Show results for
Refine by
Gas Line Equipment Supplied In Usa
58 equipment items found
Manufactured by:Bruest Catalytic Heaters based inIndependence, KANSAS (USA)
Bruest HOTCAT natural gas line heaters uses Bruest’s catalytic heater panels as the heat source. The catalytic heater panels convert the fuel gas to CO2, water vapor, and infrared heat with virtually no NOx in the process. The process begins by preheating of the catalyst with electric power. Electric power is required for 20 to 30 minutes ...
Manufactured by:Sterlitech Corporation based inAuburn, WASHINGTON (USA)
Female threaded locking ring enables filter changes without removing the holder from connecting gas lines. Dual support screens protect the membrane filter from reverse pressure surges and allow forward and reverse flow from either inlet or outlet. Applications: ultraclean and sterilize air and other gases including compressed gases, in-line ...
Manufactured by:Adamant Valves based inLake Forest, CALIFORNIA (USA)
Can be used for gas side or liquid side. Can handle pressures up to 200psi (really, what would you be doing using that much pressure?) 1/4" ID x 7/16" OD Sold by the ...
Premium
Manufactured by:DILO Armaturen und Anlagen GmbH based inBabenhausen/Schwaben, GERMANY
For efficient handling of SF6/N2/CF4 gas mixtures. For this special application we supply different high performance devices. Thus efficient handling of large volume GIL lines is no ...
Premium
Manufactured by:Fluid Components International LLC. (FCI) based inSan Marcos, CALIFORNIA (USA)
The FS10i is a compact, economical solution to natural gas flow metering. Utilizing application proven thermal mass flow technology, the FS10i provides a highly accurate and repeatable linearized 4-20 mA output of flow rate. It was the first thermal flow meter, and is currently the only one, to comply with SIL 2. Additionally, for applications benefiting from a high or low flow alarm point, the ...
Manufactured by:Benchmark based inGrass Valley, CALIFORNIA (USA)
Benchmark Thermal provides the semiconductor industry with a full complement of thermal components with the following features: Uniform or profiled heat throughout or in discrete zones, Temperatures to 475 DegF (246 DegC), Temperature control through thermocouples or imbedded thermostats, Overtemperature protection through thermostats or thermal fuses, Control of surface temperature by insulation ...
Manufactured by:Power Trac based inTazewell, VIRGINIA (USA)
4’4” lift height. 22HP gas line engine. 4-wheel hydr static drive. 40+ attachments available. Hydraulic perated Quick Attach. Articulated Steering. Tractr width: ...
Manufactured by:Olympus Technologies, Inc. (OTI) based inEugene, OREGON (USA)
Protects gas lines from periodic fouling with digester ...
Manufactured by:Van Gas Technologies based inLake City, PENNSYLVANIA (USA)
GasDry Max is the highest performing absorbent deliquescent desiccant available on the market, for natural gas dehydration. GasDry Max can meet pipeline moisture specifications and is ideal for the most demanding natural gas dehydration applications, where natural gas producers and transporters need to prevent gas ...
Manufactured by:Reef Industries, Inc. based inHouston, TEXAS (USA)
Locate, identity and protect gas and oil lines from unwanted dig-ins by installing Terra Tape underground warning tape over your buried gas lines. This underground warning tape will provide continuous protection, alerting workers to stop digging. Terra Tape® is available in detectable as well as non-detectable grades. ...
Manufactured by:Aereon, part of Cimarron group based inLegnano (MI), ITALY
More importantly, the Energex pilot provides instantaneous re-ignition if the pilot should ever lose its flame. This pilot system uses a fuel gas line much like other standard pilots, however instead of a flame front generator it utilizes an excitor capable of producing a high voltage arc inside the pilot nozzle. Due to the integral location in the pilot head, ...
Manufactured by:American Gas Safety LLC based inTampa, FLORIDA (USA)
This is your basic CSD-1 safety setup in a mechanical room to isolate gas or power to the boilers in an emergency. AGS only supply the highest quality emergency buttons for increased longevity and reliability. AGS gas solenoid valves can be used to shutdown gas lines or the emergency button can be wired in conjunction with the ...
Manufactured by:Aereon, part of Cimarron group based inLegnano (MI), ITALY
This electric pilot provides a rapid, direct spark every 10 to 20 seconds, ensuring reliable ignition. The Model 850 features an inspirator that induces air into the fuel gas line, creating a combustible mixture for the pilot to ...
Manufactured by:AB Holding SpA based inOrzinuovi (BS), ITALY
The ECOMAX Natural Gas line makes available to the industrial and commercial sector cogeneration plants fueled with methane gas, which combine structural compactness and versatility with high energy ...
Distributed by:ap+m based inBoynton Beach, FLORIDA (USA)
ap+m supplies parts and services for many types of GE aeroderivative gas turbines. Below are some of the more commonly used engine types. The GE LM2500 is the workhorse of aeroderivative gas turbines, with more than 1,500 units in service and over 22 million operating hours with a variety of fuels and fuel/water combinations. ...
Manufactured by:Alternate Energy Systems, Inc. based inPeachtree City, GEORGIA (US) (USA)
They represent large loads, and allow the system to be tested under simulated load conditions. AES manufactures standard test flares with 2" or 3" gas lines. Other flares for specific systems are available as customer specials. All AES test flares are equipped with automatic ignition, standing pilot, stainless steel parts, Electronic Flame Safe-guard, and ...
Manufactured by:AB Holding SpA based inOrzinuovi (BS), ITALY
With the ECOMAX Landfill Gas line, AB offers a series of solutions to transform the controlled storage of waste into electrical and thermal energy, to be used directly on site or to be transferred to the ...
Manufactured by:Shand & Jurs (L&J Technologies & L&J Engineering) based inHillside, ILLINOIS (USA)
The Shand & Jurs Biogas 97200 Flame Check provides an in-line barrier against flame flashback in small gas lines. They are typically installed in pilot lines supplying fuel burning devices used in flares and waste gas burners. They are also used in vent piping servicing manometer pressure taps and diaphragm ...
Manufactured by:Aereon, part of Cimarron group based inLegnano (MI), ITALY
The Model 245 Fuel Efficient Flare Pilot is a high alloy, stainless steel pilot composed of fuel gas line, ignition line, inspirator and optional thermocouple. The pilot head assembly includes a 310 stainless steel flame retention nozzle and wind shroud for extended service life capable of sustaining a stable flame in winds of up to 150 mph. Fuel ...
Manufactured by:Xchanger, Inc. based inHopkins, MINNESOTA (USA)
The HP Series Heat Exchangers are designed to efficiently heat and cool pressurized gas streams at pressures up to 100 PSIG. These heat exchangers are commonly used in applications such as aftercooling, dehumidifying, and heating air delivered from compressors in pneumatic conveying, air separation, and charge-air systems. The design features a removable heat exchanger core, ...