Show results for
Refine by
Applications
- Combustion Technology for Alternative Combustibles
- Combustion Technology for Exhaust Gas and Air Combustion
- Combustion Technology for Hot Gas Production
- LowNOx Systems for Nitrogenous Fuels
- Burners and combustion solutions for steel industry
- Burners and combustion solutions for biogas plants sector
- Waste air combustion for municipalities
- Li-ion battery electrode manufacturing
- Solid Recovered Fuel (SRF) for the cement industry
- Air combustion for chemical plants
- Environmental solutions for the waste incineration industry
Burner System Equipment & Supplies In In Hungary
501 equipment items found
Manufactured by:Zantingh B.V. based inRijsenhout, NETHERLANDS
Manufacturer and supplier of Zantingh gas burner systems of capacity classes ranging from 1 to 15 MW since 1970. For smaller capacity gas and oil burners we cooperate exclusively with Unigas, the Italian manufacturer. The acquired expertise forms the basis for our current range of burner ...
Manufactured by:BKE Combustion Controls Co., LTD. based inLampang, THAILAND
BKE burner systems are also in use at temples around Thailand within their crematorium facilities. Our proven reliability and high safety standards make BKE burners the perfect choice for this important and highly-sensitive end-of-life ...
Manufactured by:Dürr Systems, Inc. based inDe Pere, WISCONSIN (USA)
Alongside complete Air Pollution Control Systems, Dürr also provides additional parts for upgrading existing systems. These may have been originally supplied by Dürr or by other manufacturers. Because the Oxi.X burner system is used for the combustion of pollutants, it falls into the category of thermal processes for ...
Manufactured by:Dunphy Combustion Ltd. based inRochdale, UNITED KINGDOM
The world’s focus on safety and environmental protection is steadily transforming old industrial processes into cleaner, more efficient practices. Dunphy process burners offer a clean combustion solution by reducing pollution & running costs, whilst maximizing heating performance and increasing overall production. Dunphy design a broad range of low NOx, ultra low-NOx ...
Manufactured by:John Zink Hamworthy Combustion based inTulsa, OKLAHOMA (USA)
We are a world leader in the design and development of duct burner systems engineered for the highest performance and lowest emissions on modern, high-efficiency turbines. Our duct burner systems for combined cycle and process installations provide uniform temperatures to help with higher steam production and a durable design to ...
Manufactured by:SPG Steiner GmbH based inSiegen, GERMANY
To minimise the formation of NOX and CO emission we have developed the PremaNOX® burner. The PremaNOX® is tested and approved by an independent German institute. ...
Manufactured by:PBS Power Equipment, s.r.o. based inTřebíč, CZECH REPUBLIC
The company PBS POWER EQUIPMENT, s.r.o. manufactures, installs and services process burners, which are produced for specific heating applications with wide range of fuels. Main difference between this type of burners and other types such as monoblock burners, power burners and so on is the application for which the burner is intended. Process burners are specific category of burner utilized in ...
Manufactured by:GEFA System AB based inGÄLLIVARE, SWEDEN
The Arctic Heat burner system improves fuel economy and reduces NOx in the exhaust. Arctic Heat can help bring economical and environmental benefits to your heating industry. Our customers often highlight the fact that they’ve experienced decreased fuel cost, less unburnt fuel and less NOx in the exhaust since they installed our burners. ...
Manufactured by:TPC GmbH based inHaiger, GERMANY
A P-tube consists of a single tube with a P-shaped bend at one end. As a suspended variant, they are the optimum solution for e.g. enameling furnaces, when annealing steel wire in piercing annealing lines, and all production lines where uniform heat distribution in the smallest possible space is important. We manufacture the bends from pressed half-shells with diameters of 158, 186, and 241 mm. ...
Manufactured by:DWS BVBA based inWijnegem, BELGIUM
To successfully use biogas as a fuel, our engineers can design and implement modification of the burners at your plant. Whether those are indirect water heaters, steam boilers, turbines – you can start to operate them in multi-fuel mode thanks to DWS’ custom solution. Duel-fuel or multi-fuel burners include the possibility of operation with two or ...
Manufactured by:The Onix Corporation based inPerrysburg, OHIO (USA)
These burners are capable of delivering From 400,000 to 120 MM Btu per hour, and can achieve temperatures of 2,000°F while saving money on every Btu used. Our full line of Solid Fuel Burners have many industrial applications including retrofitting natural gas burners, dryer heat source, heat for kilns, heat source for boilers, power ...
Manufactured by:Flare Products Limited based inStewartby, UNITED KINGDOM
The standard burner is normally used on applications where flame retention time and temperature are not so critical. Typically on this type of burner the size remains constant and quantity increases depending on the gas flow ...
Manufactured by:TPC GmbH based inHaiger, GERMANY
Double-P-tubes are increasingly used in the field of indirect heating of industrial furnaces. The Double-P-tube outperforms 'older' methods due to its excellent temperature distribution. We manufacture three-way and four-way tube bends from pressed half shells with diameters of 186 and 244 mm. The diameter of the centered pipe depends on the installation dimensions of the intended burner. The ...
Manufactured by:Flare Products Limited based inStewartby, UNITED KINGDOM
The high temperature burner is used for achieving a higher level of flame control and temperature. The flame is much shorter on this type of burner sitting just above the air ports. With this type of burner a temperature of 950 -1000°C can be expected without automatic air control. High temperature burners are generally becoming more widespread and are made of 304 stainless ...
Manufactured by:Siempelkamp Energy & Drying Solutions GmbH (formerly Büttner Energie- und Trocknungstechnik GmbH) based inKrefeld, GERMANY
Combined operation: combustion of dust, oil and gas. The industrial combination burner system BCB from Büttner functions as a flue gas generator for diverse industrial processes. Multi-fuel burners are commonly used to heat drum dryers or flash tube dryers. Büttner's multi-fuel burners are capable all-rounders and burn ...
Manufactured by:Detroit Stoker Company based inMonroe, MICHIGAN (USA)
Detroit Vertical Fire Technology utilizes a single, upward-firing burner in the furnace floor to eliminate the risk of flame impingement on boiler water walls. This lets a single burner provide the input capacity of several front or side wall burners. Multiple gas trains and complex burner management systems are ...
Manufactured by:Detroit Stoker Company based inMonroe, MICHIGAN (USA)
Efficiency and Versatility for Boiler Burner Applications: Fully integrated and tested system. Single source combustion system responsibility. Meets Federal and State air quality ...
Manufactured by:Detroit Stoker Company based inMonroe, MICHIGAN (USA)
Efficiency and Versatility for Boiler Burner Applications: Enhance performance of existing solid fuel grate-fired combustion systems. Includes Startup & Auxiliary function. Gain fuel switching flexibility. Increase efficiency. Improve load swing response. Lower operating costs. ...
Premium
Manufactured by:Bosch Industriekessel GmbH - Industrial Boilers based inGunzenhausen, GERMANY
The highly efficient UT-M is a three-pass boiler designed for 750 to 19,200 kW of heating at up to 16 bar. Its various output sizes and temperature ranges up to 190 °C enable flexible operation for countless process heat and heating ...
Manufactured by:Jiangsu Jufeng Thermal Technology Co.,Ltd based inYangzhou, CHINA
Brief introduction for rotary kiln burner: The Generalflame rotary kiln burner is mainly used in industrial use, both for different minerals calcination(lime/cement/manganese oxide/zinc oxide etc.), also for waste treatment. For easy and accurate operation, it normally adopts split type,... ...