Refine by
Sps Energy Equipment & Supplies In In Nepal
18 equipment items found
Manufactured by:Spitzenberger & Spies GmbH & Co. KG based inViechtach, GERMANY
Very fast slew rate >52V/µs at 230Vrms as required by IEC/EN 61000-4-11. Operates from DC up to 5kHz large signal bandwith (-3dB) optional up to 30kHz. Small signal bandwith up to 100kHz. High long-term (1 hour) overload characteristic. High short-term (5-10 min) overload characteristic. Very high peak load ability (up to 5ms). Very low internal ...
Manufactured by:Spitzenberger & Spies GmbH & Co. KG based inViechtach, GERMANY
In the event of switching off or loss of function of the supervising supply network, islanding networks can appear. Within these the local generator is still driving the supply voltage and supplying the network connected loads without any monitoring and supervision of voltage level and waveshape and frequency of the power supply companies. ...
Manufactured by:Spitzenberger & Spies GmbH & Co. KG based inViechtach, GERMANY
Frequencies from 1.5kHz … 200kHz can be generated in laboratories and test systems with an output voltage of up to 270V. Testing of electronic components, capacitors and filters. Under voltages and over voltages as well as frequency variations can be simulated. It is possible to test all kinds of electrical and electronic devices (e.g. testing of high frequency measuring ...
Manufactured by:Spitzenberger & Spies GmbH & Co. KG based inViechtach, GERMANY
Frequency range of 15Hz - 1500Hz and an output power of up to 30kVA at cos Phi 0,7 (ind) -1 - 0,7 ...
Manufactured by:Spitzenberger & Spies GmbH & Co. KG based inViechtach, GERMANY
Test Pulses And Voltage Variations According To Iso Standards And Manufacturer Specifications. Test Pulses And Voltage Variations According To Iso Standards And Manufacturer Specifications. The modular simulation system ist very well designed to perform immunity tests with a pulse characteristic and with line coupling injection according to the following standards: ISO 7637, ISO 16750-2, ISO ...
Manufactured by:Spitzenberger & Spies GmbH & Co. KG based inViechtach, GERMANY
The Spitzenberger & Spies simulation system for aircraft supply networks is a modular test system. Depending on the aircraft type and the relevant specification we simulate the 400Hz AC networks with 115V/230V as well as the DC networks with 28V and 270V. In the according standards Airbus ABD0100.1.8/ABD0100.1.8.1, DO160, Boeing 787B3, AMD 24/C the test specifications for aircraft supply ...
Manufactured by:Spitzenberger & Spies GmbH & Co. KG based inViechtach, GERMANY
We use a single-phase simulation system to simulate the supply network of railway vehicles to meet the necessary voltage and frequency ...
Manufactured by:Special Power Sources based inAlliance, OHIO (USA)
The Field Stand is designed to elevate the power generator 25 inches (64cm) off the ground. This prevents the unit from resting in puddles, snow or mud. It allows air flow around the unit and physical access at waist level. The stand is painted steel and ships unassembled. For the 500 watt unit order p/n ARP500-FS. For the 1000 watt and 1500 watt unit order p/n ...
Manufactured by:Special Power Sources based inAlliance, OHIO (USA)
The exhaust vent is located on the lower right hand corner of the power generator. When deployed outside, the unit’s exhaust is typically discharged directly from the enclosure into the atmosphere. In certain installations (inside an equipment shelter or wherever excessive snow could build up and block the exhaust vent) the exhaust may have to be directly ducted to a specific area. This ...
Manufactured by:Special Power Sources based inAlliance, OHIO (USA)
This kit is externally mounted to the power generator. It includes a pressure regulator that can take a maximum of 125 psi and reduce it to the specified inlet pressure of 2 to 5 psi. Pressures over 125 psi must by depressurized before feeding the pressure regulator. Also included in this kit is a coalescing canister and filter that will capture any liquids in the incoming gas which could cause ...
Manufactured by:Special Power Sources based inAlliance, OHIO (USA)
Provides 500 watts of power; One of the most popular ratings; Adequately services a wide variety of power needs; Available with CSA ...
Manufactured by:Special Power Sources based inAlliance, OHIO (USA)
Provides 1000 watts and 1500 watts respectively; Feed multiple loads using one power generator to reduce operating costs; The RP1000 can be modified in the field to achieve a 1500 watt rating by switching out the Fuel Cell Bundle; Available with CSA ...
Manufactured by:Switchgear Power Systems LLC based inWinneconne, WISCONSIN (USA)
The Switchgear Power Systems Power Distribution Centers are custom engineered, environmentally controlled, pre-fabricated enclosure built to house electrical equipment. Each PDC is designed to meet the specific needs of a project. SPS Power Distribution Centers set the standard for flexibility, reliability and performance. ...
Manufactured by:Spitzenberger & Spies GmbH & Co. KG based inViechtach, GERMANY
Due to the climate change the use of regenerative energy sources is promoted increasingly. The use of solar energy is becoming more and more important. The ideal test system for solar inverters consists of a photovoltaic solar cell simulator (PVS), a mains supply system simulator (DM 90000/PAS) and a power recuperation unit (PRU) which reduces the energy consumption of the entire system by app. ...
Manufactured by:Spitzenberger & Spies GmbH & Co. KG based inViechtach, GERMANY
Free programmable I/V characteristic. Simulation of many different solar cells including partly shading is possible. Very fast reaction time on load changings, typically less than 100μs. Real simulation of the 100Hz Ripple on current and voltage of single phase inverters. I/V curve is reproduced very exactly. Simulation of dynamic irradiation, thermal characteristic and course-of-the-day of ...
Manufactured by:Spitzenberger & Spies GmbH & Co. KG based inViechtach, GERMANY
Consumes the generated power of the solar inverter and feeds it back into the mains. Reduces the heat exhaustion and therefore the power losses of the system. Increases the sink power capability up to 6 times the nominal value. Without influencing the simulated ...
Manufactured by:Switchgear Power Systems LLC based inWinneconne, WISCONSIN (USA)
Switchgear Power Systems metal-clad switchgear is available from 5kV-38kV in outdoor non-walk-in, indoor, and PDC enclosures. ...
Manufactured by:Switchgear Power Systems LLC based inWinneconne, WISCONSIN (USA)
When circuit breakers are not needed or desired, our cost-effective, ANSI class metal-enclosed switchgear with load interrupter is a viable option for your power distribution system ...