Show results for
Refine by
Flare Stack Equipment Supplied In Usa
29 equipment items found
Manufactured by:Universal Analyzers - AMETEK, Inc based inCarson City, NEVADA (USA)
The Model 270F is a Flare Gas Probe Assembly consisting of the filter body mounted in a NEMA 4X stainless steel enclosure. A blowback system is provided to allow the blowback to occur on command from a data logger, PLC or UAI timer card or external switch mounted in a safe ...
Manufactured by:Tornado Combustion Technologies based inCalgary, ALBERTA (CANADA)
Tornado's steam-assisted flare stacks are designed to combust heavy hydrocarbons with no smoke emissions when there is a source of high-pressure steam available on ...
Manufactured by:Tornado Combustion Technologies based inCalgary, ALBERTA (CANADA)
Tornado's air-assisted flare stacks are designed to eliminate smoke emissions when combusting heavy hydrocarbons. Smoke emissions are the result of inefficient combustion of the waste gas producing unburnt hydrocarbon particles, often caused by an insufficient fuel/oxygen content ratio. ...
Manufactured by:Tornado Combustion Technologies based inCalgary, ALBERTA (CANADA)
Tornado's High Pressure or Low Pressure gas-assisted flare stack designs can eliminate smoke (HP Gas-Assist) or sour gas odours (LP Gas-Assist) on site. These designs can also be used to ensure efficient combustion in the most challenging of weather ...
Manufactured by:Frederick Cowan Products by ICI based inWestminster, MARYLAND (USA)
Useful on many non-retract applications. Uses same ignition electrode as 12 Joule units or works with compact 3/8" Dia. Probes. Special gas and “Flare Stack” models available. ...
Manufactured by:Phoenix Environmental Products USA based inBROWNSVILLE, TEXAS (USA)
FAV Systems Inc. Has designed and tested the FAV Systems ESD Knockout Drum Combination to prevent the flooding of flare stacks and tanks, which costs many dollars to clean up, and may cause environmental mishaps, grass or crop ...
Manufactured by:MRW Technologies, Inc. based inGlenpool, OKLAHOMA (USA)
In order to utilize the same flare stack for different waste streams or streams with significant turndown, a staged flare may be the most economical option. MRW has proved itself a leader in solutions for these often-difficult applications. Our innovative flare tips and layouts allow for efficient and effective ...
Manufactured by:Tornado Combustion Technologies based inCalgary, ALBERTA (CANADA)
The Tornado Pilot Monitoring and Auto-Relight (TPMR) System is the most reliable ignition system for flare stacks. The TPMR System consists of a continuous pilot and a self-contained relight system, with very low fuel consumption (25 SCFH). The assembly is fully retractable to grade for easy inspection and servicing without the need for ladders, platforms, ...
Manufactured by:Hero Flare LLC based inKellyville, OKLAHOMA (USA)
When steam or electric is not available on-site, our high pressure gas assist or air assist technologies are viable options to achieve smokeless capacity. This technology can also be used to retrofit an existing flare stack that is experiencing smoke formation and outside of the environmental compliance ...
Manufactured by:Aereon, part of Cimarron group based inLegnano (MI), ITALY
Whenever a process requires that entrained droplets be removed from a vapor stream, a knockout drum should be integrated into the system. Condensation can occur when hot process gases cool considerably in the flare gas header and riser, and some gases also go to dew point at ambient temperatures and pressures and can therefore generate liquids. These droplets must be removed in ...
Manufactured by:Hero Flare LLC based inKellyville, OKLAHOMA (USA)
The flare ignition system is one of the most critical components on any flare system to ensure the flare gas is ignited under any conditions. HERO offers the best available flare pilot technologies to meet your specific application. With thousands of pilots in service, our Hotspot Ignition System™ utilizes the most reliable ...
Manufactured by:Aereon, part of Cimarron group based inLegnano (MI), ITALY
Flame front generators are effective, time proven ignition systems which have been widely used in flaring applications for decades. The inherent reliability, rugged construction, ease of operation, and its economic advantages have allowed the flame front generator (FFG) to remain one of the most popular forms of pilot ignition in the industry. The FFG is easily adaptable to any ...
Manufactured by:ACL Combustion Inc. based inMoore, OKLAHOMA (USA)
It monitors three separate thermocouple inputs that can be used for temperature control in process applications such as tanks, heater/treaters, fired separators, line heaters, re-boilers or any other applications where accurate temperature monitoring and/or control is required. The CSC400-FD can be configured to be used on forced draft incinerators, combustors, and air-assisted ...
Manufactured by:Waterford Tank & Fabrication, Ltd based inBeverly, OHIO (USA)
Both horizontal and vertical design are common configuration for knockout drums. These vessels can commonly be referred to as flare knockout drums, flare drums, flash drums, knockout pots and compressor suction drums. Waterford Tank and Fabrication’s knockout drums can be installed upstream of natural gas compressors, engines and generators, upstream of ...
Manufactured by:Hero Flare LLC based inKellyville, OKLAHOMA (USA)
Utility Aares are the most economical Aare solution for those applications that do not require smokeless capacity, or for those applications where the waste gas will burn smokeless without the need for smokeless Aare technology Utility Aare technology is commonly used for emergency release cases as a back-up in the event an upset condition occurs and the gas is directed to the ...
Manufactured by:Callidus Technologies - part of UOP, a Honeywell Company based inTulsa, OKLAHOMA (USA)
The Demountable flare system provides flexible flaring operations to so that you can place multiple risers on a single support structure. They also allow you to perform maintenance to the tip at grade with minimal use of personnel at elevation. The demountable flare system features a derrick with the riser or risers mounted in such a way to permit lowering the flare tip to grade for service ...
Manufactured by:Hero Flare LLC based inKellyville, OKLAHOMA (USA)
Flame Front Generators are a traditional method of lighting flare pilots. An FFG panel mixes plant air and fuel gas into an ignition chamber. A spark plug ignites the mixture. The 'flame front' travels through a 1' pipe to flare ...
Manufactured by:Aereon, part of Cimarron group based inLegnano (MI), ITALY
The Sentinel flame monitor reliably provides remote flame detection up to 550 feet away, durability, ease of maintenance and rapid response time. If the monitor detects the absence of a flame for an adjustable amount of time, a set of dry form C contacts are activated and the pilot re-ignition system is set into motion. Response times are markedly quicker than those of a standard thermocouple ...
Manufactured by:Hero Flare LLC based inKellyville, OKLAHOMA (USA)
HERO Flare is a leading supplier for providing proven Air Assist technology to achieve smokeless capacities. Low pressure air is an excellent method for smoke free combustion of heavier gas streams. The flare gas and blower air flow coaxially to the flare tip where they mix. The blower air provides a significant portion of the stoichiometric air required for combustion and generates sufficient ...
Manufactured by:Fives I.T.A.S. s.p.a. based inMonza, ITALY
Elevated flares are vertical stacks used to dispose of waste gases through combustion; the “flare tips” (flare burners) are located at the top, which ensures personnel, plant and environment safety. ITAS elevated flares range from low-investment small utility stacks up to the tallest ...