- Home
- Equipment
- australasia
- electric pump systems
Refine by
Applications
- Renewable Energy Solutions for Agriculture
- Hydrogen Fuel Cell System for Cars
- Fuel Cell System for Aviation Industry
- ORC System for Use of waste heat in the industry
- Microsteam - Turbine Power System for Commercial Applications
- Variable Phase Turbine for Industrial Applications
- Microsteam - Turbine Power System for Institutional Applications
- 1mw Compact Generator for Critical Infrastructure Support Power Systems
- CHP Unit for Natural Gas
- CHP Unit for Biogas
- CHP Unit for Industrial Facilities
- CHP Unit for Schools and Universities
- Energy Solution for Power Resilience
- Energy Solution for Reducing Energy Bills
- Energy Solution for Battery Buffered EV Charging
- Solar Solutions for Residential Scale
- Solar Solutions for Commercial Scale
- Solar Solutions for Utility Scale
- Solar Solutions for BIPV Solution
- Solar Power for Single-Family Home Builders
- Solar Power for Multifamily Builders
- Process heating for commercial and industrial functions
Electric Pump Systems Equipment & Supplies In In Australasia
1,022 equipment items found
Manufactured by:RST Irrigation Ltd. based inBrandon, UNITED KINGDOM
These electric powered pump systems control the speed of the motor/pump to provide the pressure and flow required. Prior to the existence of variable speed drives you either had to use expensive single stage pumps, or a pressure reducing valve, such as a Clayton valve. Whichever of these two ...
Manufactured by:OnSite FMS, by BENCO Products, Inc. based inTea, SOUTH DAKOTA (USA)
BENCO Motor Controllers offer a cost-effective solution for achieving precise application rates in systems using electric pumps. These controllers adjust pump pressure manually, akin to a dimmer switch, thus varying the flow rate and pressure without the need for complex and expensive systems. By directly ...
Premium
Manufactured by:Hilliard Corporation based inElmira, NEW YORK (USA)
Hilliard Electric Brakes provide positive stopping and reliable holding of rotating devices on demand-every time. Spring engaged when current is interrupted and electromagnetically relased when voltage is applied, these brakes are designed for maximum flexibility and long, dependable service. Each brake has an easy-to-adjust wear bolt to compensate for friction service wear and extend the life of ...
Premium
Manufactured by:Bosch Industriekessel GmbH - Industrial Boilers based inGunzenhausen, GERMANY
The ELSB (Electric Steam Boiler) is a highly efficient, electrically heated steam generator for 350 to 7,500 kg/h steam at up to 24 bar. When operating with green energy, the boiler allows your company to achieve a CO2-neutral steam supply. Generate up to 7.5 t/h steam in a highly efficient way using just electricity – no combustion, no emissions. High steam quality, excellent dynamics, ...
Premium
Manufactured by:F.A.S.T. GmbH - Groupe Claire based inLangenbrettach, GERMANY
Electrical resistance data logger for brandes. District heating pipelines or similar systems. Battery operated, lasts for up to 5 years. Software hs log free and easy to use. Ip66 housing with grommet for the wires. Connecting to brandes system ...
Manufactured by:Stäubli Electrical Connectors AG based inAllschwil, SWITZERLAND
This system has been designed to create a pull-out electrical connection between two systems of double-pole insulated busbars. It is made up of MC Multilam contact element strips, mounted in a plastic frame of variable sizes. The CLIPLAM can easily be attached to silver-plated busbars of varying thicknesses between 2 and 5mm by means of two clips. The electrical contact is established by the MC ...
Manufactured by:Henan Demeter Machinery Co., Ltd based inZhumadian City, CHINA
Gantry feeding system can be used for a type equipment and h type equipment. it is fully automatic feeding ...
Manufactured by:Energetix Solutions Inc. based inWalnut Creek, CALIFORNIA (USA)
The S Series Electro-Explosive devices consist of two tinned brass arms embedded in a polymer clip. The bridgewire is welded and crimped at the tip of the arms and then coated with a primary reactive composition and an energetic charge. The interface hardware is welded to the fusehead terminals per customer specifications. The robust base structure provides excellent resistance to environmental ...
Manufactured by:Urban Disposal Solutions based inYunusemre, TURKEY
Our Electric laundry chute system doors are equipped with a 24V electric strike and a microswitch to indicate door status changes (open or closed), allowing monitoring across different floors. This feature enables electric locking of the hopper doors for laundry chute maintenance or interlocking when any door is ...
by:ABL based inPegnitz, GERMANY
With the invention of the SCHUKO plug, our company founder Albert Büttner set a new standard for electrical connecting devices in 1925. SCHUKO is short for the German 'Schutzkontakt' (protected contact). Because of its circular geometry and two protected contacts, SCHUKO is regarded as especially safe to use in comparison with other electrical connecting device systems. The success ...
Manufactured by:VadaTech Inc. based inHenderson, NEVADA (USA)
The AMC754 is a Processor AMC in a single module, mid-size, based on the Intel® 5th generation Xeon 4-core, 8-core or 16-core Processors (Broadwell). The efficient SoC design has low power consumption and integrated PCH technology. The module follows the AMC.1, AMC.2 and the AMC.3 ...
by:ReadyFlo Systems LLC based inCorpus Christi, TEXAS (USA)
PLC panels built to your specification with the highest level of quality. From Allen Bradley to Schneider Modicon, our large climate controlled panel shop can build your PLC panels, small and large, with unmatched attention to detail. ...
Manufactured by:Reivax North America, Inc. based inMontréal, CANADA
The SNX is a robust and efficient system for adjusting and controlling the timing of a generating unit to the electrical system, quickly and accurately adjusting the frequency and voltage of that machine. The SNX lets you choose between two bars, electrically separated and with different measurement instruments for timing the machine. By sending pulses to the speed governors and voltage occurs ...
Manufactured by:Sinoleader Industries Group Co., Ltd. based inShanghai, CHINA
This machine is mainly used for drawing Φ1.8-Φ4.75 round copper rod. The drawing capstans is tandem arrangement. The 12 PCS drawing capstan and final capstan are driven by 2 DC motors individually. The dies can be changed quickly and it is very convenient for operation. The electrical control system is managed by PLC with 10’ touching screen for convenient ...
Manufactured by:Welders Filtration Technology (WFT) based inAalst, BELGIUM
WFT can modify your existing filters (also not WFT products) to the current way of working and therefore do following actions on site in your facilities: Repainting of the press frame. Supply and installation of new plates and cloths. Customize your installation to the European machine Directive. Refresh or adjust plate shifting system. Adjusting the control box. Study the flow chart and make ...
Manufactured by:INSTAR Robotics based inCERGY, FRANCE
The TROOPER Scholar from INSTAR Robotics is a versatile robotic platform designed for both indoor and outdoor research applications. It operates on a fully electrical system, providing reliable performance in various environments. The platform boasts robust connectivity options, ensuring seamless integration with other systems and devices. Its construction emphasizes resistance and durability, ...
Manufactured by:Cranston Machinery Co., Inc. based inOak Grove, OREGON (USA)
The RapPress is Cranston’s glue system for dry sheeted pulp bales. It is a portable machine, powered by pneumatic and electric systems. The adhesive applicators are mounted into the adjacent wrapper dispenser or folder and the presses are positioned in the strapping station’s conveyor where the wrapper is pressed. Production varies depending on environmental and material conditions. A ...
Manufactured by:Michaud Group based inViriat Cedex, FRANCE
The Fuse Cutout Sleeve 100A is engineered to accommodate a 22x58 fuse cartridge, a neutral tube, or a mini-switch, and is specifically designed for environments devoid of mechanical loads. It features mechanical tightening terminals, allowing for easy installation with a basic spanner. The cutout sleeve facilitates the opening and closing operations under a load of up to 63A, ensuring reliable ...
Manufactured by:SINOHERS based inBeijing, CHINA
Fuel : Methanol. Electricity output : 220V AC. Operating modes : Off-grid Grid-Connected. Heat output : 50-85°C Hot ...
Manufactured by:United Enertech Corporation based inChattanooga, TENNESSEE (USA)
Model CD-100-ERC was developed as a rectangular damper alternative to manual cable remote systems. It provides personal convenience and a positive means of individual room or zone air ...