Show results for
Refine by
Generators Diesel Generators Gas Based Generators Equipment Supplied In Sweden
10 equipment items found
by:Cortus Energy based inKista, SWEDEN
In the gasifier the char powder is mixed with steam, heat is provided indirectly through radiation which enables the chemical reactions that form the energy gas. The heat is generated through combustion of the pyrolysis gas, simultaneously the tars are cracked into harmless components. The gasifier concept is similar to the well proven technology used when gasifying fossil coal with steam i.e. a ...
Manufactured by:Naneco Innovations AB based inRönninge, SWEDEN
The ECO400 is a specialized nanobubble generator designed to produce up to 8 trillion nanobubbles per minute. Utilizing advanced nanobubble or ultrafine bubble (UFB) technology, this device provides an efficient solution for enhancing various industrial processes. Though it primarily operates with a manual control system, the ECO400 can integrate a timer module for automation. Optional gas ...
Manufactured by:Biogas Systems AB based inSunne, SWEDEN
The gas engineuses the energy content of the gas to generate electricity. Biogas may need cleaning before it is fed to the engine. As a rule of thumb, one-third of the biogas is turned into electricity and two-thirds is turned into heat. The generation efficiency of gas engines run on biogas is around 38-40 per cent. When heat production is included, the overall system efficiency is around ...
by:Cortus Energy based inKista, SWEDEN
WoodRoll is based on combining the three processes: drying, pyrolysis and gasification: These three processes are linked to each other while keeping them physical separated. As processes are separated the impurities can be separated from the generated energy gas. The impurities leaves with the pyrolysis gas that is formed during the pyrolysis. The other part that is formed during pyrolysis is ...
by:Cortus Energy based inKista, SWEDEN
WoodRoll is an allotherm process which means the heat (energy) needed to run the process is generated within the process itself. When combusting the pyrolysis gas heat is generated. The heat is utilized / recovered first at the gasification process which works at the highest temperature and then at the pyrolysis and dryer processes which works at lower temperature levels. As the heat is recovered ...
Manufactured by:Biogas Systems AB based inSunne, SWEDEN
The compressed intake air and biogas are ignited in the combustion chamber. The gases then pass through the turbine at high pressure and drive the generator. A turbine installation consists of a complete turbine assembly with gas compressor and monitoring equipment, with or without a heat exchanger for producing hot water. Biogas Systems AB supplies gas turbines with a generation capacity of 100 ...
Manufactured by:David Brown Santasalo Gears Oy based inJyväskylä, FINLAND
High speed gears are important components in many essential applications including compressors, generators and pump drives. The HX series of gearboxes provides a noticeable improvement in performance as well as packaging flexibility. All of our HX series of gearing products come with a five year warranty to give you piece of mind. ...
Manufactured by:Ennox Biogas Technology GmbH based inHard, AUSTRIA
In general the design for those flares is the same as for our standard flares. In accordance with the project-specific requirements (for example special gas composition, high gas temperatures or pollution) specific technical solutions and equipment are added. In principle all pyrolysis gas flares are individually customized, designed and calculated. All syngas flares have an own supporting burner ...
Manufactured by:Körting Hannover AG based inHannover, GERMANY
A better technology to solve emission problems. Can be executed as a fan-assisted dust- / oil- / gas burner, Duoblock construction form, up to 75 ...
Manufactured by:Körting Hannover AG based inHannover, GERMANY
Oil / Gas burner with blower in Monoblock construction form with digital firing management up to 16 ...