Refine by
Fuel Testing Equipment Supplied In Europe
49 equipment items found
by:Core Laboratories based inRotterdam, NETHERLANDS
The model F-1/F-2 Combination CFR engine is used to determine the octane quality of gasoline and fuel blending components. This unit is recognized and approved by ASTM D2699 and D2700. This unit is equipped with a heavy duty CFR-48D type crankcase, variable compression cylinder, carburetor with adjustable fuel to air ratio, and knock measurement ...
by:Core Laboratories based inRotterdam, NETHERLANDS
The model F-5 CFR engine is a complete system for diesel fuel cetane number determination, conforming to ASTM D613 Standard Test Method for Cetane Number of Diesel Fuel Oil. This method is accepted worldwide as the standard for determining the ignition quality of diesel ...
by:Core Laboratories based inRotterdam, NETHERLANDS
The model FIT (Fuel Ignition Tester) is a desktop analyzer designed to rate derived cetane number. The FIT conforms to ASTM D7170 and IP method #PM-DI-05 to provide automated analysis of diesel fuel DCN. The analyzer is easy to use, compact and robust with a simple computerized operator interface. Maintenance of the FIT is ...
Premium
Manufactured by:Smart Testsolutions GmbH based inZentrale Stuttgart, GERMANY
The CVM measurement modules for precise cell voltage measurement on fuel cells, batteries and electrolyzers have proven themselves hundreds of times and deliver reliable measurement results even in harsh field conditions. Thanks to a variety of interfaces, they can be used excellently with common PC systems as well as in embedded systems. For processing the measurement signals and combining them ...
Premium
Manufactured by:Smart Testsolutions GmbH based inZentrale Stuttgart, GERMANY
The CVM systems with MASTER feature comprehensive functionalities and high-speed data transmission and processing. A complete system consists of the number of CVM G5 measuring modules required for the respective application, a bus module, a termination module and a process module. Adding the process modules Master or SlimMASTER to the measurement module stack enables more comprehensive as well as ...
Premium
Manufactured by:Smart Testsolutions GmbH based inZentrale Stuttgart, GERMANY
For the commissioning and testing of cell voltage measurement electronics and FuelCell control units, and in particular for the software testing of such ECUs, it is necessary to simulate cell-specific voltage values. The simulation modules of the MCM IntelliSim series, in conjunction with a master module enable active simulation of a fuel cell ...
Premium
Manufactured by:Smart Testsolutions GmbH based inZentrale Stuttgart, GERMANY
With test systems for Fuel Cell Control Units (FCCUs), developers can test the electronic components of fuel cell or battery systems without needing a real system. An essential component of the systems we develop for our customers is therefore cell voltage simulation (CVS). ...
Premium
Manufactured by:AMETEK Spectro Scientific based inChelmsford, MASSACHUSETTS (USA)
The FDM 6000 is a portable, battery operated fuel dilution meter that determines the concentration of fuel dilution present in an oil sample within a matter of minutes. The FDM 6000 uses a unique patent pending fang design to pierce the cap of a disposable sample vial and draws in the headspace from the vial. The headspace flows over a SAW (Surface Acoustic Wave) ...
Manufactured by:Grabner Instruments - AMETEK based inVienna, AUSTRIA
The MOBILE FUEL LAB is the ideal solution for fast and precise fuel quality checks in the field. Equipped with the portable, rugged and fully automated analyzers of Grabner Instruments, a detailed fuel analysis can be performed in less than 30 minutes by a single person directly on-site. The GRABNER INSTRUMENTS Mobile Fuel Lab ...
Manufactured by:Carbolite Gero Ltd - part of Verder Scientific based inHope, UNITED KINGDOM
The CAF G5 is a furnace designed to test ash fusibility, and optionally, the increasingly popular determination of biomass or solid recovered fuels testing. The coal ash fusibility test furnace conforms to the Standards ISO 540:2008; ASTM D 1857 / D1857M – 04 (2010); DIN 51730:2007-09; DD CEN/TS 15370-1:2006 (biomass) and ...
Manufactured by:Greens Combustion Limited based inPoole, UNITED KINGDOM
To enable Greens Combustion to develop their burner portfolio, we have a purpose built testing facility and also utilise parners in Europe to allow us to further enhance our testing ...
Manufactured by:PCS Instruments based inLondon, UNITED KINGDOM
Peak Hertzian contact pressures typically range from 1.8 GPa in gears and cams to 3.5 GPa in rolling bearings and toroidal traction drives. The PCS-ETM enables tribological phenomena to be studied over the full range of ...
Manufactured by:LEANCAT s.r.o. based inPraha, CZECH REPUBLIC
Single-cell testing is a great tool for the research and development of materials for fuel cells. Well-defined and repeatable conditions of Leancat PBT enable benchmarking of fuel cells also thanks to extensive scripting ...
Manufactured by:KRAL GmbH based inLustenau, AUSTRIA
KRAL single stations guarantee maximum functionality and safety of supply for firing systems with liquid fuels. The tried and tested KRAL single station design is used for supplying fuel to burners wherever customers require a specific single component setup. In larger firing systems, there are usually two or more burner systems installed. ...
Manufactured by:Hydrotechnik GmbH based inLimburg, GERMANY
Wide measuring range combined with extremely high measuring accuracy and reproducibility Wide viscosity range; performance virtually unaffected by different viscosities Heavy-duty construction for high operating pressures and resistance up to 630 bar Integrated flow direction ...
Manufactured by:LEANCAT s.r.o. based inPraha, CZECH REPUBLIC
Research and development of solid oxide fuel cells poses specific requirements to the testing equipment, as it must operate at high temperatures. Leancat STS-10 satisfies all requirements of SOFC testing with the ability to preheat inlet gases and extensive scripting ...
Manufactured by:Fuel Doctor based inKington, UNITED KINGDOM
100 x individual test kits for detection of water in diesel fuel in standard kit. You can order as little as 10 test kits up to 100 test kits in the one storage box, just ask for a quote. Test kits shipped in vial storage box with hinged lid. Style / color of storage box may change a little from product images. 5 ...
Manufactured by:Fuel Doctor based inKington, UNITED KINGDOM
100 x individual test kits for detection of water in diesel fuel in standard kit. You can order as little as 10 test kits up to 100 test kits in the one storage box, just ask for a quote. Test kits shipped in vial storage box with hinged lid. Style / color of storage box may change a little from product images. 5 ...
by:Kratzer Automation Test Systems based inUnterschleißheim, GERMANY
Vehicle Energy Systems VES3.1 are specially adapted to test bench operation requirements and features: High dynamics and precision. Quiet operation. Integrated battery models. Performance ranges from 10 kW to 1050 kW. Double performance by parallel connection at full dynamic. Comprehensive security features. Customization for integration into a test bench environment. Current and/or voltage ...
by:Tanknology Inc. based inAustin, TEXAS (USA)
An Economical Way To See What's Happening Inside Your Tanks. Problems inside a UST like corrosion, cracking, blistering, de-lamination - issues that compromise your fuel and could lead to catastrophic consequences to your site - are notoriously hard to pinpoint. Getting a good clear look at what's happening inside the tank is difficult and expensive. The TankCam Inspection from Tanknology is the ...