Afterburner Equipment In USA
-
Manufactured by Cire Technologies, Inc.based in USA
Cire Technologies has manufactured thermal afterburners since its inception. Our thermal afterburner units are used to destroy VOCs in high concentrations, to eliminate visible smoke or to destroy VOCs from processes that are operated intermittently to the point that heat exchangers are not economically ...
-
Manufactured by Epcon Industrial Systems, LPbased in USA
Epcon is an industry leader in Afterburner technology and can build a custom unit for stand alone or portable applications. We are experts in thermal process applications and Epcon is ready to design and manufacture your Direct Fired Afterburner. Our experienced engineers will assist on every level to ensure that the system accommodates your ...
-
PremiumManufactured by Matthews Environmental Solutionsbased in USA
The secondary chamber is where waste in the gaseous phase is treated. Combustion gases from the primary chamber are transferred into the secondary chamber for thermal treatment. Where necessary, the design and volume of the hamber will be established by the development of a computer Fluid Dynamic Model using Phoenics 2008 combustion and chemical reaction ...
-
Manufactured by Armil C.F.S., Inc.based in USA
For flashfire applications; Integral Inert Gas Extinguishing Chamber for wax reclamation; Operating temp range: 450°F to 2200°F; Uniformity: +/- 25°F; Integral Afterburner System; Manual or power driven car; Custom hearth ...
-
Manufactured by FireLake Manufacturingbased in USA
temperature. Available with LP, Natural Gas, or Oil burners. Afterburner is ...
-
Manufactured by Mansell and Associatesbased in USA
The 'FAT BOY' tilting rotary furnace is a complete packaged unit ready to hook-up and put to work, 'Plug and Play'. The unit is capable of melting aluminum, zinc, lead, brass, copper, gold, silver, etc. Installation costs are minimal - Set on Concrete, gravel, or dirt. Set Unit, Hook up electric and gas, and Go! Units are shipped in one ...
-
Manufactured by Burn-Easy R&K Incinerator, Incbased in USA
Dimensions 52 in. diameter x 9 ft. length. 375 tank thickness. Reinforced with 2x1 solid bar. Load capacity 2100 lb. 106 cubic foot chamber. Diesel, Propane, or Natural Gas Burner option. Voltage requirements 120 volt 60 HZ 20 Amp. Adjustable 12 hour timer. Unit is lined with repairable refractory block rated for 3000 degree temperature. Door is lined with 3 inches of ceramic fiber insulation ...
-
Manufactured by Burn-Easy R&K Incinerator, Incbased in USA
Dimensions 36 in. diameter x 7 ft. length. 375 tank thickness. Reinforced with 2x1 solid bar. Load capacity 700 lb. 35 cubic foot chamber. Diesel, Propane, or Natural Gas Burner option. Voltage requirements 120 volt 60 HZ 20 Amp. Adjustable 12 hour timer. Unit is lined with repairable refractory block rated for 3000 degree temperature. Door is lined with 3 inches of ceramic fiber insulation rated ...
-
Manufactured by Burn-Easy R&K Incinerator, Incbased in USA
Dimensions 42 in. diameter x 8 ft. length. 375 tank thickness. Reinforced with 2x1 solid bar. Load capacity 1200 lb. 58 cubic foot chamber. Diesel, Propane, or Natural Gas Burner option. Voltage requirements 120 volt 60 HZ 20 Amp. Adjustable 12 hour timer. Unit is lined with repairable refractory block rated for 3000 degree temperature. Door is lined with 3 inches of ceramic fiber insulation ...
-
Manufactured by SCHWING Technologies GmbHbased in GERMANY
INNOVACLEAN is a compact, environmentally and user friendly fluidized bed pyrolysis system which removes all polymers - even halogenated substances such as PVC or PTFE - quickly and reliably from small and medium-size tools and ...
-
Manufactured by Stelter & Brinck, Ltdbased in USA
Stelter & Brinckscrap preheatersboth dry and preheat at the same time. These units are designed to fit on top of material conveyors and weigh feeders intended for use with preheating. The units are completely self contained and feature high turn down, high velocity burner systems to provide high air flow rates for drying and high energy to drive the heat into the load. Stelter & Brinck ...
-
Manufactured by B&L Cremation Systems, Inc.based in USA
The B&L Cremation Systems, Inc. N-20SA human crematory is our low volume production system, with average cremation times of 150 minutes. ...
-
Manufactured by B&L Cremation Systems, Inc.based in USA
The B&L Cremation Systems, Inc. BLP 500 animal crematory is designed for medium veterinarian facilities. It is used for individual cremation or a maximum load size of 500 pounds. ...
-
Manufactured by SCHWING Technologies GmbHbased in GERMANY
MAXICLEAN is an environmentally and user friendly pyrolysis system (pyrolysis furnace, pyrolysis oven) for removing plastics without halogenated additives from especially large tools and ...
-
Manufactured by Gilson Company, Inc.based in USA
Gilson’s Binder Ignition System meets applicable ASTM and AASHTO standards, offering true economy in a simple, manually operated unit. Process times are comparable to automatic-weighing units, and extensive testing has proven that results equal or exceed the accuracy of automated systems. Standard 1,200—1,800g samples are processed in as little as 30—45 minutes. Larger samples ...
-
Manufactured by Catalytic Products International (CPI)based in USA
Catalytic Products International, Inc. is a worldwide leader in the design, manufacture, and installation ofhigh-quality air pollution control equipment. Our fume incineration systems are used in a variety of stationary source applications designed to destroy volatile organic compounds (VOC's), hazardous air pollutants (HAP's), odors, and other air ...
-
Manufactured by Pollution Control Products Co.based in USA
PCPC's Controlled Pyrolysis models have a highly effective patented system that anticipates and prevents overheating. The ovens have a highly sensitive control system for added protection and operational flexibility. These furnaces can remove the same combustible materials as Dry Cleaner models, but in greater quantities: 2% to 15% by ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you