher’s extensive experience, the GE Jenbacher type 6 engines are reliable, advanced products serving the 1.8 to 4.4 MW power range. It’s 1,500 rpm engine speed results in a high power density and low installation costs. The type 6 pre-combustion chamber achieves maximum efficiency with low emissions. Proven design and optimised components enable a ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
As the only gas engine specialist offering small and large engines, GE is introducing the innovative J920 9.5MWesystem. Whether you are seeking full power at high efficiency levels or a unit capable of short start-up times, GE’s J920 Jenbacher gas engine is your ideal solution for reliable lasting power and grid stabilisation with a low carbon ...
by:GE Power Conversion, part of GE Vernova based inSchenectady, NEW YORK (USA)
Customers can benefit from a hybrid of new energy sources, like fuel cells and battery energy storage solutions to enable different energy use modes, including engine-off operation for entry into port, and power network boost to manage and smooth peak loads without oversizing the power system. Hull-side and containerized energy stores, directly integrated to LV systems or via transformer on high ...
Distributed by:Apex Power Concepts based inDubai, UNITED ARAB EMIRATES
As the world's leading manufacturer of photovoltaic modules, Sharp produces both single and multicrystalline solar cells. Sharp solar panels are built with the most efficient cells on the market and use a textured cell surface to reduce reflection of sunlight and BSF (Black Surface Field) structure to improve conversion efficiency. An anti-reflective coating provides a uniform blue color and ...
Manufactured by:GE Power based inWest Chester, OHIO (USA)
GE’s 6F gas turbines offer the superior performance, reliability, and flexibility typically associated with larger power plants. The 6F models, including the 6F.01 and the 6F.03 gas turbines, pack a lot of power into a small package, offering durability and flexibility for harsh, remote, or floating power environments. Whether it be for 50 or 60 Hz, the 6F gas turbines maintain ...
Manufactured by:GE Power based inWest Chester, OHIO (USA)
Its ability to operate in island mode, coupled with multiple decades of proven rugged performance, make the 6B.03 an excellent solution for remote installations and extreme operating conditions. The rugged, reliable 6B.03 heavy-duty gas turbine is a popular choice for refineries, natural gas liquefaction power, CHP applications, and industrial ...