Show results for
Refine by
Locations
- USA
- Alabama
- Alaska
- California
- Connecticut
- Florida
- Georgia (Us)
- Hawaii
- Idaho
- Illinois
- Indiana
- Kansas
- Kentucky
- Louisiana
- Maryland
- Massachusetts
- Michigan
- Minnesota
- Mississippi
- Missouri
- Montana
- Nebraska
- New Hampshire
- New Jersey
- New York
- North Carolina
- North Dakota
- Ohio
- Oklahoma
- Pennsylvania
- South Dakota
- Tennessee
- Texas
- Utah
- Washington
- Wisconsin
Combustion Control Equipment Supplied In Usa
92 equipment items found
Manufactured by:LAMTEC America Inc. based inHastings, MINNESOTA (USA)
The BT300 BurnerTronic Series combustion controllers are specially designed for small commercial monobloc burner applications. Optional expansion modules enable systems to be individually configured to meet specific application ...
Manufactured by:ClearSign Combustion Corporation based inSeattle, WASHINGTON (USA)
Electrically charged molecules, or ions, are a natural product of the combustion process. ClearSign’s Electrodynamic Combustion Control technology introduces computer-controlled electric fields to manipulate the movement of these ions and precisely control flame shape and the transfer of heat to, through, ...
Manufactured by:Tulsa Combustion based inSand Springs, OKLAHOMA (USA)
Safety, reliability and flexibility are vital to effective burner management systems. Tulsa Combustion designs and assembles control panels and skids in our own shop, using components as specified by our customers or with wide industry acceptance. We provide self-contained systems or sub-systems to be integrated into a plant’s DCS, for both new ...
Manufactured by:Bambeck Systems based inSanta Ana, CALIFORNIA (USA)
Stoichiometric Combustion Control creates a condition in the boiler where there is just enough oxygen (O2) available to oxidize each hydrogen and carbon atom from the fuel. To achieve this condition, you starve the combustion air until some carbon atoms cannot continuously get enough O2 in the furnace section of the boiler and CO is formed ...
Manufactured by:Clarke Energy based inLiverpool, UNITED KINGDOM
LEANOX is a lean-mixture combustion control. It was developed by GE's Jenbacher and has been patented worldwide. The system ensures the correct air to gas ratio under all operating conditions. This has the benefit of minimising exhaust gas emissions whilst maintaining stable engine ...
Manufactured by:Bambeck Systems based inSanta Ana, CALIFORNIA (USA)
Stoichiometric Combustion Control creates a condition in the process heater where there is just enough oxygen (O2) available to oxidize each hydrogen and carbon atom from the fuel. To achieve this condition, you starve the combustion air until some carbon atoms cannot continuously get enough O2 in the radiant section of the heater and CO is ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
Integral Motor / Pump, Low Inertia / Torque Ratio, Same options as 13x10 Models, Simplicity of Design, High Speed ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
Proportional Adjustable Ration Control, Pressure, DP, or Electronic Input, Uses Common Power Supply, Spindle, Slide, Bell Crank, or Geared Wheel Ration Adjusters, 235 to 45,000 lbs. of ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
Meets JIC Standards, 5 to 15 Horsepower, 500 to 900 PSI, 60 Gallon Reservoir, 10 to 20 ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
Double end, low by-pass leakage, 1 1/2" - 8" bore, bronze bearings, up to 1500 lbs, chrome plated cylinder rod, foot, flange, or pivot ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
The Model 13210 Proportlonal-Plus-Reset Hydraulic Controller Is designed for slow-reacting control applications that require stability. A group of controllers are supplied from a separate, but common power supply. The controller has a practical output range of approximately 235 to 45,000 pounds of force at the actuator. Model 13210 accepts pressure or differential ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
Five Gallon Reservoir, 125 to 230 PSI, Mounting for Two Controllers, External Pump for Easy Maintenance, 1/2 Horsepower Pump, Meets JIC Standards, 0.8 to 4.0 ...
Manufactured by:LAMTEC America Inc. based inHastings, MINNESOTA (USA)
The CMS offers absolute flexibility in the design and control of your combustion control system. CMS incorporates up to 18 analogue inputs (or 9 failsafe), 41 digital outputs, 60 digital inputs, and 10 channels for actuator/drive control depending upon module hardware configuration. Internally, CMS can provide up to 16 individual ...
Manufactured by:LAMTEC America Inc. based inHastings, MINNESOTA (USA)
The BC300 is a simple burner sequencer for industrial burners in thermal process plants. Designed for burners of all sizes, it can be used on continuous or intermittent operation applications. Control output can be single stage or two stage, with pneumatic or in cycle modulation. Flame monitoring can be ionization with single or twin electrode operation, UV tube, or F152 with ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
Integral Power Supply, Pressures up to 930 psi, 5.8 to 14.1 GPM, 3 to 7.5 Horsepower, 35 Gallon Reservoir, Proportional Control, Pneumatic or Electronic Inputs, Manual or Automatic ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
Integral Power Supply, Pressures up to 1000 psi, 10 to 40 GPM, 10 to 25 Horsepower, 100 Gallon Reservoir, Proportional Control, Pneumatic or Electronic Inputs, Manual or Automatic ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
Single End, Low By-Pass Leakage, 1 1/2' - 8' Bore, Bronze Bearings, Up to 1500 lbs, Chrome Plated Cylinder Rod, Foot, Flange, or Pivot ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
Proportional Control, Pressure, DP, or Electronic Input, Uses Common Power Supply, Spindle Set Point Adjusters, 235 to 45,000 lbs. ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
Ten Gallon Reservoir Eliminates the Need for Heat Exchanger, Pressure, Filter, and Level / Temperature Switches, Meets JIC Standards, 3.7 GPM, 100 to 300 ...
Premium
Manufactured by:PROMECON Process Measurement Control GmbH based inBarleben, GERMANY
The McON UBC system continuously measures the content of unburnt carbon in fly ash as the main combustion quality control parameter. The patented system works in-situ, without complicated sampling and for most robust and lowest maintenance requirements. The system is available in different configurations to suit your application. Your complete fly ash assessment ...